{"title":"Radium — Toyota \/ Lexus","description":"\u003cp\u003eRadium Engineering parts for Toyota \/ Lexus applications. Select the correct part number and confirm vehicle fitment.\u003c\/p\u003e","products":[{"product_id":"radium-m14-inverted-flare-to-6an-male-fittings","title":"Radium M14x1.5mm Inverted Flare Fittings — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e14-0118 M14x1.5 Inverted Flare to 6AN Male Long\u003c\/li\u003e\n\u003cli\u003e14-0121 M14x1.5 Inverted Flare to 6AN Male Short\u003c\/li\u003e\n\u003cli\u003e14-0921 10AN ORB to M14x1.5mm Inverted Flare\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese machined 6061 aluminum adapter fittings will convert the OEM hard line flare fitting for many American, Japanese and German vehicles. The surface finish is type-II anodized to resist all fuel types including methanol, ethanol, and E85.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"14-0118 M14x1.5 Inverted Flare to 6AN Male Long","offer_id":67591210467601,"sku":"14-0118","price":24.95,"currency_code":"USD","in_stock":true},{"title":"14-0121 M14x1.5 Inverted Flare to 6AN Male Short","offer_id":67591210500369,"sku":"14-0121","price":24.95,"currency_code":"USD","in_stock":true},{"title":"14-0921 10AN ORB to M14x1.5mm Inverted Flare","offer_id":67591210533137,"sku":"14-0921","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/14-0118n.jpg?v=1790637911"},{"product_id":"radium-fuel-rail-adapters","title":"Radium Fuel Rail Adapters for OEM Components — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0301 FPR Adapter 8AN ORB 11mm Bore 39mm Spacing M6 — 8AN ORB to OEM FPR Adapters\u003c\/li\u003e\n\u003cli\u003e20-0302 FPR Adapter 8AN ORB 16mm Bore 39mm Spacing M6 — 8AN ORB to OEM FPR Adapters\u003c\/li\u003e\n\u003cli\u003e20-0303 FPR Adapter 8AN ORB 11mm Bore 32mm Spacing M5 — 8AN ORB to OEM FPR Adapters\u003c\/li\u003e\n\u003cli\u003e20-0595 FPR Adapter 8AN ORB 7mm Bore 39mm Offset M6 — 8AN ORB to OEM FPR Adapters\u003c\/li\u003e\n\u003cli\u003e20-0603 FPR Adapter 8AN ORB 7mm Bore 39mm Spacing M6 — 8AN ORB to OEM FPR Adapters\u003c\/li\u003e\n\u003cli\u003e20-0842 FPR Adapter 8AN ORB 16mm Bore 50mm Spacing M6 — 8AN ORB to OEM FPR Adapters\u003c\/li\u003e\n\u003cli\u003e14-0285 FPR Adapter 8AN ORB to M12x1.25 Female — 8AN ORB to OEM FPR Adapters\u003c\/li\u003e\n\u003cli\u003e20-0459 FPD Adapter 8AN ORB 27mm Bore — 8AN ORB to OEM FPD Adapters\u003c\/li\u003e\n\u003cli\u003e20-0460 FPD Adapter 8AN ORB 11mm Bore 42mm Spacing M6 — 8AN ORB to OEM FPD Adapters\u003c\/li\u003e\n\u003cli\u003e20-1459 FPD Adapter 8AN ORB 27mm Bore — 8AN ORB to OEM FPD Adapters\u003c\/li\u003e\n\u003cli\u003e20-0663 8AN ORB to Toyota Pressure Sensor Adapter — 8AN ORB to OEM Sensor Adapters\u003c\/li\u003e\n\u003cli\u003e20-1303 Ford Sensor Adapter 8AN ORB 16mm Bore 41mm Offset Spacing M5 — 8AN ORB to OEM Sensor Adapters\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese anodized billet 6061 aluminum adapter fittings allow an OEM fuel pressure regulator (FPR) or fuel pulse damper (FPD) to be reused in an application other than the OEM fuel rail. All fittings permit the unit to be clocked into the proper position.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0301 FPR Adapter 8AN ORB 11mm Bore 39mm Spacing M6\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0301n_95e4db58-8e4d-46e5-9d87-b834add775b8.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting can adapt to virtually any fuel rail with an 8AN ORB female port and the necessary space around it to allow the FPR to fit. It is threaded M6x1.0mm where is accepts the FPR and has a 39mm hole spacing. Compatible FPR must have an 11mm bore and 39mm mount hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0302 FPR Adapter 8AN ORB 16mm Bore 39mm Spacing M6\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0302n.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting can adapt to virtually any fuel rail with an 8AN ORB female port and the necessary space around it to allow the FPR to fit. It is threaded M6x1.0mm where is accepts the FPR and has a 39mm hole spacing. Compatible FPR must have an 16mm bore and 39mm mount hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0303 FPR Adapter 8AN ORB 11mm Bore 32mm Spacing M5\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0303n.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting can adapt to virtually any fuel rail with an 8AN ORB female port and the necessary space around it to allow the FPR to fit. It is threaded M5x0.8mm where is accepts the FPR and has a 32mm hole spacing. Compatible FPR must have an 11mm bore and 32mm mount hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0595 FPR Adapter 8AN ORB 7mm Bore 39mm Offset M6\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0595.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting can adapt to virtually any fuel rail with an 8AN ORB female port and the necessary space around it to allow the FPR to fit. It is threaded M6x1.0mm where is accepts the FPR and has an offset 39mm hole spacing. Compatible FPR must have an 7mm bore and 39mm mount hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0603 FPR Adapter 8AN ORB 7mm Bore 39mm Spacing M6\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0603.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting can adapt to virtually any fuel rail with an 8AN ORB female port and the necessary space around it to allow the FPR to fit. It is threaded M6x1.0mm where is accepts the FPR and has a 39mm hole spacing. Compatible FPR must have an 7mm bore and 39mm mount hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0842 FPR Adapter 8AN ORB 16mm Bore 50mm Spacing M6\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0842.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting can adapt to virtually any fuel rail with an 8AN ORB female port and the necessary space around it to allow the FPR to fit. It is threaded M6x1.0mm where is accepts the FPR and has a 50mm hole spacing. Compatible FPR must have a 16mm bore and 50mm mount hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e14-0285 8AN ORB to M12x1.25 Female\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/14-0285new.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting is used to adapt any FPR or sensor that is threaded M12x1.25 to an 8AN ORB female port. These metric FPR units should include a sealing washer to use when installing into the fitting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0459 FPD Adapter 8AN ORB 27mm Bore\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0459.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting will adapt OEM pulse dampers commonly used in Nissan applications to an 8AN male thread. This can be installed into any 8AN ORB female port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0460 FPD Adapter 8AN ORB 11mm Bore 42mm Spacing M6\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0460n.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting can adapt to virtually any fuel rail with an 8AN ORB female port and the necessary space around it to allow the FPR to fit. It is threaded M6x1.0mm where is accepts the FPR and has a 42mm hole spacing. Compatible FPR must have an 11mm bore and 42mm mount hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0663 8AN ORB to Toyota Pressure Sensor Adapter\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0663.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eOriginally designed specifically for the 2022+ Toyota Corolla GR, this fitting can adapt to virtually any fuel rail with an 8AN ORB female port. This adapter clamps onto the OEM Toyota pressure sensor used in several Toyota applications with a 9.5mm bore.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1303 Ford Sensor Adapter 8AN ORB 16mm Bore 41mm Offset Spacing M5\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1303.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting can adapt to virtually any fuel rail with an 8AN ORB female port and the necessary space around it to allow the FPR to fit. It is threaded M56x0.8mm where is accepts the FPR and has an offset 41mm hole spacing. Compatible FPR must have a 16mm bore and 41mm mount hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1459 FPD Adapter 8AN ORB 27mm Bore\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0459.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting will adapt OEM pulse dampers commonly used in Nissan applications to an 8AN male thread. This can be installed into any 8AN ORB female port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0301 FPR Adapter 8AN ORB 11mm Bore 39mm Spacing M6","offer_id":67591210565905,"sku":"20-0301","price":34.95,"currency_code":"USD","in_stock":true},{"title":"20-0302 FPR Adapter 8AN ORB 16mm Bore 39mm Spacing M6","offer_id":67591210598673,"sku":"20-0302","price":34.95,"currency_code":"USD","in_stock":true},{"title":"20-0303 FPR Adapter 8AN ORB 11mm Bore 32mm Spacing M5","offer_id":67591210631441,"sku":"20-0303","price":34.95,"currency_code":"USD","in_stock":true},{"title":"20-0595 FPR Adapter 8AN ORB 7mm Bore 39mm Offset M6","offer_id":67591210664209,"sku":"20-0595","price":34.95,"currency_code":"USD","in_stock":true},{"title":"20-0603 FPR Adapter 8AN ORB 7mm Bore 39mm Spacing M6","offer_id":67591210696977,"sku":"20-0603","price":34.95,"currency_code":"USD","in_stock":true},{"title":"20-0842 FPR Adapter 8AN ORB 16mm Bore 50mm Spacing M6","offer_id":67591210729745,"sku":"20-0842","price":34.95,"currency_code":"USD","in_stock":true},{"title":"14-0285 FPR Adapter 8AN ORB to M12x1.25 Female","offer_id":67591210762513,"sku":"14-0285","price":14.95,"currency_code":"USD","in_stock":true},{"title":"20-0459 FPD Adapter 8AN ORB 27mm Bore","offer_id":67591210795281,"sku":"20-0459","price":29.95,"currency_code":"USD","in_stock":true},{"title":"20-0460 FPD Adapter 8AN ORB 11mm Bore 42mm Spacing M6","offer_id":67591210828049,"sku":"20-0460","price":34.95,"currency_code":"USD","in_stock":true},{"title":"20-1459 FPD Adapter 8AN ORB 27mm Bore","offer_id":67591210860817,"sku":"20-1459","price":29.95,"currency_code":"USD","in_stock":true},{"title":"20-0663 8AN ORB to Toyota Pressure Sensor Adapter","offer_id":67591210893585,"sku":"20-0663","price":29.95,"currency_code":"USD","in_stock":true},{"title":"20-1303 Ford Sensor Adapter 8AN ORB 16mm Bore 41mm Offset Spacing M5","offer_id":67591210926353,"sku":"20-1303","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0301n_95e4db58-8e4d-46e5-9d87-b834add775b8.jpg?v=1790637912"},{"product_id":"radium-radiator-caps","title":"Radium Radiator Caps — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e18-0076-A11 Radiator Cap Type-A 1.1Bar Black\u003c\/li\u003e\n\u003cli\u003e18-0076-A13 Radiator Cap Type-A 1.3Bar Black\u003c\/li\u003e\n\u003cli\u003e18-0076-A15 Radiator Cap Type-A 1.5Bar Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe radiator cap is an essential part of an upgraded cooling system. Radium caps are engineered to safely improve cooling efficiency by managing the boiling temperature. A higher radiator pressure effectively raises the coolant boiling point, providing an extra safety margin and preventing air pocket cavitation at the water pump.\u003c\/p\u003e\n\u003cp\u003eEach OEM replacement radiator cap is manufactured from stamped stainless steel for durability. All 18-0076-X1X radiator caps are electroplated black. Unlike OEM caps which use natural rubber gaskets, these radiator caps feature premium silicone sealing elements for long lasting durability.\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePRESSURE\u003c\/h3\u003e\n\u003cp\u003eAvailable with 3 different pressure relief springs:\u003c\/p\u003e\n\u003cp\u003e1.1Bar (16.0psi)\u003cbr\u003e1.3Bar (18.9psi)\u003cbr\u003e1.5Bar (21.8psi)\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCAP TYPES\u003c\/h3\u003e\n\u003cp\u003eRadium radiator caps are designed for mini size (32mm ID) radiator necks only. Available in Type-A. We no longer offer Type-B.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease confirm what style your application uses prior to ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNOTE: All Radium Engineering coolant expansion tanks require a Type-A style radiator cap.\u003c\/em\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"18-0076-A11 Radiator Cap Type-A 1.1Bar Black","offer_id":67591210959121,"sku":"18-0076-A11","price":29.95,"currency_code":"USD","in_stock":true},{"title":"18-0076-A13 Radiator Cap Type-A 1.3Bar Black","offer_id":67591210991889,"sku":"18-0076-A13","price":29.95,"currency_code":"USD","in_stock":true},{"title":"18-0076-A15 Radiator Cap Type-A 1.5Bar Black","offer_id":67591211024657,"sku":"18-0076-A15","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/Radiator_Caps-A.jpg?v=1790637913"},{"product_id":"radium-v2-quick-connect-fittings-and-hose-ends","title":"Radium V2 Quick Connect Fittings and Hose Ends — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e14-0963 V2 Quick Connect, 12mm Female to 8AN ORB Male — 12mm V2 Fittings\u003c\/li\u003e\n\u003cli\u003e14-0763 V2 Quick Connect 15mm Female to 10AN Male Straight — 15mm V2 Fittings\u003c\/li\u003e\n\u003cli\u003e14-0768 V2 Quick Connect 15mm Male to 90deg 5\/8in Barb — 15mm V2 Fittings\u003c\/li\u003e\n\u003cli\u003e20-0858 V2 Quick Connect 15mm Male to 10AN Male Straight — 15mm V2 Fittings\u003c\/li\u003e\n\u003cli\u003e20-0748 V2 Quick Connect 19mm Male to 10AN Male 90deg — 15mm V2 Fittings\u003c\/li\u003e\n\u003cli\u003e14-0363 V2 Quick Connect 19mm Female to 10AN Male Straight — 19mm V2 Fittings\u003c\/li\u003e\n\u003cli\u003e14-0668 V2 Quick Connect 19mm Male to 90deg 3\/4in Barb — 19mm V2 Fittings\u003c\/li\u003e\n\u003cli\u003e20-0758 V2 Quick Connect 19mm Male to 10AN Male Straight — 19mm V2 Fittings\u003c\/li\u003e\n\u003cli\u003e20-1748 V2 Quick Connect 19mm Male to 16mm SAE Male 90deg — 19mm V2 Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese fittings may fit more applications than what is listed. The listed fitments are the only ones that are verified. Use the measurement information below to help determine if there are other compatible fitments.\u003c\/p\u003e\n\u003cp\u003eV2 Quick Connect fittings are found on many OEM vehicles including BMW, VW, Audi, Lamborghini, Ford, Porsche, SEAT, Mercedes, etc.\u003cbr\u003e\u003cbr\u003eThese Radium Engineering fittings are used with many crankcase ventilation and turbo inlet connectors. They are primarily used for air\/oil separation catch cans.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eMEASUREMENT\u003c\/h3\u003e\n\u003cp\u003eThe sizing of the fitting is given based on the ID of the hose connected to it, not the actual fitting itself. The ID and OD of the fitting will measure more than the size listed on the fitting.\u003c\/p\u003e\n\u003cp\u003eNo exact measurement from the actual fitting determines the size (in millimeters). The dimensions of the fitting may actually be much larger. Shown below is a male 19mm V2 quick connect fitting.\u003c\/p\u003e\n\u003chr\u003e\n\n\u003cdiv class=\"spec-box3\"\u003e\n\u003cdiv style=\"min-width: 300px; float: left;\"\u003e\n\u003ch4\u003e14-0363 V2 QUICK CONNECT, 19MM FEMALE 10AN MALE STRAIGHT\u003c\/h4\u003e\n\u003cp\u003eThis fitting adapts the male side of a 19mm V2 quick connect to 10AN male. These adapters may be compatible with other unknown engines not listed. Machined from 6061 billet aluminum. For corrosion protection, they are anodized type-II.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"float: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/4193\/7449\/files\/14-0363.jpg\" id=\"myImg\" class=\"myImages\" style=\"width: 150px;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"spec-box3\"\u003e\n\u003cdiv style=\"min-width: 300px; float: left;\"\u003e\n\u003ch4\u003e14-0668 V2 QUICK CONNECT, 19MM MALE TO 90DEG 3\/4IN BARB\u003c\/h4\u003e\n\u003cp\u003eThis is a 19mm V2 quick connect male hose end that connects to a 19mm female V2 quick connect. These adapters may be compatible with other unknown engines not listed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"float: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/4193\/7449\/files\/14-0668.jpg\" id=\"myImg\" class=\"myImages\" style=\"width: 150px;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"spec-box3\"\u003e\n\u003cdiv style=\"min-width: 300px; float: left;\"\u003e\n\u003ch4\u003e14-0763 V2 QUICK CONNECT, 15MM FEMALE 10AN MALE STRAIGHT\u003c\/h4\u003e\n\u003cp\u003eThis fitting adapts the male side of a 15mm V2 quick connect to 10AN male. These adapters may be compatible with other unknown engines not listed. Machined from 6061 billet aluminum. For corrosion protection, they are anodized type-II.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"float: right;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/14-0763.jpg\" id=\"myImg\" class=\"myImages\" style=\"width: 150px;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"spec-box3\"\u003e\n\u003cdiv style=\"min-width: 300px; float: left;\"\u003e\n\u003ch4\u003e14-0768 V2 QUICK CONNECT, 15MM MALE TO 90DEG 5\/8IN BARB\u003c\/h4\u003e\n\u003cp\u003eThis is a 15mm V2 quick connect male hose end that connects to a 15mm female V2 quick connect. These adapters may be compatible with other unknown engines not listed.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"float: right;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/14-0768.jpg\" id=\"myImg\" class=\"myImages\" style=\"width: 150px;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\n  \u003cdiv class=\"spec-box3\"\u003e\n\u003cdiv style=\"min-width: 300px; float: left;\"\u003e\n\u003ch4\u003e14-0963 V2 QUICK CONNECT, 12MM FEMALE TO 8AN ORB\u003c\/h4\u003e\n\u003cp\u003eThis fitting adapts the male side of a 12mm V2 quick connect to 8AN ORB male. These adapters may be compatible with other unknown engines not listed. Machined from 6061 billet aluminum. For corrosion protection, they are anodized type-II.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"float: right;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/14-0963_1200px_wide.jpg\" id=\"myImg\" class=\"myImages\" style=\"width: 150px;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n  \n\u003cdiv class=\"spec-box3\"\u003e\n\u003cdiv style=\"min-width: 300px; float: left;\"\u003e\n\u003ch4\u003e20-0748 V2 QUICK CONNECT, 19MM MALE TO 10AN MALE 90DEG\u003c\/h4\u003e\n\u003cp\u003eThis adapts a 19mm V2 quick connect female to a swiveling 90 degree 10AN male fitting. As shown below, it secures directly to the following valve covers: Audi S6, S8, R8 as well as Lamborghini Gallardo. It is also compatible with the BMW Z4 and Toyota MK5 Supra.\u003c\/p\u003e\n\u003cp\u003eBecause it is 90 degree, it is perfect for 2nd generation BMW B58TU valve covers which have a vertical port, as shown above. Internal O-rings permit swiveling even after installation.\u003c\/p\u003e\n\u003cp\u003eThese adapters may be compatible with other unknown engines not listed. Stainless steel bolts are provided for securing the green retainer. Machined from 6061 billet aluminum. For corrosion protection, they are anodized type-II. \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"float: right;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0748.jpg\" id=\"myImg\" class=\"myImages\" style=\"width: 150px;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n  \n\u003cdiv class=\"spec-box3\"\u003e\n\u003cdiv style=\"min-width: 300px; float: left;\"\u003e\n\u003ch4\u003e20-0758 V2 QUICK CONNECT, 19MM MALE TO 10AN MALE STRAIGHT\u003c\/h4\u003e\n\u003cp\u003eThis adapts a 19mm V2 quick connect male to a 10AN male fitting. It also secures directly to many BMW valve covers.  Because it is straight, it is perfect for 1st generation BMW B58B30M0 (B58B30A) valve covers that have a horizontal port.\u003c\/p\u003e\n\u003cp\u003eStainless steel bolts are provided for securing the green retainer. Machined from 6061 billet aluminum. For corrosion protection, they are anodized type-II. These adapters may be compatible with other unknown engines not listed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"float: right;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0758n.jpg\" id=\"myImg\" class=\"myImages\" style=\"width: 150px;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n  \n\u003cdiv class=\"spec-box3\"\u003e\n\u003cdiv style=\"min-width: 300px; float: left;\"\u003e\n\u003ch4\u003e20-0858 V2 QUICK CONNECT, 15MM MALE TO 10AN MALE STRAIGHT\u003c\/h4\u003e\n\u003cp\u003eThis adapts a 15mm V2 quick connect male to a 10AN male fitting. Machined from 6061 billet aluminum. For corrosion protection, they are anodized type-II. Stainless steel bolts are provided for securing the black retainer. These adapters may be compatible with other unknown engines not listed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"float: right;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0858.jpg\" id=\"myImg\" class=\"myImages\" style=\"width: 150px;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n  \n\u003cdiv class=\"spec-box3\"\u003e\n\u003cdiv style=\"min-width: 300px; float: left;\"\u003e\n\u003ch4\u003e20-1748 V2 QUICK CONNECT, 19MM MALE TO 16MM SALE 90DEG\u003c\/h4\u003e\n\u003cp\u003eThis adapts a 19mm V2 quick connect female to a swiveling 90 degree 16mm male fitting.\u003cbr\u003eIt is also compatible with the BMW Z4 and Toyota MK5 Supra. Because it is 90 degree, it is perfect for 2nd generation BMW B58TU valve covers which have a vertical port. Internal O-rings permit swiveling even after installation.\u003c\/p\u003e\n\u003cp\u003eMachined from 6061 billet aluminum. For corrosion protection, they are anodized type-II. Stainless steel bolts are provided for securing the green retainer. These adapters may be compatible with other unknown engines not listed.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"float: right;\"\u003e\n\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1748.jpg\" id=\"myImg\" class=\"myImages\" style=\"width: 150px;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"14-0963 V2 Quick Connect, 12mm Female to 8AN ORB Male","offer_id":67591221936401,"sku":"14-0963","price":14.95,"currency_code":"USD","in_stock":true},{"title":"14-0763 V2 Quick Connect 15mm Female to 10AN Male Straight","offer_id":67591221969169,"sku":"14-0763","price":19.95,"currency_code":"USD","in_stock":true},{"title":"14-0768 V2 Quick Connect 15mm Male to 90deg 5\/8in Barb","offer_id":67591222001937,"sku":"14-0768","price":19.95,"currency_code":"USD","in_stock":true},{"title":"20-0858 V2 Quick Connect 15mm Male to 10AN Male Straight","offer_id":67591222034705,"sku":"20-0858","price":39.95,"currency_code":"USD","in_stock":true},{"title":"20-0748 V2 Quick Connect 19mm Male to 10AN Male 90deg","offer_id":67591222067473,"sku":"20-0748","price":59.95,"currency_code":"USD","in_stock":true},{"title":"14-0363 V2 Quick Connect 19mm Female to 10AN Male Straight","offer_id":67591222100241,"sku":"14-0363","price":19.95,"currency_code":"USD","in_stock":true},{"title":"14-0668 V2 Quick Connect 19mm Male to 90deg 3\/4in Barb","offer_id":67591222133009,"sku":"14-0668","price":19.95,"currency_code":"USD","in_stock":true},{"title":"20-0758 V2 Quick Connect 19mm Male to 10AN Male Straight","offer_id":67591222165777,"sku":"20-0758","price":39.95,"currency_code":"USD","in_stock":true},{"title":"20-1748 V2 Quick Connect 19mm Male to 16mm SAE Male 90deg","offer_id":67591222198545,"sku":"20-1748","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/V2_Connect_Fitting_Compilation.jpg?v=1790638052"},{"product_id":"radium-air-oil-separator-return-aos-r-kit-fr-s-brz-gt86","title":"Radium Air Oil Separator-Return (AOS-R) Kit, FR-S\/BRZ\/GT86","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0351 Air Oil Separator-Return (AOS-R) Kit FR-S\/BRZ\/GT86\/GR86\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eHigh-powered modified Toyota 4U-GSE and Subaru FA engines tend to generate excessive blow-by oil and gasses. In these cases, an ordinary small catch can may quickly fill with oil and not be adequate. Like the Radium Engineering, the AOS-R (Air Oil Separator-Return) kit is responsible for keeping blow-by oil and other pollutants out of the intake pipe, manifold, turbocharger, and intercooler during all engine loads. The main difference is that an AOS-R system returns what is collected back into the oil pan (as shown below) so there is no servicing required. The AOS-R is constructed of three CNC machined sections that screw together and are sealed with O-rings.\u003c\/p\u003e\n\u003cp\u003eThe built-in heater keeps water from condensing in the AOS-R. And because water is more dense than oil, there is an integrated water trap found around the bottom perimeter of the can. This prevents water from descending into the oil pan if ever present. Furthermore, because the water is trapped against the heater, it will eventually boil and evaporate out of the system.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eBENEFITS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEffectively raises the octane and increases engine performance with cleaner inlet air.\u003c\/li\u003e\n\u003cli\u003ePrevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc.\u003c\/li\u003e\n\u003cli\u003eLowers hydrocarbon emissions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"20-0351 Air Oil Separator-Return (AOS-R) Kit FR-S\/BRZ\/GT86\/GR86","offer_id":67591223116049,"sku":"20-0351","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0351updated.jpg?v=1790638065"},{"product_id":"radium-catch-can-kits-fr-s-brz-gt86","title":"Radium Catch Can Kits, FR-S\/BRZ\/GT86","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0901-FL PCV Catch Can Kit, FR-S\/BRZ\/GT86\u003c\/li\u003e\n\u003cli\u003e20-0902-FL CCV Catch Can Kit, FR-S\/BRZ\/GT86\/GR86\u003c\/li\u003e\n\u003cli\u003e20-0903-FL Dual Catch Can Kit, FR-S\/BRZ\/GT86\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe catch can draws out oil and water condensation from the crankcase gasses that would otherwise be drawn into the intake manifold. This prevents oil buildup in the intake, intercooler system walls, throttle body, and intake manifold. This effectively raises the octane, can increase engine performance from cleaner inlet air, and can lower hydrocarbon emissions. The closed system prevents unwanted oil vapors from entering into the cabin. Catch can kits include everything needed for a complete installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFLUID LOCK® CATCH CANS\u003c\/h3\u003e\n\u003cp\u003eIn 2022, Radium Engineering implemented a revolutionary design change to the 7 fluid ounce standard catch can. An inherent problem always existed with typical catch cans when not serviced regularly. The fluid contaminants will eventually leave the reservoir pouring into the air intake system causing poor engine performance. To resolve this issue, Radium created the Fluid Lock® Catch Can. This contains a patented mechanism that prevents the reservoir from overfilling and traps the collected fluids until it is emptied.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/4193\/7449\/files\/FL3_a_Internals_480x480.jpg\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCOLLECTION \u0026amp; EMPTYING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe rate that your catch cans will collect oil and moisture contaminants will vary from one individual vehicle to the next, so there is no set emptying interval. PCV catch cans tend to collect more than CCV catch cans. You should check the level of your catch can using the integrated dipstick starting at 3-4 weeks of driving and repeat as needed to determine how often they should be emptied based on what you see.\u003c\/p\u003e\n\u003cp\u003eCatch cans can be emptied by unscrewing the lower reservoir and removing it from the vehicle to dump out, or in cases where there is available space under the catch can, the \u003ca href=\"https:\/\/www.radiumauto.com\/products\/catch-can-petcock-drain-kit\"\u003ePetcock Drain Kit\u003c\/a\u003ecan be installed and used to drain them.\u003c\/p\u003e\n\u003cp\u003eIn cases where oil collection is excessive you may have to address an issue with the engine. The reasons a catch can will collect an excess of oil include\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcessive blowby from engine damage\u003c\/li\u003e\n\u003cli\u003eCrankcase windage from an over-full oil level\u003c\/li\u003e\n\u003cli\u003ePoor placement of breather ports and\/or poor baffling inside breather ports\u003c\/li\u003e\n\u003cli\u003ePCV valve not closing and leaking under heavy load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eINDEPENDENT INSTALLATION VIDEO\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/v4pEDdQaYAQ?si=9MRpFMumNO_iOckj\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0901-FL Catch Can Kit PCV FR-S\/BRZ\/GT86\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0901-FL.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe PCV kit mounts on the RH side of the engine bay. This catch can runs inline with the 3\/8\" PCV (positive crankcase ventilation) valve. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV valve closes and this hose experiences no flow. The PCV hose will experience metered vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNOTE: Because the Radium Engineering catch cans are pressure sealed, they are great for boosted applications as well. Connecting to the intake manifold is permitted.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0902-FL Catch Can Kit CCV FR-S\/BRZ\/GT86\/GR86\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0902-FL.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe 20-0902-FL CCV kit mounts on the LH side of the engine bay. This catch can runs inline with the 1\/2\" breather port. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience vacuum and would normally be drawing unwanted crankcase vapors, unspent fuel, and oil sludge into the air filter intake pipe. If the engine is turbocharged or supercharged and you are finding oil accumulation stuck in the intercooler, this catch can is a necessity as oil will lower the thermal efficiency properties of the heat exchange process.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0903-FL Dual Catch Can Kit FR-S\/BRZ\/GT86\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0903-FL.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eFor the ultimate in engine protection, Radium Engineering recommends the 20-0903-FL Dual Catch Can Kit. This kit utilizes both the CCV and PCV catch can kits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0901-FL PCV Catch Can Kit, FR-S\/BRZ\/GT86","offer_id":67591223181585,"sku":"20-0901-FL","price":229.95,"currency_code":"USD","in_stock":true},{"title":"20-0902-FL CCV Catch Can Kit, FR-S\/BRZ\/GT86\/GR86","offer_id":67591223214353,"sku":"20-0902-FL","price":229.95,"currency_code":"USD","in_stock":true},{"title":"20-0903-FL Dual Catch Can Kit, FR-S\/BRZ\/GT86","offer_id":67591223247121,"sku":"20-0903-FL","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0903-FL.jpg?v=1790638066"},{"product_id":"radium-di-ecu-mount-kit-fr-s-brz-86","title":"Radium DI ECU Mount Kit, FR-S\/BRZ\/86","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0352 DI ECU Mount Kit FR-S\/BRZ\/86\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis aluminum direct injection ECU bracket replaces the heavy MIG welded steel mount. It permits easier access to the RH side of the engine complimenting components such as the \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-rails-fr-s-brz-gt86-gr86\"\u003eRadium Fuel Rail Kit\u003c\/a\u003e. Laser cut and formed from 5052 aluminum and black anodized.\u003c\/p\u003e\n","brand":"Radium Engineering","offers":[{"title":"20-0352 DI ECU Mount Kit FR-S\/BRZ\/86","offer_id":67591223312657,"sku":"20-0352","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0352n.jpg?v=1790638068"},{"product_id":"radium-flange-for-denso-maf-sensor","title":"Radium Flange for Denso MAF Sensor","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e11-0001 Flange for Denso MAF Sensor\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eWeld-on CNC machined mass air flow flange for a Denso air meter. Perfect for those designing their own custom inlet pipes. Machined radius is designed to be used with a 2.75\" outside diameter aluminum pipe. However, this flange can be easily modified to work with 2.5-3.0\" pipes.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"11-0001 Flange for Denso MAF Sensor","offer_id":67591223410961,"sku":"11-0001","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/11-0001n.jpg?v=1790638074"},{"product_id":"radium-fuel-delivery-system-fr-s-brz-gt86-gr86","title":"Radium Fuel Delivery System, FR-S\/BRZ\/GT86\/GR86 — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0111-02 Fuel Rails FR-S\/BRZ\/GT86\/GR86 — Required Items\u003c\/li\u003e\n\u003cli\u003e20-0111-PK Fuel Rail Plumbing Kit FR-S\/BRZ\/GT86\/GR86 — Required Items\u003c\/li\u003e\n\u003cli\u003e20-0352 DI ECU Mount Kit FR-S\/BRZ\/86 — Required Items\u003c\/li\u003e\n\u003cli\u003e20-1073 Fuel Hanger 12-21 FR-S\/BRZ\/GT86 — Choose Pump Hanger\u003c\/li\u003e\n\u003cli\u003e20-1074 Fuel Hanger 2022+ GR86\/BRZ — Choose Pump Hanger\u003c\/li\u003e\n\u003cli\u003e20-0966-05 Fuel Hanger Plumbing Kit FR-S\/BRZ\/GT86\/GR86 Microglass Filter — Choose Plumbing Kit (Filter Type)\u003c\/li\u003e\n\u003cli\u003e20-0966-03 Fuel Hanger Plumbing Kit FR-S\/BRZ\/GT86\/GR86 Stainless Filter — Choose Plumbing Kit (Filter Type)\u003c\/li\u003e\n\u003cli\u003eWalbro F90000274 — Choose Pumps\u003c\/li\u003e\n\u003cli\u003e17-0031 DIY Fuel Pump Wiring Kit — DIY Wiring Kits (1 per pump)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis comprehensive kit includes all the Radium Engineering components required to construct a high performance fuel delivery system.\u003c\/p\u003e\n\u003cp\u003eThe in-tank fuel hanger surge tank replaces the factory unit and can be configured with a variety of different fuel pump options. More details on the 20-1073 and 20-1074 fuel hanger can be found\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pump-Hanger-FR-S-BRZ-GT86-GR86\"\u003eHERE\u003c\/a\u003e. NOTE: Fuel Pump(s) are required.\u003cbr\u003e\u003cbr\u003eThe fuel lines, a high flow fuel filter, 1:1 multi-port regulator, fuel pressure gauge, and AN fittings replace all OEM components. More details on the 20-0966-03 and 20-0966-05 fuel hanger plumbing kits can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pump-Hanger-FR-S-BRZ-GT86-GR86\"\u003eHERE\u003c\/a\u003e. \u003cbr\u003e\u003cbr\u003eMore details on the 20-0111-02 fuel rails can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Rails-FR-S-BRZ-GT86-GR86\"\u003eHERE\u003c\/a\u003e. NOTE: Fuel Injectors are required.\u003cbr\u003e\u003cbr\u003eMore details on the 20-0111-PK fuel rail plumbing kit can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Rails-FR-S-BRZ-GT86-GR86\"\u003eHERE\u003c\/a\u003e. NOTE: The provided feed hose and clamp will simply NOT be used.\u003cbr\u003e\u003cbr\u003eFor 12-21 models, the direct injection ECU mount makes fuel rail plumbing installation simple. It prevents the need to modify the heavy gauge steel fuel rail shields. This DI ECU Mount is not compatible or even needed for 2022+ models. More details on the 20-0352 DI ECU mount can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/di-ecu-mount-kit-fr-s-brz-86\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eHOW TO ORDER\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eTo order this kit from a dealer or distributor, copy all of the part numbers listed to the right and use this as a parts list to order. Each part will have to be ordered individually. To order directly from Radium, follow these guidelines:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRequired items are preselected. If you already have any of the parts with check boxes next to them, you can uncheck them to remove them from the package\u003c\/li\u003e\n\u003cli\u003eSelect a fuel pump hanger that matches the part number of the fuel pump(s) you wish to install into it.\u003c\/li\u003e\n\u003cli\u003eSelect the fuel hanger plumbing kit by filter type. Stainless are 10 micron and Microglass are a finer 6 micron filtration. Stainless filters have elements that can be cleaned and reused.\u003c\/li\u003e\n\u003cli\u003eChoose your fuel pumps, make sure that they match the hanger selected earlier. If using a pump not available from Radium, choose none to receive no pumps. Pumps will NOT come preinstalled into the hanger: assembly is required.\u003c\/li\u003e\n\u003cli\u003eDIY fuel pump wiring kits are preselected. If you do not need both wiring kits, deselect the ones you do not want.\u003c\/li\u003e\n\u003cli\u003eAfter all selections are made double check them for accuracy and add item to cart and proceed to checkout.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"20-0111-02 Fuel Rails FR-S\/BRZ\/GT86\/GR86","offer_id":67591223673105,"sku":"20-0111-02","price":179.95,"currency_code":"USD","in_stock":true},{"title":"20-0111-PK Fuel Rail Plumbing Kit FR-S\/BRZ\/GT86\/GR86","offer_id":67591223705873,"sku":"20-0111-PK","price":119.95,"currency_code":"USD","in_stock":true},{"title":"20-0352 DI ECU Mount Kit FR-S\/BRZ\/86","offer_id":67591223738641,"sku":"20-0352","price":49.95,"currency_code":"USD","in_stock":true},{"title":"20-1073 Fuel Hanger 12-21 FR-S\/BRZ\/GT86","offer_id":67591223771409,"sku":"20-1073","price":529.95,"currency_code":"USD","in_stock":true},{"title":"20-1074 Fuel Hanger 2022+ GR86\/BRZ","offer_id":67591223804177,"sku":"20-1074","price":529.95,"currency_code":"USD","in_stock":true},{"title":"20-0966-05 Fuel Hanger Plumbing Kit FR-S\/BRZ\/GT86\/GR86 Microglass Filter","offer_id":67591223836945,"sku":"20-0966-05","price":659.95,"currency_code":"USD","in_stock":true},{"title":"20-0966-03 Fuel Hanger Plumbing Kit FR-S\/BRZ\/GT86\/GR86 Stainless Filter","offer_id":67591223869713,"sku":"20-0966-03","price":679.95,"currency_code":"USD","in_stock":true},{"title":"Walbro F90000274","offer_id":67591223902481,"sku":"WALB F90000274","price":124.95,"currency_code":"USD","in_stock":true},{"title":"17-0031 DIY Fuel Pump Wiring Kit","offer_id":67591223935249,"sku":"17-0031","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/FRZ_Fuel_Delivery_Kit.jpg?v=1790638076"},{"product_id":"radium-fuel-filter-mount-fr-s-brz-gt86-gr86","title":"Radium Fuel Filter Mount, FR-S\/BRZ\/GT86\/GR86 — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0912 Fuel Filter Mount FR-S\/BRZ\/GT86\/GR86 — Selection\u003c\/li\u003e\n\u003cli\u003e20-0220-03 Fuel Filter, 10AN ORB Ports, Stainless, 10 Micron — Select Filter\u003c\/li\u003e\n\u003cli\u003e20-0220-05 Fuel Filter, 10AN ORB Ports, Microglass, 6 Micron — Select Filter\u003c\/li\u003e\n\u003cli\u003e20-1220-05 Fuel Filter, 10AN ORB Ports, Check Valve, Microglass, 6 Micron — Select Filter\u003c\/li\u003e\n\u003cli\u003e20-1220-03 Fuel Filter, 10AN ORB Ports, Check Valve, Stainless, 10 Micron — Select Filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHardware for installing a Radium Engineering fuel filter. The sheet metal bracket conforms to the chassis hitting 3 different OEM mounting points underneath the vehicle. The heat exchanger mounts directly to the sheet metal bracket where it receives cool air flow. The fuel filter secures inside the heat exchanger.\u003c\/p\u003e\n\u003cp\u003eThe mounting location is just left of the transmission bell housing. The picture shows the \u003ca href=\"https:\/\/www.radiumauto.com\/products\/high-flow-fuel-filters\"\u003eFuel Filter\u003c\/a\u003e and \u003ca href=\"https:\/\/www.radiumauto.com\/products\/10an-orb-fittings\"\u003e10AN ORB Fittings\u003c\/a\u003e (both sold separately).\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0912 Fuel Filter Mount FR-S\/BRZ\/GT86\/GR86","offer_id":67591224262929,"sku":"20-0912","price":89.95,"currency_code":"USD","in_stock":true},{"title":"20-0220-03 Fuel Filter, 10AN ORB Ports, Stainless, 10 Micron","offer_id":67591224295697,"sku":"20-0220-03","price":144.95,"currency_code":"USD","in_stock":true},{"title":"20-0220-05 Fuel Filter, 10AN ORB Ports, Microglass, 6 Micron","offer_id":67591224328465,"sku":"20-0220-05","price":124.95,"currency_code":"USD","in_stock":true},{"title":"20-1220-05 Fuel Filter, 10AN ORB Ports, Check Valve, Microglass, 6 Micron","offer_id":67591224361233,"sku":"20-1220-05","price":149.95,"currency_code":"USD","in_stock":true},{"title":"20-1220-03 Fuel Filter, 10AN ORB Ports, Check Valve, Stainless, 10 Micron","offer_id":67591224394001,"sku":"20-1220-03","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0912.jpg?v=1790638079"},{"product_id":"radium-fuel-level-sender-adapter-denso","title":"Radium Fuel Level Sender Adapter, Denso","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0350 Fuel Level Sender Adapter Denso\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis kit is designed for adapting a specific Denso fuel level sender (not included) to a flat surface.\u003c\/p\u003e\n\u003cp\u003eWill work in other vehicles. Reference the physical fuel level sender first to verify. Scion FR-S sensor shown below.\u003c\/p\u003e\n\u003cp\u003eTo install, simply place the Denso fuel level sender onto the adapter and slide downwards until the tab locks into place. There are multiple integrated holes permitting different float heights. Included are two M5x0.8x12mm stainless steel bolts. Mitsubishi EVO X shown below.\u003c\/p\u003e\n\u003cp\u003eThe adapter is made from 6061 aluminum and anodized black. There is also a provision to secure an OEM fuel temperature sensor (shown below).\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n","brand":"Radium Engineering","offers":[{"title":"20-0350 Fuel Level Sender Adapter Denso","offer_id":67591224590609,"sku":"20-0350","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/Denso_Adapter-2.jpg?v=1790638080"},{"product_id":"radium-fuel-pump-hanger-fr-s-brz-gt86-gr86","title":"Radium Fuel Pump Hanger, FR-S\/BRZ\/GT86\/GR86 — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-1073 Fuel Hanger 12-21 FR-S\/BRZ\/GT86 — Select Hanger\u003c\/li\u003e\n\u003cli\u003e20-1074 Fuel Hanger 2022+ GR86\/BRZ — Select Hanger\u003c\/li\u003e\n\u003cli\u003e20-0966-05 Fuel Hanger Plumbing Kit FR-S\/BRZ\/GT86\/GR86 Microglass Filter — Select Plumbing Kit\u003c\/li\u003e\n\u003cli\u003e20-0966-03 Fuel Hanger Plumbing Kit FR-S\/BRZ\/GT86\/GR86 Stainless Filter — Select Plumbing Kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1073 \u0026amp; 20-1074 Fuel Pump Hangers\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1073.jpg\" style=\"width: 200px;\" class=\"myImages\" id=\"myImg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe new Radium Engineering fuel pump hanger has been redesigned for improved fuel collection and for ease of installation. It completely replaces the factory in-tank fuel pump module and allows 1 or 2 aftermarket fuel pumps to be used. The OEM level sender is retained in order to maintain factory functionality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePREVENTING FUEL STARVATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit includes a 1-piece anodized aluminum collector box that makes installation a breeze and keeps fuel trapped around the pump inlet(s). There is a 355 LPH 1-way fill valve incorporated in the bottom of the collector that allows fuel in, but not out. The collector box is constantly replenished with fuel returning from the pressure regulator.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePORTS AND FITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe pump-out port is tapped with 3\/4\"-16 (8AN ORB) threads.\u003c\/li\u003e\n\u003cli\u003eThe return-in port is tapped with 9\/16\"-18 (6AN ORB) threads.\u003c\/li\u003e\n\u003cli\u003eThe provided outlet fitting is an 8AN ORB to 8AN Male\u003c\/li\u003e\n\u003cli\u003eThe provided return fitting is an 6AN ORB to 6AN Male\u003c\/li\u003e\n\u003cli\u003eAdditional 8AN ORB adapters fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\"\u003eHERE\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eAdditional 6AN ORB adapters fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/6an-orb-fittings\"\u003eHERE\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVENTURI JET PUMP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe OEM venturi jet pump in the return line creates a restriction that can impact fuel pressure reliability.\u003c\/li\u003e\n\u003cli\u003eRadium Engineering has redesigned the siphon system to eliminate this restriction but still effectively scavenge fuel. This means higher flowing pumps can safely be used without fuel pressure issues.\u003c\/li\u003e\n\u003cli\u003eDepending on fuel pressure, the venturi jet pump will consume 15-45 LPH. Take this fuel loss into consideration when sizing the fuel pumps.\u003c\/li\u003e\n\u003cli\u003eIf it is important for fuel pressure to hold steady after the engine is shut down, a check valve is required. NOTE: The 20-0966-0X fuel hanger plumbing kits below come standard with a built-in check valve filter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0966-03 \u0026amp; 20-0966-05 Fuel Hanger Plumbing Kits, FR-S\/BRZ\/GT86\/GR86\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0966-0X.jpg\" style=\"width: 200px;\" class=\"myImages\" id=\"myImg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe fuel hanger plumbing kits convert the OEM returnless system to a traditional return system. They include everything required to connect directly to the OEM or aftermarket fuel rails for both single and dual pump configurations. A 8AN PTFE hose attaches to a Radium Engineering fuel filter that mounts underneath the vehicle using a chassis-specific bolt-on bracket.\u003c\/p\u003e\n\u003cp\u003eThe fuel filter features an integrated check valve. An inline fuel pressure gauge secures to the filter and an adjustable Radium RA-Series FPR. This regulator features the first tool-less pressure adjustment. A jam nut and set screw are no longer required. With a simple turn of the knob, pressure will be increased or decreased.\u003c\/p\u003e\n\u003cp\u003e6AN PTFE hoses are included to connect to the port injection fuel rails and the high pressure fuel pump.\u003cbr\u003e\u003cbr\u003eThis kit is suitable with all gasoline types including unleaded, leaded, oxygenated, and pre-mixes. Furthermore, they are compatible with alcohol blends of fuel including methanol, ethanol, and E85.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFUEL PRESSURE REGULATOR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo aid in adjusting pressure, there are incremental detents that provide haptic feedback to the user. Every detent permits 1psi (+\/-0.5psi) of adjustment depending on current fuel pressure. Furthermore, RA-series regulators feature a 360 degree swiveling vacuum reference port that is double O-ring sealed. This is the first in the industry. It permits the installer to quickly point the vacuum fitting in any direction with no tools required.\u003c\/p\u003e\n\u003cp\u003eThere are 4 interchangeable 10-32 threaded vacuum port fittings provided to cover all scenarios.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBarbed Fitting: A black zinc-plated 3\/16\" (5mm) barb machined from high strength steel that is compatible with the following vacuum hoses: 5\/32\" (4mm), 3\/16\" (5mm), and 7\/32\" (6mm).\u003c\/li\u003e\n\u003cli\u003e3AN Male Fitting: A black zinc-plated adapter machined from high strength steel that is compatible with 3AN hose ends.\u003c\/li\u003e\n\u003cli\u003ePush-To-Connect: A nickel-plated brass fitting with Buna-N O-rings that is compatible with hard plastic 1\/4\" OD tubing.\u003c\/li\u003e\n\u003cli\u003eVacuum Plug: A black oxide stainless steel screw that is used to maintain a constant (non dynamic) fuel pressure. To keep fuel pressure the same as the OEM fuel system, this plug should be used.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-1073 Fuel Hanger 12-21 FR-S\/BRZ\/GT86","offer_id":67591225737489,"sku":"20-1073","price":529.95,"currency_code":"USD","in_stock":true},{"title":"20-1074 Fuel Hanger 2022+ GR86\/BRZ","offer_id":67591225770257,"sku":"20-1074","price":529.95,"currency_code":"USD","in_stock":true},{"title":"20-0966-05 Fuel Hanger Plumbing Kit FR-S\/BRZ\/GT86\/GR86 Microglass Filter","offer_id":67591225803025,"sku":"20-0966-05","price":659.95,"currency_code":"USD","in_stock":true},{"title":"20-0966-03 Fuel Hanger Plumbing Kit FR-S\/BRZ\/GT86\/GR86 Stainless Filter","offer_id":67591225835793,"sku":"20-0966-03","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-1073_fa633992-592f-4a6b-a81a-ea43129c7dd2.jpg?v=1790638088"},{"product_id":"radium-fuel-rails-fr-s-brz-gt86-gr86","title":"Radium Fuel Rails, FR-S\/BRZ\/GT86\/GR86 — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0111-02 Fuel Rails FR-S\/BRZ\/GT86\/GR86 — Select Product\u003c\/li\u003e\n\u003cli\u003e20-0111-PK Fuel Rail Plumbing Kit FR-S\/BRZ\/GT86\/GR86 — Select Product\u003c\/li\u003e\n\u003cli\u003e20-0352 DI ECU Mount Kit FR-S\/BRZ\/86 — Optional Parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0111-02 Fuel Rail, FR-S\/BRZ\/GT86\/GR86\u003c\/h4\u003e\n  \u003cdiv style=\"min-width:300px;float:left;\"\u003e\n\u003cp\u003eThe Radium Engineering fuel rails are designed for the engine found in the Subaru BRZ (FA20D), Scion FR-S (FU-GSE), and Toyota 86 (4U-GSE). Manufactured with a large 0.69'\"internal bore, the fuel rail can support all necessary engine power requirements. The left\/right rails are identical and feature anodized aluminum bodies and mounting brackets. This kit includes fuel rails and mounting brackets. Fittings and adapters sold separately. This option is ideal for users wanting to do their own custom lines and plumbing.\u003c\/p\u003e\n\u003cp\u003eThe fuel rail end ports are tapped for 8AN ORB and the center port is tapped for 6AN ORB.\u003c\/p\u003e\n\u003cp\u003e6AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/6an-orb-fittings\"\u003eHERE\u003c\/a\u003e\u003cbr\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8AN-ORB-Fittings\"\u003eHERE\u003c\/a\u003e\u003cbr\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\"\u003eHERE\u003c\/a\u003e\u003cbr\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pressure-Gauge-0-100psi\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e    \n  \u003c\/div\u003e\n  \u003cdiv style=\"float:left;\"\u003e\n\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0111-02n_1.jpg\" style=\"width:240px;\" id=\"myImg\" class=\"myImages\"\u003e    \n  \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0111-PK Fuel Rail Plumbing, FR-S\/BRZ\/GT86\/GR86\u003c\/h4\u003e\n  \u003cdiv style=\"min-width:300px;float:left;\"\u003e\n\u003cp\u003eThe plumbing kit includes the items shown in the image below and allows easy hookup to the factory feed line. Has all the parts needed to complete the fuel rail installation. The PTFE hoses are resistant to all fuel types.\u003c\/p\u003e    \n  \u003c\/div\u003e\n  \u003cdiv style=\"float:left;\"\u003e\n\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0111-PK_1.jpg\" style=\"width:240px;\" id=\"myImg\" class=\"myImages\"\u003e    \n  \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0352 Radium ECU Mount\u003c\/h4\u003e\n  \u003cdiv style=\"min-width:300px;float:left;\"\u003e\n    \u003cp\u003eFor early models, the ECU mount prevents the need to cut the OEM steel ECU mount and permits easy access to the RH fuel rail.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThis is not compatible with the 2022+ BRZ and GR86.\u003c\/em\u003e\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"float:left;\"\u003e\n\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0352n.jpg\" style=\"width:240px;\" id=\"myImg\" class=\"myImages\"\u003e    \n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0111-02 Fuel Rails FR-S\/BRZ\/GT86\/GR86","offer_id":67591226163473,"sku":"20-0111-02","price":179.95,"currency_code":"USD","in_stock":true},{"title":"20-0111-PK Fuel Rail Plumbing Kit FR-S\/BRZ\/GT86\/GR86","offer_id":67591226196241,"sku":"20-0111-PK","price":119.95,"currency_code":"USD","in_stock":true},{"title":"20-0352 DI ECU Mount Kit FR-S\/BRZ\/86","offer_id":67591226229009,"sku":"20-0352","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0111-02n_cd6b0dfd-8c29-4eb7-a0f4-887869c8f85a.jpg?v=1790638090"},{"product_id":"radium-master-cylinder-brace-fr-s-brz-gt86-gr86","title":"Radium Master Cylinder Brace, FR-S\/BRZ\/GT86\/GR86","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0104-00 Master Cylinder Brace FR-S\/BRZ\/GT86\/GR86 Black\u003c\/li\u003e\n\u003cli\u003e20-0104-01 Master Cylinder Brace FR-S\/BRZ\/GT86\/GR86 Green\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhen the brake pedal is depressed, not all the mechanical energy is transferred into hydraulic brake line pressure. Unfortunately some of the energy is wasted flexing the thin firewall. With the Radium Engineering master cylinder brace, firewall flexing is eliminated allowing all of the brake pedal input force to be applied for stopping the vehicle. This enables a firmer pedal feel and more responsive brake system.\u003c\/p\u003e\n\u003cp\u003eThe Radium Engineering brake master cylinder brace installs on the LH strut tower and provides needed support and immediate response for hard braking. The billet aluminum design is lightweight yet very stiff. The strategically selected adjustment screw prevents damage to the master cylinder housing with the use of a large diameter aluminum head. The included stainless steel \"easy-on\" locknut prohibits any potential slippage of the set preload.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePRODUCT VIDEO\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/aOcr6nLlpd0\" title=\"Cure for Scion FR-S\/Subaru BRZ firewall flex during braking\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0104-00 Master Cylinder Brace FR-S\/BRZ\/GT86\/GR86 Black","offer_id":67591226458385,"sku":"20-0104-00","price":79.95,"currency_code":"USD","in_stock":true},{"title":"20-0104-01 Master Cylinder Brace FR-S\/BRZ\/GT86\/GR86 Green","offer_id":67591226491153,"sku":"20-0104-01","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0104-0X.jpg?v=1790638094"},{"product_id":"radium-catch-can-kits-2022-brz-gr86","title":"Radium Catch Can Kits, 2022+ BRZ\/GR86 — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0911-FL PCV Catch Can Kit, 2022+ BRZ\/GR86 — Select Product\u003c\/li\u003e\n\u003cli\u003e20-0902-FL CCV Catch Can Kit, FR-S\/BRZ\/GT86\/GR86 — Select Product\u003c\/li\u003e\n\u003cli\u003e20-0913-FL Dual Catch Can Kit, 2022+ BRZ\/GR86 — Select Product\u003c\/li\u003e\n\u003cli\u003e18-0210 Rubber Hose Support Spring, 1m Long, 10AN — Optional Support Spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe catch can draws out oil and water condensation from the crankcase gasses that would otherwise be drawn into the intake manifold. This prevents oil buildup in the intake, intercooler system walls, throttle body, and intake manifold. This effectively raises the octane, can increase engine performance from cleaner inlet air, and can lower hydrocarbon emissions. The closed system prevents unwanted oil vapors from entering into the cabin. Catch can kits include everything needed for a complete installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFLUID LOCK® CATCH CANS\u003c\/h3\u003e\n\u003cp\u003eIn 2022, Radium Engineering implemented a revolutionary design change to the 7 fluid ounce standard catch can. An inherent problem always existed with typical catch cans when not serviced regularly. The fluid contaminants will eventually leave the reservoir pouring into the air intake system causing poor engine performance. To resolve this issue, Radium created the Fluid Lock® Catch Can. This contains a patented mechanism that prevents the reservoir from overfilling and traps the collected fluids until it is emptied.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 240px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/4193\/7449\/files\/FL3_a_Internals.jpg\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCOLLECTION \u0026amp; EMPTYING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe rate that your catch cans will collect oil and moisture contaminants will vary from one individual vehicle to the next, so there is no set emptying interval. PCV catch cans tend to collect more than CCV catch cans. You should check the level of your catch can using the integrated dipstick starting at 3-4 weeks of driving and repeat as needed to determine how often they should be emptied based on what you see.\u003c\/p\u003e\n\u003cp\u003eCatch cans can be emptied by unscrewing the lower reservoir and removing it from the vehicle to dump out, or in cases where there is available space under the catch can, the \u003ca href=\"https:\/\/www.radiumauto.com\/products\/catch-can-petcock-drain-kit\"\u003ePetcock Drain Kit\u003c\/a\u003e can be installed and used to drain them.\u003c\/p\u003e\n\u003cp\u003eIn cases where oil collection is excessive you may have to address an issue with the engine. The reasons a catch can will collect an excess of oil include\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcessive blowby from engine damage\u003c\/li\u003e\n\u003cli\u003eCrankcase windage from an over-full oil level\u003c\/li\u003e\n\u003cli\u003ePoor placement of breather ports and\/or poor baffling inside breather ports\u003c\/li\u003e\n\u003cli\u003ePCV valve not closing and leaking under heavy load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0911-FL CATCH CAN KIT, PCV, 2022+ BRZ\/GR86, FLUID LOCK\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0911-FL.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe PCV kit mounts on the RH side of the engine bay.\u003c\/p\u003e\n\u003cp\u003eThis catch can runs inline with the 5\/8\" PCV (positive crankcase ventilation) valve. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV \"check\" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience \"metered\" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. \u003c\/p\u003e\n\u003cp\u003eNOTE: Because the Radium Engineering catch cans are pressure sealed, they are great for boosted applications as well. Connecting to the intake manifold is permitted.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0902-FL CATCH CAN KIT, CCV, FR-S\/BRZ\/GT86\/GR86, FLUID LOCK\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0902-FL.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe CCV kit mounts on the LH side of the engine bay.\u003c\/p\u003e\n\u003cp\u003eThis catch can runs inline with the 1\/2\" breather port. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience vacuum and would normally be drawing unwanted crankcase vapors, unspent fuel, and oil sludge into the air filter intake pipe. If the engine is turbocharged or supercharged and you are finding oil accumulation stuck in the intercooler, this catch can is a necessity as oil will lower the thermal efficiency properties of the heat exchange process.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0913-FL DUAL CATCH CAN KIT, 2022+ BRZ\/GR86, FLUID LOCK\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0913-FL.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eFor the ultimate in engine protection, Radium Engineering recommends the 20-0913-FL Dual Catch Can Kit.\u003c\/p\u003e\n\u003cp\u003eThis kit utilizes both the CCV and PCV catch can kits, as shown below.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0911-FL PCV Catch Can Kit, 2022+ BRZ\/GR86","offer_id":67591227048209,"sku":"20-0911-FL","price":229.95,"currency_code":"USD","in_stock":true},{"title":"20-0902-FL CCV Catch Can Kit, FR-S\/BRZ\/GT86\/GR86","offer_id":67591227080977,"sku":"20-0902-FL","price":229.95,"currency_code":"USD","in_stock":true},{"title":"20-0913-FL Dual Catch Can Kit, 2022+ BRZ\/GR86","offer_id":67591227113745,"sku":"20-0913-FL","price":449.95,"currency_code":"USD","in_stock":true},{"title":"18-0210 Rubber Hose Support Spring, 1m Long, 10AN","offer_id":67591227146513,"sku":"18-0210","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0913-FL.jpg?v=1790638105"},{"product_id":"radium-fuel-rails-toyota-3s-ge-and-3s-gte-gen-3-5","title":"Radium Fuel Rail, Toyota 3S-GE and 3S-GTE, Gen 3-5","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0949 Fuel Rail, Toyota 3S-GE and 3S-GTE, Gen 3-5\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufactured with a large 0.7\" internal bore, the Radium Engineering fuel rail can support all necessary engine power requirements.\u003c\/p\u003e\n\u003cp\u003eThe 2 fuel rail ports are tapped for 8AN ORB. Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8AN-ORB-Fittings\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pressure-Gauge-0-100psi\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"20-0949 Fuel Rail, Toyota 3S-GE and 3S-GTE, Gen 3-5","offer_id":67591227310353,"sku":"20-0949","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0949_1200px_wide.jpg?v=1790638106"},{"product_id":"radium-10an-male-press-in-fittings-toyota-valve-covers","title":"Radium Press-in Valve Cover Fittings for Toyota Engines — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0408 10AN Male Press-Fit 1JZ\/2JZ Intake Excluding 2JZ-GE VVT-i\u003c\/li\u003e\n\u003cli\u003e20-0409 10AN Male Press-Fit All Toyota 2JZ Exhaust\u003c\/li\u003e\n\u003cli\u003e20-0509 10AN Male Press-Fit Toyota 1JZ VVT-i Exhaust\u003c\/li\u003e\n\u003cli\u003e20-0609 10AN Male Press-Fit Toyota 1JZ Non VVT-i Exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRadium Engineering 10AN low profile swivel fittings convert the OEM PCV valve and\/or OEM crankcase breather ports from their original barb fittings into a 10AN male swivel fitting connection for use when converting to large breather lines for a competition catch can with large breather lines. These install by simply pressing in to the valve cover. No drilling or welding is required.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: when installing these fittings in place of a PCV valve, a new PCV valve will need to be installed inline or on the catch can in order to maintain the connection to the intake manifold.\u003c\/em\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0408 10AN Male Press-Fit 1JZ\/2JZ Intake Excluding 2JZ-GE VVT-i","offer_id":67591227343121,"sku":"20-0408","price":59.95,"currency_code":"USD","in_stock":true},{"title":"20-0409 10AN Male Press-Fit All Toyota 2JZ Exhaust","offer_id":67591227375889,"sku":"20-0409","price":59.95,"currency_code":"USD","in_stock":true},{"title":"20-0509 10AN Male Press-Fit Toyota 1JZ VVT-i Exhaust","offer_id":67591227408657,"sku":"20-0509","price":59.95,"currency_code":"USD","in_stock":true},{"title":"20-0609 10AN Male Press-Fit Toyota 1JZ Non VVT-i Exhaust","offer_id":67591227441425,"sku":"20-0609","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/Banjo_Press-In_Fittings.jpg?v=1790638107"},{"product_id":"radium-catch-can-kit-toyota-gr-corolla","title":"Radium Catch Can Kits, Toyota GR Corolla","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0759-FL CCV Catch Can Kit, GR Corolla\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe catch can draws out oil and water condensation from the crankcase gasses that would otherwise be drawn into the intake manifold. This prevents oil buildup in the intake, intercooler system walls, throttle body, and intake manifold. This effectively raises the octane, can increase engine performance from cleaner inlet air, and can lower hydrocarbon emissions. The closed system prevents unwanted oil vapors from entering into the cabin. Catch can kits include everything needed for a complete installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFLUID LOCK® CATCH CANS\u003c\/h3\u003e\n\u003cp\u003eIn 2022, Radium Engineering implemented a revolutionary design change to the 7 fluid ounce standard catch can. An inherent problem always existed with typical catch cans when not serviced regularly. The fluid contaminants will eventually leave the reservoir pouring into the air intake system causing poor engine performance. To resolve this issue, Radium created the Fluid Lock® Catch Can. This contains a patented mechanism that prevents the reservoir from overfilling and traps the collected fluids until it is emptied.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/FL3_a_Internals.jpg\" style=\"width:240px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCOLLECTION \u0026amp; EMPTYING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe rate that your catch cans will collect oil and moisture contaminants will vary from one individual vehicle to the next, so there is no set emptying interval. PCV catch cans tend to collect more than CCV catch cans. You should check the level of your catch can using the integrated dipstick starting at 3-4 weeks of driving and repeat as needed to determine how often they should be emptied based on what you see.\u003c\/p\u003e\n\u003cp\u003eCatch cans can be emptied by unscrewing the lower reservoir and removing it from the vehicle to dump out, or in cases where there is available space under the catch can, the \u003ca href=\"https:\/\/www.radiumauto.com\/products\/catch-can-petcock-drain-kit\"\u003ePetcock Drain Kit\u003c\/a\u003e can be installed and used to drain them.\u003c\/p\u003e\n\u003cp\u003eIn cases where oil collection is excessive you may have to address an issue with the engine. The reasons a catch can will collect an excess of oil include\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcessive blowby from engine damage\u003c\/li\u003e\n\u003cli\u003eCrankcase windage from an over-full oil level\u003c\/li\u003e\n\u003cli\u003ePoor placement of breather ports and\/or poor baffling inside breather ports\u003c\/li\u003e\n\u003cli\u003ePCV valve not closing and leaking under heavy load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e20-0759-FL CCV CATCH CAN KIT, GR COROLLA\u003c\/h3\u003e\n\u003cp\u003eThe catch can kit runs inline between the crankcase vent (CCV) port on the valve cover and the turbocharger inlet port. At low loads, it experiences atmospheric pressure. However, when the engine is at high load (WOT), the line will experience high flow from the crankcase into the intake system. This would normally lead to oil and sludge accumulation in the turbocharger, intercooler, intake manifold, etc. The CCV catch can captures this and promotes clean filtered air back into the intake. The catch can mounts to threaded studs on the RH strut tower. No permanent modifications are required. The catch can kit is compatible with the OEM engine cover.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNOTE: In some installations, a check engine light will trigger. This is rare when all engines components are OEM. Please know that some aftermarket intake systems can create a CRANKCASE VENTILATION SYSTEM check engine light on their own.\u003c\/em\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0759-FL CCV Catch Can Kit, GR Corolla","offer_id":67591227474193,"sku":"20-0759-FL","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0759-FL1200px_wide.jpg?v=1790638108"},{"product_id":"radium-catch-can-kits-toyota-mk5-supra","title":"Radium Catch Can Kits, Toyota MK5 Supra","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0749-FL PCV Catch Can Kit, MK5 Supra\u003c\/li\u003e\n\u003cli\u003e20-0750-FL CCV Catch Can Kit, MK5 Supra\u003c\/li\u003e\n\u003cli\u003e20-0751-FL Dual Catch Can Kit, MK5 Supra\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe catch can draws out oil and water condensation from the crankcase gasses that would otherwise be drawn into the intake manifold. This prevents oil buildup in the intake, intercooler system walls, throttle body, and intake manifold. This effectively raises the octane, can increase engine performance from cleaner inlet air, and can lower hydrocarbon emissions. The closed system prevents unwanted oil vapors from entering into the cabin. Catch can kits include everything needed for a complete installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFLUID LOCK® CATCH CANS\u003c\/h3\u003e\n\u003cp\u003eIn 2022, Radium Engineering implemented a revolutionary design change to the 7 fluid ounce standard catch can. An inherent problem always existed with typical catch cans when not serviced regularly. The fluid contaminants will eventually leave the reservoir pouring into the air intake system causing poor engine performance. To resolve this issue, Radium created the Fluid Lock® Catch Can. This contains a patented mechanism that prevents the reservoir from overfilling and traps the collected fluids until it is emptied.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/FL3_a_Internals.jpg\" style=\"width: 240px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCOLLECTION \u0026amp; EMPTYING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe rate that your catch cans will collect oil and moisture contaminants will vary from one individual vehicle to the next, so there is no set emptying interval. PCV catch cans tend to collect more than CCV catch cans. You should check the level of your catch can using the integrated dipstick starting at 3-4 weeks of driving and repeat as needed to determine how often they should be emptied based on what you see.\u003c\/p\u003e\n\u003cp\u003eCatch cans can be emptied by unscrewing the lower reservoir and removing it from the vehicle to dump out, or in cases where there is available space under the catch can, the \u003ca href=\"https:\/\/www.radiumauto.com\/products\/catch-can-petcock-drain-kit\"\u003ePetcock Drain Kit\u003c\/a\u003e can be installed and used to drain them.\u003c\/p\u003e\n\u003cp\u003eIn cases where oil collection is excessive you may have to address an issue with the engine. The reasons a catch can will collect an excess of oil include\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcessive blowby from engine damage\u003c\/li\u003e\n\u003cli\u003eCrankcase windage from an over-full oil level\u003c\/li\u003e\n\u003cli\u003ePoor placement of breather ports and\/or poor baffling inside breather ports\u003c\/li\u003e\n\u003cli\u003ePCV valve not closing and leaking under heavy load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0749-FL PCV Catch Can Kit, MK5 Supra\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0749-FL.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe PCV catch can kit runs inline between the ventilation valve and the intake pipe. It mounts to threaded bosses on the front radiator support. This location stays clear of aftermarket parts such as an upgraded turbocharger or intake tubing. The PCV catch can traps unwanted \"metered\" crankcase vapor, unspent fuel, and oil sludge. It promotes clean filtered air back into the turbocharger inlet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe PCV catch can kit is compatible and recommended to be used with the CCV catch can kit. See 20-0750-FL below.\u003c\/li\u003e\n\u003cli\u003eNo extra inline check valve is required since Radium catch cans are pressure sealed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0750-FL Catch Can Kit CCV MK5 Supra\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0750-FL.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe CCV catch can mounts to 2 holes on the front radiator support. It was designed specifically to clear strut braces. Furthermore, this location stays clear of aftermarket parts such as an upgraded turbocharger or intake tubing.\u003c\/p\u003e\n\u003cp\u003eTo retain factory functionality, the CCV catch can runs inline between the crankcase vent (CCV) port and the intake pipe. At low loads, it experiences atmospheric pressure. However, when the engine is at high load (WOT), the line will experience high flow from the crankcase into the intake system. This would normally lead to oil and sludge accumulation in the air filter intake pipe. This oil accumulation would spread and be found in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance. The CCV catch can captures this and promotes clean filtered air back into the intake.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe CCV catch can kit does NOT address blow-by from the PCV side of the crankcase.\u003c\/li\u003e\n\u003cli\u003eThe CCV catch can kit is compatible and recommended to be used with the PCV catch can kit. See 20-0749-FL above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0751-FL Dual Catch Can Kit MK5 Supra\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0751-FLnew.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eFor the ultimate in engine protection, Radium recommends 20-0751 Dual Catch Can Kit, MK5 Supra. This kit utilizes both the PCV and CCV catch can kits detailed above.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0749-FL PCV Catch Can Kit, MK5 Supra","offer_id":67591227506961,"sku":"20-0749-FL","price":209.95,"currency_code":"USD","in_stock":true},{"title":"20-0750-FL CCV Catch Can Kit, MK5 Supra","offer_id":67591227539729,"sku":"20-0750-FL","price":309.95,"currency_code":"USD","in_stock":true},{"title":"20-0751-FL Dual Catch Can Kit, MK5 Supra","offer_id":67591227572497,"sku":"20-0751-FL","price":509.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0751-FLnew.jpg?v=1790638108"},{"product_id":"radium-coolant-tank-kit-toyota-gr-corolla","title":"Radium Coolant Tank Kit, Toyota GR Corolla — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0767 Coolant Tank Kit GR Corolla — Selection\u003c\/li\u003e\n\u003cli\u003e18-0076-A11 Radiator Cap Type-A 1.1Bar Black — Radium Cap\u003c\/li\u003e\n\u003cli\u003e18-0076-A13 Radiator Cap Type-A 1.3Bar Black — Radium Cap\u003c\/li\u003e\n\u003cli\u003e18-0076-A15 Radiator Cap Type-A 1.5Bar Black — Radium Cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBecause of continuous and intense heat cycling with track use, plastic coolant tanks have a reputation of failing over time. Fortunately, the rugged 2-piece Radium Engineering replacement is CNC machined and anodized for increased longevity. And because aluminum is a superior thermal conductor material, heat transfer is further improved. Additionally, the metal construction is robust enough to use in racing applications.\u003c\/p\u003e\n\u003cp\u003eThis kit directly replaces the plastic Toyota tank. A specially designed mounting bracket secures to existing threaded holes and adapter fittings interface with the factory hoses. The tank functionality remains the same as the OEM cooling system. Furthermore, the tank holds the same volume of coolant as the factory tank. However, the reduced size allows more room in the engine bay for other modifications and easier access to the engine for servicing.\u003cbr\u003e\u003cbr\u003eThe Radium Engineering Coolant Expansion Tank has proved itself over the years in many applications all over the world, in race and street vehicles.The internal design features two chambers with cross-over passages at the top and bottom. The coolant tank also has an internal swirl feature aiding in de-aerating the system.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePRESSURE CAP\u003c\/h3\u003e\n\u003cp\u003eThe OEM Toyota cap has a pressure rating of 1.08 Bar. Various pressure reliefs of the Radium Engineering Type-A cap can be used.\u003cbr\u003e\u003cbr\u003eTo select a Radium Engineering cap, use the check boxes above. More info on the caps \u003ca href=\"https:\/\/www.radiumauto.com\/products\/radiator-caps\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0767 Coolant Tank Kit GR Corolla","offer_id":67591227605265,"sku":"20-0767","price":349.95,"currency_code":"USD","in_stock":true},{"title":"18-0076-A11 Radiator Cap Type-A 1.1Bar Black","offer_id":67591227638033,"sku":"18-0076-A11","price":29.95,"currency_code":"USD","in_stock":true},{"title":"18-0076-A13 Radiator Cap Type-A 1.3Bar Black","offer_id":67591227670801,"sku":"18-0076-A13","price":29.95,"currency_code":"USD","in_stock":true},{"title":"18-0076-A15 Radiator Cap Type-A 1.5Bar Black","offer_id":67591227703569,"sku":"18-0076-A15","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0767.jpg?v=1790638109"},{"product_id":"radium-dual-catch-can-kit-mk4-supra","title":"Radium Catch Can Kits, MK4 Supra","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0387-FL Dual Catch Can Kit, MK4 Supra\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe catch can draws out oil and water condensation from the crankcase gasses that would otherwise be drawn into the intake manifold. This prevents oil buildup in the intake, intercooler system walls, throttle body, and intake manifold. This effectively raises the octane, can increase engine performance from cleaner inlet air, and can lower hydrocarbon emissions. The closed system prevents unwanted oil vapors from entering into the cabin. Catch can kits include everything needed for a complete installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFLUID LOCK® CATCH CANS\u003c\/h3\u003e\n\u003cp\u003eIn 2022, Radium Engineering implemented a revolutionary design change to the 7 fluid ounce standard catch can. An inherent problem always existed with typical catch cans when not serviced regularly. The fluid contaminants will eventually leave the reservoir pouring into the air intake system causing poor engine performance. To resolve this issue, Radium created the Fluid Lock® Catch Can. This contains a patented mechanism that prevents the reservoir from overfilling and traps the collected fluids until it is emptied.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 240px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/FL3_a_Internals.jpg\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCOLLECTION \u0026amp; EMPTYING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe rate that your catch cans will collect oil and moisture contaminants will vary from one individual vehicle to the next, so there is no set emptying interval. PCV catch cans tend to collect more than CCV catch cans. You should check the level of your catch can using the integrated dipstick starting at 3-4 weeks of driving and repeat as needed to determine how often they should be emptied based on what you see.\u003c\/p\u003e\n\u003cp\u003eCatch cans can be emptied by unscrewing the lower reservoir and removing it from the vehicle to dump out, or in cases where there is available space under the catch can, the \u003ca href=\"https:\/\/www.radiumauto.com\/products\/catch-can-petcock-drain-kit\"\u003ePetcock Drain Kit\u003c\/a\u003e can be installed and used to drain them.\u003c\/p\u003e\n\u003cp\u003eIn cases where oil collection is excessive you may have to address an issue with the engine. The reasons a catch can will collect an excess of oil include\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcessive blowby from engine damage\u003c\/li\u003e\n\u003cli\u003eCrankcase windage from an over-full oil level\u003c\/li\u003e\n\u003cli\u003ePoor placement of breather ports and\/or poor baffling inside breather ports\u003c\/li\u003e\n\u003cli\u003ePCV valve not closing and leaking under heavy load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e20-0387-FL Dual Catch Can Kit, MK4 Supra, Fluid Lock\u003c\/h3\u003e\n\u003cp\u003eThese catch cans vent-to-engine permitting a true PCV system. The 2 catch cans function completely independent of each other and do NOT vent-to-atmosphere (VTA), thus are emissions and track legal. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Closed systems prevent unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eOne catch can plumbs inline with the PCV (positive crankcase ventilation) valve and retains it's factory function. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV valve closes and this hose experiences no flow. The PCV hose will experience metered vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: Because the Radium catch cans are pressure sealed, they are great for this boosted application so intake manifold connection is permitted. The hose and fittings for the PCV catch can are -6AN.\u003c\/p\u003e\n\u003cp\u003eThe other catch can plumbs inline with the CCV (crankcase vent) port experiences atmospheric pressure at low loads. But when the engine is at high load (WOT), this hose will experience blow-by flow from the crankcase. This would normally lead to oil and sludge accumulation in the air filter intake pipe. Oil accumulation will occur in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance. The hose and fittings for the CCV catch can are -8AN.\u003c\/p\u003e\n\u003cp\u003eBecause of the many OEM component variations for this chassis, 3 different brackets are included for optimal mounting. These multiple locations provide a solution for all RHD and LHD vehicles including those using a large single turbo, the stock twin turbos, the updated brake master cylinder, and even early models that have rear brake TRAC. All brackets use factory holes and integrate perfectly with the surrounding components. No cutting, drilling or permanent modification to the vehicle is required.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0387-FL Dual Catch Can Kit, MK4 Supra","offer_id":67591227736337,"sku":"20-0387-FL","price":519.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0387-FL.jpg?v=1790638114"},{"product_id":"radium-egr-block-off-2jz-gte","title":"Radium EGR Block-Off, 2JZ-GTE","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0390 EGR Block-Off 2JZ-GTE\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAn exhaust gas recirculation (EGR) system transfers hot exhaust gasses back through the intake manifold in order to lower nitrogen oxide emission levels. However, the EGR inevitably increases intake temperatures and dilutes the necessary oxygen to produce horsepower.\u003c\/p\u003e\n\u003cp\u003eThis kit seals all related ports when the factory EGR system is removed from the engine including ports in the intake manifold, cylinder head, and vacuum ports. It cleans up the engine bay by decreasing clutter and disarray, and eliminates the need for factory Toyota EGR gasket replacements.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis product is to be used on offroad vehicles only\u003c\/li\u003e\n\u003cli\u003eThis kit does not meet emission standards and is not to be used on public roads\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"20-0390 EGR Block-Off 2JZ-GTE","offer_id":67591227769105,"sku":"20-0390","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0390_A.jpg?v=1790638115"},{"product_id":"radium-catch-can-kit-toyota-chaser-mark-ii-cresta","title":"Radium Catch Can Kits, Toyota Chaser, Mark II, Cresta","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0738-FL PCV Catch Can Kit, 96-01 Chaser\/Mark II\/Cresta\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe catch can draws out oil and water condensation from the crankcase gasses that would otherwise be drawn into the intake manifold. This prevents oil buildup in the intake, intercooler system walls, throttle body, and intake manifold. This effectively raises the octane, can increase engine performance from cleaner inlet air, and can lower hydrocarbon emissions. The closed system prevents unwanted oil vapors from entering into the cabin. Catch can kits include everything needed for a complete installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFLUID LOCK® CATCH CANS\u003c\/h3\u003e\n\u003cp\u003eIn 2022, Radium Engineering implemented a revolutionary design change to the 7 fluid ounce standard catch can. An inherent problem always existed with typical catch cans when not serviced regularly. The fluid contaminants will eventually leave the reservoir pouring into the air intake system causing poor engine performance. To resolve this issue, Radium created the Fluid Lock® Catch Can. This contains a patented mechanism that prevents the reservoir from overfilling and traps the collected fluids until it is emptied.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/FL3_a_Internals.jpg\" style=\"width:240px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCOLLECTION \u0026amp; EMPTYING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe rate that your catch cans will collect oil and moisture contaminants will vary from one individual vehicle to the next, so there is no set emptying interval. PCV catch cans tend to collect more than CCV catch cans. You should check the level of your catch can using the integrated dipstick starting at 3-4 weeks of driving and repeat as needed to determine how often they should be emptied based on what you see.\u003c\/p\u003e\n\u003cp\u003eCatch cans can be emptied by unscrewing the lower reservoir and removing it from the vehicle to dump out, or in cases where there is available space under the catch can, the \u003ca href=\"https:\/\/www.radiumauto.com\/products\/catch-can-petcock-drain-kit\"\u003ePetcock Drain Kit\u003c\/a\u003e can be installed and used to drain them.\u003c\/p\u003e\n\u003cp\u003eIn cases where oil collection is excessive you may have to address an issue with the engine. The reasons a catch can will collect an excess of oil include\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcessive blowby from engine damage\u003c\/li\u003e\n\u003cli\u003eCrankcase windage from an over-full oil level\u003c\/li\u003e\n\u003cli\u003ePoor placement of breather ports and\/or poor baffling inside breather ports\u003c\/li\u003e\n\u003cli\u003ePCV valve not closing and leaking under heavy load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e20-0738-FL PCV CATCH CAN KIT, 96-01 CHASER\/MARK II\/CRESTA\u003c\/h3\u003e\n\u003cp\u003eThe catch can kit runs inline between the PCV valve and the intake manifold. It mounts to threaded bosses just behind the RH strut tower near the firewall.\u003c\/p\u003e\n\u003cp\u003eWhen the intake manifold pressure is close to or greater than atmospheric pressure, the PCV valve closes and this hose experiences no flow. The PCV hoses will experience metered vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. No extra inline check valve is required since Radium catch cans are pressure sealed.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0738-FL PCV Catch Can Kit, 96-01 Chaser\/Mark II\/Cresta","offer_id":67591227834641,"sku":"20-0738-FL","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0738-FL1x1.jpg?v=1790638116"},{"product_id":"radium-fuel-delivery-system-toyota-mk4-supra","title":"Radium Fuel Delivery System, Toyota MK4 Supra — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e14-0153 8AN ORB to 10AN Male — Required Items\u003c\/li\u003e\n\u003cli\u003e14-0150 8AN ORB Plug — Required Items\u003c\/li\u003e\n\u003cli\u003e20-0776 FPD-R 8AN ORB — Required Items\u003c\/li\u003e\n\u003cli\u003e20-0029 Fuel Pressure Gauge 0-100psi — Required Items\u003c\/li\u003e\n\u003cli\u003e20-1510 Fuel Hanger MK4 Supra Fits Walbro GSS342 or AEM 50-1200 — Choose Fuel Pump Hanger\u003c\/li\u003e\n\u003cli\u003e20-1511 Fuel Hanger MK4 Supra Fits Ti Automotive E5LM — Choose Fuel Pump Hanger\u003c\/li\u003e\n\u003cli\u003e20-1512 Fuel Hanger MK4 Supra Fits Walbro F90000267\/274\/285 — Choose Fuel Pump Hanger\u003c\/li\u003e\n\u003cli\u003e20-0415-03 Fuel Hanger Plumbing Kit MK4 Supra Stainless Filter — Choose Fuel Hanger Plumbing Kit (Filter Type)\u003c\/li\u003e\n\u003cli\u003e20-0415-05 Fuel Hanger Plumbing Kit MK4 Supra Microglass Filter — Choose Fuel Hanger Plumbing Kit (Filter Type)\u003c\/li\u003e\n\u003cli\u003e20-0215 Fuel Rail Top Feed Conversion Toyota 2JZ-GTE — Choose Fuel Rail\u003c\/li\u003e\n\u003cli\u003e20-0371 Fuel Rail Toyota 2JZ-GE — Choose Fuel Rail\u003c\/li\u003e\n\u003cli\u003e20-1623-00 DMR Direct Mount Regulator, Black — Choose Fuel Pressure Regulator\u003c\/li\u003e\n\u003cli\u003e20-1623-01 DMR Direct Mount Regulator, Green — Choose Fuel Pressure Regulator\u003c\/li\u003e\n\u003cli\u003eWalbro F90000274 — Choose Pump #1\u003c\/li\u003e\n\u003cli\u003eTi Automotive BKS1001 — Choose Pump #1\u003c\/li\u003e\n\u003cli\u003e17-0031 DIY Fuel Pump Wiring Kit — DIY Wiring Kits (1 per pump)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis comprehensive kit includes all the Radium Engineering components required to construct a high performance fuel delivery system for the MKIV Toyota Supra. The Radium in-tank fuel pump hanger, feed and return lines, fuel rail, and pressure regulator completely replace the restrictive OEM fuel system with a setup capable of supporting well over 1,000hp and safe to use with ethanol fuels.\u003c\/p\u003e\n\u003cp\u003eThe in-tank fuel hanger replaces the factory unit and can be configured with a variety of different fuel pump options. More details on the fuel hanger can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pump-hanger-toyota-supra-mk4\"\u003eHERE\u003c\/a\u003e. The fuel lines include pre-fabricated PTFE hoses and retainers and is then sent through a high flow fuel filter. AN fittings and other required parts are provided to plumb everything to and from the fuel rail.\u003cbr\u003e\u003cbr\u003eThe included fuel rail, fittings, and regulator feed the 2JZ-GTE engine and converts to top feed injectors (not included). More details on the fuel rail can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-rail-top-feed-conversion-toyota-2jz-gte\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eHOW TO ORDER\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRequired items are preselected. If you already have any of the parts with check boxes next to them, you can uncheck them to remove them from the package\u003c\/li\u003e\n\u003cli\u003eSelect a fuel pump hanger that matches the part number of the fuel pump(s) you wish to install into it.\u003c\/li\u003e\n\u003cli\u003eSelect the fuel hanger plumbing kit by filter type. Stainless are 10 micron and Microglass are a finer 6 micron filtration. Stainless filters have elements that can be cleaned and reused.\u003c\/li\u003e\n\u003cli\u003eChoose your fuel pumps, make sure that they match the hanger selected earlier. If using a pump not available from Radium, choose none to receive no pumps. Pumps will NOT come preinstalled into the hanger: assembly is required.\u003c\/li\u003e\n\u003cli\u003eDIY fuel pump wiring kits are preselected. If you do not need all 3 wiring kits, deselect the ones you do not want.\u003c\/li\u003e\n\u003cli\u003eAfter all selections are made double check them for accuracy and add item to cart and proceed to checkout.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"14-0153 8AN ORB to 10AN Male","offer_id":67591227867409,"sku":"14-0153","price":9.95,"currency_code":"USD","in_stock":true},{"title":"14-0150 8AN ORB Plug","offer_id":67591227900177,"sku":"14-0150","price":14.95,"currency_code":"USD","in_stock":true},{"title":"20-0776 FPD-R 8AN ORB","offer_id":67591227932945,"sku":"20-0776","price":89.95,"currency_code":"USD","in_stock":true},{"title":"20-0029 Fuel Pressure Gauge 0-100psi","offer_id":67591227965713,"sku":"20-0029","price":49.95,"currency_code":"USD","in_stock":true},{"title":"20-1510 Fuel Hanger MK4 Supra Fits Walbro GSS342 or AEM 50-1200","offer_id":67591227998481,"sku":"20-1510","price":579.95,"currency_code":"USD","in_stock":true},{"title":"20-1511 Fuel Hanger MK4 Supra Fits Ti Automotive E5LM","offer_id":67591228031249,"sku":"20-1511","price":579.95,"currency_code":"USD","in_stock":true},{"title":"20-1512 Fuel Hanger MK4 Supra Fits Walbro F90000267\/274\/285","offer_id":67591228064017,"sku":"20-1512","price":599.95,"currency_code":"USD","in_stock":true},{"title":"20-0415-03 Fuel Hanger Plumbing Kit MK4 Supra Stainless Filter","offer_id":67591228096785,"sku":"20-0415-03","price":479.95,"currency_code":"USD","in_stock":true},{"title":"20-0415-05 Fuel Hanger Plumbing Kit MK4 Supra Microglass Filter","offer_id":67591228129553,"sku":"20-0415-05","price":459.95,"currency_code":"USD","in_stock":true},{"title":"20-0215 Fuel Rail Top Feed Conversion Toyota 2JZ-GTE","offer_id":67591228162321,"sku":"20-0215","price":199.95,"currency_code":"USD","in_stock":true},{"title":"20-0371 Fuel Rail Toyota 2JZ-GE","offer_id":67591228195089,"sku":"20-0371","price":224.95,"currency_code":"USD","in_stock":true},{"title":"20-1623-00 DMR Direct Mount Regulator, Black","offer_id":67591228227857,"sku":"20-1623-00","price":179.95,"currency_code":"USD","in_stock":true},{"title":"20-1623-01 DMR Direct Mount Regulator, Green","offer_id":67591228260625,"sku":"20-1623-01","price":179.95,"currency_code":"USD","in_stock":true},{"title":"Walbro F90000274","offer_id":67591228293393,"sku":"WALB F90000274","price":124.95,"currency_code":"USD","in_stock":true},{"title":"Ti Automotive BKS1001","offer_id":67591228326161,"sku":"TI BKS1001-4","price":799.95,"currency_code":"USD","in_stock":true},{"title":"17-0031 DIY Fuel Pump Wiring Kit","offer_id":67591228358929,"sku":"17-0031","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/MK4_Supra_Delivery_Kit.jpg?v=1790638116"},{"product_id":"radium-fuel-delivery-system-toyota-mk5-supra","title":"Radium Fuel Delivery System, Toyota MK5 Supra — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0760 Fuel Pump Hanger MK5 Supra — Required Items\u003c\/li\u003e\n\u003cli\u003e20-0753 Port Injection Kit MK5 Supra — Required Items\u003c\/li\u003e\n\u003cli\u003e20-0029 Fuel Pressure Gauge 0-100psi — Required Items\u003c\/li\u003e\n\u003cli\u003e20-1000-0808 8AN ORB Swivel Banjo to 8AN Male — Required Items\u003c\/li\u003e\n\u003cli\u003e17-0031 DIY Fuel Pump Wiring Kit — Required Items\u003c\/li\u003e\n\u003cli\u003e20-0761-05 Plumbing Kit, MK5 Supra, Microglass — Choose Fuel Hanger Plumbing Kit (Filter Type)\u003c\/li\u003e\n\u003cli\u003e20-0761-03 Plumbing Kit, MK5 Supra, Stainless — Choose Fuel Hanger Plumbing Kit (Filter Type)\u003c\/li\u003e\n\u003cli\u003e20-1623-00 DMR Direct Mount Regulator, Black — Choose Regulator Color\u003c\/li\u003e\n\u003cli\u003e20-1623-01 DMR Direct Mount Regulator, Green — Choose Regulator Color\u003c\/li\u003e\n\u003cli\u003eTi Automotive BKS1001 — Choose Pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis comprehensive kit includes all the Radium Engineering components required to construct a high performance port injection fuel delivery system for the Toyota MK5 GR Supra.\u003c\/p\u003e\n\u003cp\u003eThe fuel pump hanger retrofits with the factory direct injection LPFP adding an additional pump specifically for port injection. It can be configured with a variety of different fuel pump options. More details on the 20-0760 fuel hanger can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pump-Hanger-MK5-Supra\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe fuel lines, a high flow fuel filter, AN fittings, and undercarriage hard line retainers replace all OEM components. More details on the 20-0761-0X fuel hanger plumbing kits can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pump-Hanger-MK5-Supra\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFuel enters the engine through a 8AN banjo fitting on the inlet of a high flow B58 port injection fuel rail. More details on the 20-0753 fuel rail can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Port-Injection-Kit-MK5-Supra\"\u003eHERE.\u003c\/a\u003e NOTE: Fuel Injectors are required.\u003c\/p\u003e\n\u003cp\u003eThe included FPR regulates fuel pressure with boost pressure at a 1:1 ratio. More details on the 20-1623-00 DMR can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe DMR is monitored and adjusted using a 0-100psi gauge. More details regarding the 20-0029 gauge can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pressure-Gauge-0-100psi\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eHOW TO ORDER\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRequired items are preselected. If you already have any of the parts with check boxes next to them, you can uncheck them to remove them from the package\u003c\/li\u003e\n\u003cli\u003eSelect a fuel pump hanger that matches the part number of the fuel pump(s) you wish to install into it.\u003c\/li\u003e\n\u003cli\u003eSelect the fuel hanger plumbing kit by filter type. Stainless are 10 micron and Microglass are a finer 6 micron filtration. Stainless filters have elements that can be cleaned and reused.\u003c\/li\u003e\n\u003cli\u003eChoose your fuel pumps, make sure that they match the hanger selected earlier. If using a pump not available from Radium, choose none to receive no pumps. Pumps will NOT come preinstalled into the hanger: assembly is required.\u003c\/li\u003e\n\u003cli\u003eDIY fuel pump wiring kits are preselected. If you do not need wiring kits, deselect the ones you do not want.\u003c\/li\u003e\n\u003cli\u003eAfter all selections are made double check them for accuracy and add item to cart and proceed to checkout.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"20-0760 Fuel Pump Hanger MK5 Supra","offer_id":67591228391697,"sku":"20-0760","price":399.95,"currency_code":"USD","in_stock":true},{"title":"20-0753 Port Injection Kit MK5 Supra","offer_id":67591228424465,"sku":"20-0753","price":749.95,"currency_code":"USD","in_stock":true},{"title":"20-0029 Fuel Pressure Gauge 0-100psi","offer_id":67591228457233,"sku":"20-0029","price":49.95,"currency_code":"USD","in_stock":true},{"title":"20-1000-0808 8AN ORB Swivel Banjo to 8AN Male","offer_id":67591228490001,"sku":"20-1000-0808","price":34.95,"currency_code":"USD","in_stock":true},{"title":"17-0031 DIY Fuel Pump Wiring Kit","offer_id":67591228522769,"sku":"17-0031","price":79.95,"currency_code":"USD","in_stock":true},{"title":"20-0761-05 Plumbing Kit, MK5 Supra, Microglass","offer_id":67591228555537,"sku":"20-0761-05","price":479.95,"currency_code":"USD","in_stock":true},{"title":"20-0761-03 Plumbing Kit, MK5 Supra, Stainless","offer_id":67591228588305,"sku":"20-0761-03","price":499.95,"currency_code":"USD","in_stock":true},{"title":"20-1623-00 DMR Direct Mount Regulator, Black","offer_id":67591228621073,"sku":"20-1623-00","price":179.95,"currency_code":"USD","in_stock":true},{"title":"20-1623-01 DMR Direct Mount Regulator, Green","offer_id":67591228653841,"sku":"20-1623-01","price":179.95,"currency_code":"USD","in_stock":true},{"title":"Ti Automotive BKS1001","offer_id":67591228686609,"sku":"TI BKS1001-4","price":799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/GR_Supra_Fuel_Delivery_Kit.png?v=1790638117"},{"product_id":"radium-fuel-filter-mount-mk4-supra-sc300-sc400","title":"Radium Fuel Filter Mount, MK4 Supra, SC300, SC400 — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0385 Fuel Filter Mount MK4 Supra SC300 SC400 — Selection\u003c\/li\u003e\n\u003cli\u003e20-0220-03 Fuel Filter, 10AN ORB Ports, Stainless, 10 Micron — Select Filter\u003c\/li\u003e\n\u003cli\u003e20-0220-05 Fuel Filter, 10AN ORB Ports, Microglass, 6 Micron — Select Filter\u003c\/li\u003e\n\u003cli\u003e20-1220-05 Fuel Filter, 10AN ORB Ports, Check Valve, Microglass, 6 Micron — Select Filter\u003c\/li\u003e\n\u003cli\u003e20-1220-03 Fuel Filter, 10AN ORB Ports, Check Valve, Stainless, 10 Micron — Select Filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe lower half of the billet aluminum clamp secures to the unibody using the OEM fuel filter threaded bosses. The filter is then secured using the upper half of the billet aluminum clamp. All hardware is stainless steel. \u003cbr\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0385 Fuel Filter Mount MK4 Supra SC300 SC400","offer_id":67591228719377,"sku":"20-0385","price":59.95,"currency_code":"USD","in_stock":true},{"title":"20-0220-03 Fuel Filter, 10AN ORB Ports, Stainless, 10 Micron","offer_id":67591228752145,"sku":"20-0220-03","price":144.95,"currency_code":"USD","in_stock":true},{"title":"20-0220-05 Fuel Filter, 10AN ORB Ports, Microglass, 6 Micron","offer_id":67591228784913,"sku":"20-0220-05","price":124.95,"currency_code":"USD","in_stock":true},{"title":"20-1220-05 Fuel Filter, 10AN ORB Ports, Check Valve, Microglass, 6 Micron","offer_id":67591228817681,"sku":"20-1220-05","price":149.95,"currency_code":"USD","in_stock":true},{"title":"20-1220-03 Fuel Filter, 10AN ORB Ports, Check Valve, Stainless, 10 Micron","offer_id":67591228850449,"sku":"20-1220-03","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0385.jpg?v=1790638118"},{"product_id":"radium-fuel-filter-mount-mk5-supra","title":"Radium Fuel Filter Mount, MK5 Supra — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0752 Fuel Filter Mount, MK5 Supra — Selection\u003c\/li\u003e\n\u003cli\u003e20-0220-03 Fuel Filter, 10AN ORB Ports, Stainless, 10 Micron — Select Filter\u003c\/li\u003e\n\u003cli\u003e20-0220-05 Fuel Filter, 10AN ORB Ports, Microglass, 6 Micron — Select Filter\u003c\/li\u003e\n\u003cli\u003e20-1220-05 Fuel Filter, 10AN ORB Ports, Check Valve, Microglass, 6 Micron — Select Filter\u003c\/li\u003e\n\u003cli\u003e20-1220-03 Fuel Filter, 10AN ORB Ports, Check Valve, Stainless, 10 Micron — Select Filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHardware for installing a Radium Engineering fuel filter in the MK5 Supra. The upper half of the billet aluminum clamp secures to OEM threaded studs using the provided flange nuts. These studs are on the opposing side of the plastic undertray just to the left of the transmission. The lower half of the billet aluminum clamp secures the filter using stainless steel bolts.\u003c\/p\u003e\n\u003cp\u003eThe installed photo shows the \u003ca href=\"https:\/\/www.radiumauto.com\/products\/10an-orb-fittings\"\u003eFuel Filter\u003c\/a\u003e and \u003ca href=\"https:\/\/www.radiumauto.com\/products\/10an-orb-fittings\"\u003e10AN ORB Fittings\u003c\/a\u003e (both sold separately).\u003cbr\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0752 Fuel Filter Mount, MK5 Supra","offer_id":67591228883217,"sku":"20-0752","price":59.95,"currency_code":"USD","in_stock":true},{"title":"20-0220-03 Fuel Filter, 10AN ORB Ports, Stainless, 10 Micron","offer_id":67591228915985,"sku":"20-0220-03","price":144.95,"currency_code":"USD","in_stock":true},{"title":"20-0220-05 Fuel Filter, 10AN ORB Ports, Microglass, 6 Micron","offer_id":67591228948753,"sku":"20-0220-05","price":124.95,"currency_code":"USD","in_stock":true},{"title":"20-1220-05 Fuel Filter, 10AN ORB Ports, Check Valve, Microglass, 6 Micron","offer_id":67591228981521,"sku":"20-1220-05","price":149.95,"currency_code":"USD","in_stock":true},{"title":"20-1220-03 Fuel Filter, 10AN ORB Ports, Check Valve, Stainless, 10 Micron","offer_id":67591229014289,"sku":"20-1220-03","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0752.jpg?v=1790638119"},{"product_id":"radium-fuel-hanger-toyota-chaser-mark-ii-cresta","title":"Radium Fuel Pump Hanger, Toyota Chaser, Mark II, Cresta","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0940 Fuel Hanger Toyota Chaser\/Mark II\/Cresta Pumps Not Included — Selection\u003c\/li\u003e\n\u003cli\u003e20-0941 Single Pump Collector Add-On, Chaser\/Mark II\/Cresta — Add-On\u003c\/li\u003e\n\u003cli\u003e20-0441 Pump Clamp for 41-43mm Bodies — Add-On\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0940 Fuel Hanger Toyota Chaser\/Mark II\/Cresta\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0940.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe Radium Engineering Fuel Pump Hanger is a drop-in aftermarket fuel pump solution for supplying the fuel required to maximize power gains. It can be installed with 1 or 2 of the compatible pumps listed below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe feed port is tapped with 7\/8\"-14 female threads (10AN ORB).\u003c\/li\u003e\n\u003cli\u003eThe return port is tapped with 9\/16\"-18 female threads (6AN ORB).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMultiple adapter fittings are provided for connecting back to the OEM fuel lines. If a second pump is installed, an SAE quick connector is provided that snaps into the underside of the fuel hat simplifying installation. For later model vehicles that use the inverted flare feed line, a replacement PTFE feed hose is provided, as shown below.\u003c\/p\u003e\n\u003cp\u003eThe custom designed stainless electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels.\u003cbr\u003e\u003cbr\u003eNon-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Electrical hardware is included for the fuel pump(s). Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.\u003c\/p\u003e\n\u003cp\u003eRelay kits, such as \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DIY-Fuel-Pump-Wiring-Kit\"\u003e17-0031 DIY FUEL PUMP WIRING KIT\u003c\/a\u003e, are recommended to drive these new internal fuel pump(s).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0941 Single Pump Collector Add-On, Chaser\/Mark II\/Cresta\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\n\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0941_1200px_wide.jpg\"\u003e \u003cimg alt=\"Collector box positioning\" class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0941_Install-2.jpg\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis collector add-on kit attaches a collector around the fuel hanger pump. It is useful for applications that require additional fuel starvation protection. But is also perfect for scenarios where the OEM basket broke off and no longer attached to the tank.\u003c\/p\u003e\n\u003cp\u003eFor starvation protection, the fuel collector was designed to hold as much volume as possible. It is strategically located at an angle to keep fuel trapped during heavy acceleration. It features two 1-way fill valves that flow 355LPH each (710LPH total). Also, all fuel from the regulator returns directly into the collector. \u003c\/p\u003e\n\u003cp\u003eThe fuel collector is compatible with the OEM basket for extra protection. Physically, it is properly shaped for easy installation through the small OEM fuel tank access hole.\u003cbr\u003e\u003cbr\u003eIMPORTANT: This add-on kit requires the purchase of the 20-0940 fuel pump hanger and allows the use of only 1 fuel pump. It is only compatible with 39mm diameter fuel pumps. See the pump compatibility section for more details.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0940 Fuel Hanger Toyota Chaser\/Mark II\/Cresta Pumps Not Included","offer_id":67591229047057,"sku":"20-0940","price":549.95,"currency_code":"USD","in_stock":true},{"title":"20-0941 Single Pump Collector Add-On, Chaser\/Mark II\/Cresta","offer_id":67591229079825,"sku":"20-0941","price":99.95,"currency_code":"USD","in_stock":true},{"title":"20-0441 Pump Clamp for 41-43mm Bodies","offer_id":67591229112593,"sku":"20-0441","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0940.jpg?v=1790638119"},{"product_id":"radium-fuel-line-retaining-kit-mk5-supra","title":"Radium Fuel Line Retaining Kit, MK5 Supra","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0762 Fuel Line Retaining Kit MK5 Supra\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe factory uses plastic retainers for securing the OEM feed and EVAP lines. These fuel lines run from the back to the front of the vehicle. This Radium Engineering kit uses billet aluminum retainers that replace the OEM variations. Additionally, they permit extra hose locations for large aftermaket fuel lines, as depicted below.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0762 Fuel Line Retaining Kit MK5 Supra","offer_id":67591229145361,"sku":"20-0762","price":269.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0762.jpg?v=1790638120"},{"product_id":"radium-fuel-pulse-damper-kit-mk4-supra","title":"Radium Fuel Pulse Damper Kit, MK4 Supra","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-1389 Fuel Pulse Damper Kit MK4 Supra\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis Radium Engineering kit completely replaces the OEM fuel pulse damper (below) found on the JZA80 Supra 2JZ-GTE engine. It also replaces the fuel feed line from the filter to the fuel rail eliminating 4 restrictive banjo fittings (below). Because this kit uses 6AN size hoses, it can be used with an aftermarket fuel rail, or with the factory fuel rail (adapters are included for both options). This is a great option when an aftermarket fuel pulse damper cannot be mounted directly to the fuel rail.\u003c\/p\u003e\n\u003cp\u003eAnodized aluminum adapter fittings are included to permit the use of the OEM fuel rail or an aftermarket 8AN ORB fuel rail. The Radium fuel pulse damper (FPD-R) mounts to the OEM location using a stainless steel bracket. The FPD-R has a vacuum reference for high boosted engines. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: the larger FPD-XR is not compatible as it would interfere with the starter.\u003c\/em\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-1389 Fuel Pulse Damper Kit MK4 Supra","offer_id":67591229178129,"sku":"20-1389","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-1389.jpg?v=1790638121"},{"product_id":"radium-fuel-pump-adapter-for-toyota-hangers","title":"Radium Fuel Pump Adapter for Toyota Hangers","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0032 Toyota Hanger Outlet Adapter 6AN Male\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe Radium Engineering anodized aluminum adapter allows a 6AN hose to be used with many OEM Toyota fuel pump housing outlets including Lexus, Scion, and Lotus 2ZZ-GE variations. This style of pump module design by Toyota is found on almost every model since 1996 and is still used currently in many vehicles. We cannot confirm all vehicles so research may be required.\u003c\/p\u003e\n\u003cp\u003eNo modification to the fuel pump housing or vehicle is required. As shown below, the Radium Engineering adapter features an integrated O-ring for a leak-free positive connection.\u003c\/p\u003e\n\u003cp\u003eThe adapter fitting was designed to be ultra low-profile so the 6AN mating hose will have the best chance to fit underneath the OEM fuel pump access cover.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0032 Toyota Hanger Outlet Adapter 6AN Male","offer_id":67591229243665,"sku":"20-0032","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0032_Black2.jpg?v=1790638126"},{"product_id":"radium-fuel-pump-hanger-mk5-supra","title":"Radium Fuel Pump Hanger, MK5 Supra — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0760 Fuel Pump Hanger MK5 Supra — Select Hanger\u003c\/li\u003e\n\u003cli\u003e20-0761-03 Plumbing Kit, MK5 Supra, Stainless — Select Plumbing Kit\u003c\/li\u003e\n\u003cli\u003e20-0761-05 Plumbing Kit, MK5 Supra, Microglass — Select Plumbing Kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0760 Fuel Pump Hanger MK5 Supra\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0760.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n \u003cp\u003eThe Radium Engineering fuel pump hanger is an excellent solution for increasing fuel flow on the 2020+ Toyota GR Supra. The kit leaves the entire OEM direct injection system intact. However, it permits one additional independent 39mm fuel pump, specifically for auxiliary fuel such as port injection.\u003c\/p\u003e\n\u003cp\u003eThe entire OEM fuel system and its components are retained and operate exactly how BMW\/Toyota intended. The OEM brushless fuel pump, fuel pressure regulator, filters, collector box, venturi jet pump and level sensor all remain in place. The Radium hanger installs alongside these components and adds a complete second fuel system for adding port injection. For a compatible B58TU port injection system, click \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Port-Injection-Kit-MK5-Supra\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW IT WORKS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn additional fuel pump with a pre-pump filter sock is integrated into the OEM fuel collector basket. The fuel from this new pump is sent out of the fuel hat through a low-profile 8AN male adapter fitting.\u003c\/p\u003e\n\u003cp\u003eThis line must be regulated using a \u003ca href=\"https:\/\/www.radiumauto.com\/collections\/universal-pressure-regulators-1\"\u003efuel pressure regulator\u003c\/a\u003e (not included) and a \u003ca href=\"https:\/\/www.radiumauto.com\/products\/high-flow-fuel-filters\"\u003elow micron aftermarket filter\u003c\/a\u003e must be installed downstream. These components are not provided in this kit but are available separately.\u003c\/p\u003e\n\u003cp\u003eThe returning fuel enters the fuel hat through a low profile 6AN male fitting. Fuel enters the OEM collector basket through a machined fitting assembly. Inside the assembly features a deflector that evenly disperses the fuel and prevents turbulence and unwanted foam. The direct injection fuel feed is retained and there are no fuel tank modifications required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePREVENTING FUEL STARVATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSeveral systems work together to move fuel into the collector basket and keep it full at all times. This ensures that the pumps have adequate fuel available, even during aggressive driving. The internal pumps are supplied with fuel from 3 different sources: the venturi jet pump fuel scavenged from the passive side of the tank, the returned fuel from the fuel pressure regulators (direct injection FPR and port injection FPR), and the one-way fill valve on the bottom of the OEM collector basket. This valve allow fuel in, but not out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePORTS AND FITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe outlet on the fuel hat is female threaded for 8AN ORB (3\/4-16 O-ring). A male 8AN low profile banjo fitting comes preinstalled. This can always be changed using any \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\"\u003e8AN ORB\u003c\/a\u003e fitting.\u003cbr\u003e\u003cbr\u003eThe return port inlet on the fuel hat is female threaded for 8AN ORB (3\/4-16 O-ring). A male 6AN low profile banjo fitting comes preinstalled. This can always be changed using any \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\"\u003e8AN ORB\u003c\/a\u003e fitting.\u003c\/p\u003e\n\u003cp\u003eThe OEM direct injection pump outlet is an SAE quick connect to directly connect the OEM feed line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed stainless electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Electrical hardware is included for the fuel pumps and OEM level sender. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.\u003cbr\u003e\u003cbr\u003eNOTE: External wiring for the additional port injection pump is not included. Universal fuel pump wiring kits can be found \u003ca rel=\"noopener\" href=\"https:\/\/www.radiumauto.com\/products\/DIY-Fuel-Pump-Wiring-Kit\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0761-03 \u0026amp; 20-0761-05 Plumbing Kits, MK5 Supra\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0761-XX.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis plumbing kit includes everything required to plumb the fuel system between the Radium fuel pump hanger and a port injection fuel rail. For a compatible B58TU port injection system, click \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Port-Injection-Kit-MK5-Supra\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0760 Fuel Pump Hanger MK5 Supra","offer_id":67591229309201,"sku":"20-0760","price":399.95,"currency_code":"USD","in_stock":true},{"title":"20-0761-03 Plumbing Kit, MK5 Supra, Stainless","offer_id":67591229341969,"sku":"20-0761-03","price":499.95,"currency_code":"USD","in_stock":true},{"title":"20-0761-05 Plumbing Kit, MK5 Supra, Microglass","offer_id":67591229374737,"sku":"20-0761-05","price":479.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0760_e731583a-dda8-4605-a3e2-d8d9e265ab51.jpg?v=1790638127"},{"product_id":"radium-fuel-pump-hanger-toyota-supra-mk4","title":"Radium Fuel Pump Hanger, Toyota Supra MK4 — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-1510 Fuel Hanger MK4 Supra Fits Walbro GSS342 or AEM 50-1200 — Select Hanger\u003c\/li\u003e\n\u003cli\u003e20-1511 Fuel Hanger MK4 Supra Fits Ti Automotive E5LM — Select Hanger\u003c\/li\u003e\n\u003cli\u003e20-1512 Fuel Hanger MK4 Supra Fits Walbro F90000267\/274\/285 — Select Hanger\u003c\/li\u003e\n\u003cli\u003e20-0415-03 Fuel Hanger Plumbing Kit MK4 Supra Stainless Filter — Select Plumbing Kit\u003c\/li\u003e\n\u003cli\u003e20-0415-05 Fuel Hanger Plumbing Kit MK4 Supra Microglass Filter — Select Plumbing Kit\u003c\/li\u003e\n\u003cli\u003e20-1533 Check Valve 6AN ORB to 8.5mm Barb — Optional Parts\u003c\/li\u003e\n\u003cli\u003e20-1534 Check Valve 6AN ORB to 10mm Barb — Optional Parts\u003c\/li\u003e\n\u003cli\u003e13-1187 Triple Pump Base, 12mm Inlet Brushless Pumps — Optional Parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1510, 20-1511 \u0026amp; 20-1512 Fuel Pump Hangers, MK4 Supra\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\n\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1510.jpg\" alt=\"20-1510\"\u003e\u003cbr\u003e\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1511.jpg\" alt=\"20-1511\"\u003e\u003cbr\u003e\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1512.jpg\" alt=\"20-1512\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe Radium Engineering fuel pump hanger permits the use of 1, 2, or 3 aftermarket pumps in the stock MK4 Toyota Supra (JZA80) fuel tank. No permanent fuel access cover modification is required. To simplifying aftermarket -N hose plumbing, the 10AN ORB threaded feed port (depicted below) features a low profile 8AN male fitting and the 8AN ORB threaded return port features a low profile 6AN male fitting. Because the fuel pumps utilize integrated check valves, the pump outlets merge into a single 10AN billet collector. To reconnect the OEM return and vent hoses, barb fittings are also included.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch4\u003eVENTURI JET PUMP\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe siphon system has been redesigned to completely eliminate any restriction on the return line but still effectively scavenge fuel. This means higher flowing pumps can be safely used without inducing fuel pressure issues.\u003c\/li\u003e\n\u003cli\u003eThe new venturi jet pump will consume 15-45 LPH of fuel flow from the fuel pump(s), depending on the current fuel pressure. Take this fuel flow loss into consideration when sizing the fuel pump(s).\u003c\/li\u003e\n\u003cli\u003eFurthermore, there is a new high flow integrated check valve on the merged fuel pump outlet. This valve maintains fuel pressure after the engine is shut down. (Shown right)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003ch4\u003eFUEL STARVATION\u003c\/h4\u003e\n\u003cp\u003eA common issue with the dated OEM system is poor protection against fuel starvation. The Radium Engineering system incorporates a unique siphon jet pump. Using a venturi-effect, this \"mechanical\" pump draws fuel from outside the sub-tank and distributes it directly to the pump inlets.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch4\u003eELECTRICAL\u003c\/h4\u003e\n\u003cp\u003eAs shown below, the custom designed anti-rotation stainless electrical studs easily handle the high current demand that compact bulkhead connectors lack. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The low profile design keeps all wiring tucked nicely underneath the OEM fuel tank cover using the provided foam insulation.\u003c\/p\u003e\n\u003cp\u003eNonconductive acorn nuts are provided to prevent any accidental short circuits. Furthermore, the high quality in-tank wiring is insulated with chemically resistant ETFE. Electrical hardware is included for the fuel pump(s), OEM level sender, and OEM temperature sensor. Single pump applications can reuse the OEM fuel pump controller wiring, but it is recommended to upgrade the OEM wiring as these high flow fuel pumps draw additional current requiring larger gauge wire. Fuel pump wiring kits can be purchased \u003ca href=\"https:\/\/www.radiumauto.com\/products\/diy-fuel-pump-wiring-kit\"\u003eHERE\u003c\/a\u003e. Select qty1 for single pump applications, qty2 for dual pump applications, and qty3 for triple pump applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0415-03 \u0026amp; 20-0415-05 Fuel Hanger Plumbing Kits, MK4 Supra\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0415new.jpg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThese plumbing kits include everything required to plumb the fuel system between the Radium pump hanger and the fuel rail in the JZA80 Supra. This plumbing kit is designed to work best with a Radium Engineering fuel rail for the 2JZ (20-0215), but may also work with other aftermarket fuel rails. This kit IS NOT COMPATIBLE with the stock 2JZ fuel rail.\u003cbr\u003e\u003cbr\u003eThe kit includes a pre-made -8AN PTFE feed line that runs from the fuel pump hanger to the fuel filter. Then out of the fuel filter a pre-made -10AN is used to connect to the fuel rail inlet. The fuel lines clear the OEM fuel pump cover and do not require any cutting or drilling to get them past the fuel tank.\u003cbr\u003e\u003cbr\u003eFor the return line, -6AN E85 compatible rubber fuel hose runs from the pressure regulator bac k to the fuel pump hanger return port. The fuel lines run though these billet aluminum line retainers (green brackets) which are included. The return hose E85 compatible rubber and can be easily modified for installation of an in-line flex fuel sensor.\u003cbr\u003eThe included Radium Engineering fuel filter mounts underneath the vehicle using a specifically designed MKIV Supra (JZA80) bolt-on billet mount.\u003cbr\u003eDepending on the kit selected (-03,-05), the fuel filter will be assembled with a choice of different elements. Go \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-filter-elements\"\u003eHERE\u003c\/a\u003e for more filter element information.  The -05 version is most popular because it meets filtration requirements set forth by Bosch Motorsports and works well with E85.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003eINDEPENDENT INSTALLATION VIDEO\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6mNlHHxN8jY?si=3xmzVH05JPM9YT36\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-1510 Fuel Hanger MK4 Supra Fits Walbro GSS342 or AEM 50-1200","offer_id":67591229407505,"sku":"20-1510","price":579.95,"currency_code":"USD","in_stock":true},{"title":"20-1511 Fuel Hanger MK4 Supra Fits Ti Automotive E5LM","offer_id":67591229440273,"sku":"20-1511","price":579.95,"currency_code":"USD","in_stock":true},{"title":"20-1512 Fuel Hanger MK4 Supra Fits Walbro F90000267\/274\/285","offer_id":67591229473041,"sku":"20-1512","price":599.95,"currency_code":"USD","in_stock":true},{"title":"20-0415-03 Fuel Hanger Plumbing Kit MK4 Supra Stainless Filter","offer_id":67591229505809,"sku":"20-0415-03","price":479.95,"currency_code":"USD","in_stock":true},{"title":"20-0415-05 Fuel Hanger Plumbing Kit MK4 Supra Microglass Filter","offer_id":67591229538577,"sku":"20-0415-05","price":459.95,"currency_code":"USD","in_stock":true},{"title":"20-1533 Check Valve 6AN ORB to 8.5mm Barb","offer_id":67591229571345,"sku":"20-1533","price":39.95,"currency_code":"USD","in_stock":true},{"title":"20-1534 Check Valve 6AN ORB to 10mm Barb","offer_id":67591229604113,"sku":"20-1534","price":39.95,"currency_code":"USD","in_stock":true},{"title":"13-1187 Triple Pump Base, 12mm Inlet Brushless Pumps","offer_id":67591229636881,"sku":"13-1187","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-1512_6eee50b4-3931-429d-b7ae-1679c67f7778.jpg?v=1790638128"},{"product_id":"radium-fuel-rail-top-feed-conversion-toyota-1jz-gte-non-vvt-i","title":"Radium Fuel Rail, Top Feed Conversion, Toyota 1JZ-GTE (Non VVT-i)","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0235 Fuel Rail Top Feed Conversion Toyota 1JZ-GTE (Non VVT-i)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufactured with a large 0.69\" internal bore, the fuel rail can support all necessary engine power requirements. They are CNC machined from 6063 aluminum, media blasted, black anodized, and laser etched for a high quality surface finish. This kit is compatible with all fuel types including popular alcohol mixtures such as E85.\u003c\/p\u003e\n\u003cp\u003eThe Radium fuel rail converts the OEM side feed fuel injector setup to top feed, allowing the use of high flow fuel injectors. The kit includes 2 different sets of mounting feet allowing various height fuel injectors to be used. The anodized aluminum mounting feet secure the fuel rail to the intake manifold reusing the OEM Toyota thermal insulating spacers.\u003c\/p\u003e\n\u003cp\u003eThe fuel injector bores and the included press-fit injector seats are designed for 14mm injector O-rings. These seats include O-rings to prevent boost pressure leaks. They are CNC machined billet aluminum, anodized, and laser etched.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cp\u003eTo reuse the OEM fuel pressure regulator, select the 14-0285 8AN ORB to M12x1.25mm Fitting\u003cbr\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0235 Fuel Rail Top Feed Conversion Toyota 1JZ-GTE (Non VVT-i)","offer_id":67591229669649,"sku":"20-0235","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0235n_f2c71709-57de-43ab-bdee-6524b59eb047.jpg?v=1790638129"},{"product_id":"radium-fuel-rail-top-feed-conversion-toyota-2jz-gte","title":"Radium Fuel Rail, Top Feed Conversion, Toyota 2JZ-GTE","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0215 Fuel Rail Top Feed Conversion Toyota 2JZ-GTE\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufactured with a large 0.69\" internal bore, the fuel rail can support all necessary engine power requirements. They are CNC machined from a custom 6063 aluminum, media blasted, black anodized, and laser etched for a high quality surface finish. This kit is compatible with all fuel types including popular alcohol mixtures such as E85. \u003c\/p\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cp\u003eTo reuse the OEM fuel pressure regulator, select the \u003ca href=\"https:\/\/www.radiumauto.com\/products\/OEM-Fuel-Rail-Adapter-Fittings\"\u003e20-0301\u003c\/a\u003e. If securing to the front port, modification to the Traction Control TPS sensor is required when using the tall spacers. Check for firewall clearance if mounting on the rear port.\u003cbr\u003e\u003cbr\u003eTo reuse the factory fuel feed line, select 14-0285 8AN ORB to M12x1.25mm Female Fitting. This can secure to the rear port and reuse the OEM fuel feed banjo bolt.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0215 Fuel Rail Top Feed Conversion Toyota 2JZ-GTE","offer_id":67591229702417,"sku":"20-0215","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0215n_c6107f80-7038-40d4-93f7-35f930717a55.jpg?v=1790638130"},{"product_id":"radium-fuel-rail-toyota-1jz-gte-vvt-i","title":"Radium Fuel Rail, Toyota 1JZ-GTE (VVT-i)","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0768 Fuel Rail Toyota 1JZ-GTE (VVT-i)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufactured with a large 0.69\" internal bore, the fuel rail can support all necessary engine power requirements. They are CNC machined from 6063 aluminum, black anodized, and laser etched for a high quality surface finish. For flexibility, the fuel rail features four 8AN ORB ports and is compatible with all fuel types including popular alcohol mixtures such as E85.\u003cbr\u003e\u003cbr\u003eThe Radium fuel rail is compatible with the OEM 1JZ-GTE VVT-i top-feed fuel injectors and any aftermarket injectors that fit the OEM fuel rail. Injector bores are 11mm. The fuel rail re-uses the factory mounting bolts and plastic insulating spacers. Make sure these are present before beginning installation.\u003c\/p\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/radiumengineering.myshopify.com\/products\/8an-orb-fittings\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0768 Fuel Rail Toyota 1JZ-GTE (VVT-i)","offer_id":67591229735185,"sku":"20-0768","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0768_bcba47ed-79d0-4cd3-bef4-ff63fe1b9c7b.jpg?v=1790638131"},{"product_id":"radium-fuel-rail-toyota-2jz-ge","title":"Radium Fuel Rail, Toyota 2JZ-GE — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0371 Fuel Rail Toyota 2JZ-GE\u003c\/li\u003e\n\u003cli\u003e20-0871-PK Fuel Rail Plumbing Kit Toyota 2JZ-GE Returnless\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0371 Fuel Rail Toyota 2JZ-GE\u003c\/h4\u003e\n  \u003cdiv style=\"min-width:300px;float:left;\"\u003e\n\u003cp\u003eThe Radium fuel rail for the 6-cylinder Toyota 2JZ-GE (Non-Turbo) engine is manufactured with a large 8AN ORB internal bore supporting all horsepower requirements. They are CNC machined from 6063 aluminum, black anodized, and laser etched for a high quality surface finish. For flexibility, the fuel rail features four 8AN ORB ports and is compatible with all fuel types including popular alcohol mixtures such as E85.\u003c\/p\u003e\n    \u003cp\u003eLate model 2JZ-GE vehicles use a returnless fuel system where the fuel pressure regulator (FPR) is integrated into the pump assembly. However, early model 2JZ-GE vehicles use a traditional fuel system with the FPR mounted directly to the fuel rail. For these setups, an aftermarket fuel pressure regulator will be required.\u003c\/p\u003e\n    \u003cp\u003eThis fuel rail features four ports (both ends and two on the bottom) that are female tapped for 8AN ORB fittings. However, the front port is not useable unless the OEM engine harness is modified.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\nAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"float:left;\"\u003e\n    \u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0371n.jpg\" style=\"width:240px;\" id=\"myImg\" class=\"myImages\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0871-PK FUEL RAIL PLUMBING, TOYOTA 2JZ-GE, RETURNLESS\u003c\/h4\u003e\n  \u003cdiv style=\"min-width:300px;float:left;\"\u003e\n\u003cp\u003eThe fuel rail plumbing kit permits a complete fuel rail bolt-on affair. The provided inverted flare adapter fitting converts the factory hard line to 6AN. The included 6AN PTFE fuel line routes fuel to the rear fuel rail port through a low profile swivel fitting. A fuel pulse damper is provided to keep fuel pressure stable. The remaining fuel rail ports are plugged.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"float:left;\"\u003e\n    \u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0871-PK.jpg\" style=\"width:240px;\" id=\"myImg\" class=\"myImages\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0371 Fuel Rail Toyota 2JZ-GE","offer_id":67591229767953,"sku":"20-0371","price":224.95,"currency_code":"USD","in_stock":true},{"title":"20-0871-PK Fuel Rail Plumbing Kit Toyota 2JZ-GE Returnless","offer_id":67591229800721,"sku":"20-0871-PK","price":164.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0371n.jpg?v=1790638131"},{"product_id":"radium-fuel-rail-toyota-2zz-ge-1zz-fe","title":"Radium Fuel Rail, Toyota 2ZZ-GE\/1ZZ-FE — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0012-01 Fuel Rail Toyota 2ZZ-GE\/1ZZ-FE\u003c\/li\u003e\n\u003cli\u003e20-0012-PK Fuel Rail Plumbing Kit, Lotus Elise\/Exige\/2-Eleven 2ZZ-GE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0012-01 FUEL RAIL, TOYOTA 2ZZ-GE\/1ZZ-FE\u003c\/h4\u003e\n  \u003cdiv style=\"min-width:300px;float:left;\"\u003e\n    \u003cp\u003eThis high volume fuel rail works on all 2ZZ-GE and 1ZZ-FE engines. Both ends of the rail are tapped to 8AN ORB female threads. These ports use positive O-ring seals instead of tapered pipe threads which commonly damage aluminum threads and lead to fuel leaks.\u003c\/p\u003e\n\u003cp\u003eThe center port accommodates the OEM fuel pulse damper (not included) from the factory fuel rail. This helps alleviate all high frequency pressure fluctuations. \u003c\/p\u003e\n\u003cp\u003eThe end ports of this fuel rail are tapped for 8AN ORB. A center port for the factory fuel pulse damper is also included.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8AN-ORB-Fittings%0A\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator%0A\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pressure-Gauge-0-100psi\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"float:left;\"\u003e\n    \u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0012-01_Fuel_Rail_Toyota_2ZZ-GE.jpg\" style=\"width:240px;\" id=\"myImg\" class=\"myImages\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0012-PK Fuel Rail Plumbing Kit Toyota 2ZZ-GE\u003c\/h4\u003e\n  \u003cdiv style=\"min-width:100%;float:left;\"\u003e\n    \u003cp\u003eThis kit allows quick and easy hook-up to the factory fuel feed line.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"float:left;\"\u003e\n    \u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0012-PK.jpg\" style=\"width:240px;\" id=\"myImg\" class=\"myImages\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0012-01 Fuel Rail Toyota 2ZZ-GE\/1ZZ-FE","offer_id":67591229833489,"sku":"20-0012-01","price":219.95,"currency_code":"USD","in_stock":true},{"title":"20-0012-PK Fuel Rail Plumbing Kit, Lotus Elise\/Exige\/2-Eleven 2ZZ-GE","offer_id":67591229866257,"sku":"20-0012-PK","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0012-01_Fuel_Rail_Toyota_2ZZ-GE.jpg?v=1790638132"},{"product_id":"radium-fuel-rails-toyota-1-2-3uz-fe-vvt-i","title":"Radium Fuel Rails, Toyota 1UZ\/2UZ\/3UZ-FE VVT-i","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0963 Fuel Rails Toyota UZ VVT-i\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufactured with 0.7\" large internal bores, the Radium Engineering fuel rails can support all necessary engine power requirements.\u003c\/p\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB. Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cp\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8AN-ORB-Fittings\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pressure-Gauge-0-100psi\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEach fuel rail has three 8AN ORB (3\/4\"-16) ports or 6 total. Adapter fittings and fuel hose will need to be purchased separately.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0963 Fuel Rails Toyota UZ VVT-i","offer_id":67591229899025,"sku":"20-0963","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0963_1200x800_6d9a255d-45f5-42dd-b640-9f952754337a.jpg?v=1790638133"},{"product_id":"radium-fuel-rails-toyota-1gr-fe-single-vvt-i","title":"Radium Fuel Rails, Toyota 1GR-FE, Single VVT-i","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0897 Fuel Rails Toyota 1GR-FE Single VVT-i\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufactured with 0.69\" large internal bores, the Radium Engineering fuel rails can support all necessary engine power requirements. CNC machined aluminum mounting tabs are included for a factory fit and to maintain the original fuel rail height so both OEM or aftermarket equivalent injectors can work.\u003c\/p\u003e\n\u003cp\u003eEach fuel rail features two 8AN ORB threaded end ports (4 total). The two fuel rails and all necessary mounting hardware are provided. Fittings and hose will need to be individually purchased.\u003c\/p\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB. Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"20-0897 Fuel Rails Toyota 1GR-FE Single VVT-i","offer_id":67591229931793,"sku":"20-0897","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0897.jpg?v=1790638134"},{"product_id":"radium-fuel-rails-toyota-1uz-fe-non-vvt-i","title":"Radium Fuel Rails, Toyota 1UZ-FE Non VVT-i","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0961 Fuel Rails Toyota 1UZ-FE Non VVT-i\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufactured with 0.7\" large internal bores, the Radium Engineering fuel rails can support all necessary engine power requirements.\u003c\/p\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB. Each fuel rail has three 8AN ORB (3\/4\"-16) ports. Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8AN-ORB-Fittings\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pressure-Gauge-0-100psi\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"20-0961 Fuel Rails Toyota 1UZ-FE Non VVT-i","offer_id":67591229964561,"sku":"20-0961","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0961.jpg?v=1790638141"},{"product_id":"radium-fuel-rails-toyota-2gr-fe","title":"Radium Fuel Rails, Toyota 2GR-FE — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0198-02 Fuel Rails Toyota 2GR-FE\u003c\/li\u003e\n\u003cli\u003e20-0898-PK Fuel Rail Plumbing Kit Toyota 2GR-FE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0198-02 Fuel Rails Toyota 2GR-FE\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/4193\/7449\/files\/20-0198-02n.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n \u003cp\u003eManufactured with 0.69\" large internal bores, the Radium Engineering fuel rails can support all necessary engine power requirements. CNC machined aluminum mounting tabs are included for a factory fit and to maintain the original fuel rail height so both OEM or aftermarket equivalent injectors can work.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB fittings\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8AN-ORB-Fittings%0A\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pressure-Gauge-0-100psi\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0898-PK Fuel Rail Plumbing Kit Toyota 2GR-FE\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/4193\/7449\/files\/20-0898-PK.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n  \u003cul\u003e\n\u003cp\u003eThis kit includes all necessary adapters to plumb the 20-0198-02 fuel rails to the OEM fuel system. It also includes a Radium Engineering FPD-R that replaces the OEM fuel pulse damper. The kit makes the fuel rails truly bolt-on with no other parts required.\u003c\/p\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0198-02 Fuel Rails Toyota 2GR-FE","offer_id":67591229997329,"sku":"20-0198-02","price":249.95,"currency_code":"USD","in_stock":true},{"title":"20-0898-PK Fuel Rail Plumbing Kit Toyota 2GR-FE","offer_id":67591230030097,"sku":"20-0898-PK","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0198-02n_608ad1a3-898a-49e5-ac71-64029882d5ac.jpg?v=1790638142"},{"product_id":"radium-fuel-rails-toyota-2gr-fse","title":"Radium Fuel Rails, Toyota 2GR-FSE","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0899 Fuel Rails Toyota 2GR-FSE\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufactured with 0.7\" large internal bores, the Radium Engineering fuel rails can support all necessary engine power requirements. Stainless steel mounting tabs (shown) are included for superior strength.\u003c\/p\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB. Appropriate fittings must be selected based on the specific application and will need to be purchased separately. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"20-0899 Fuel Rails Toyota 2GR-FSE","offer_id":67591230128401,"sku":"20-0899","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0899n.jpg?v=1790638142"},{"product_id":"radium-fuel-rails-toyota-2uz-fe-non-vvt-i","title":"Radium Fuel Rails, Toyota 2UZ-FE Non VVT-i — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0962 Fuel Rails Toyota 2UZ-FE Non VVT-i — Fuel Rails\u003c\/li\u003e\n\u003cli\u003e20-0964 Fuel Rail Plumbing Kit Toyota 2UZ-FE Non VVT-i — Plumbing Kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"spec-box3\"\u003e\n  \u003ch4\u003e20-0962 Fuel Rails Toyota 2UZ-FE Non VVT-i\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0962.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eManufactured with 0.7\" large internal bores, the Radium Engineering fuel rails can support all necessary engine power requirements. The modular mounting feet make these fuel rails compatible with the early non VVT-i intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB fittings. Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cp\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8AN-ORB-Fittings\"\u003eHERE\u003c\/a\u003e\u003cbr\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\"\u003eHERE\u003c\/a\u003e\u003cbr\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pulse-damper-direct-mount-kits\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pressure-Gauge-0-100psi\"\u003eHERE\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eEach fuel rail has three 8AN ORB (3\/4\"-16) ports. Adapter fittings and fuel hose will need to be purchased separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0964 Fuel Rail Plumbing Kit Toyota 2UZ-FE Non VVT-i\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0964.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n \u003cp\u003eWhen used with the Radium Engineering fuel rails, this kit includes everything required to get the engine running.\u003cbr\u003e\u003cbr\u003eAs shown below, an adjustable fuel pressure regulator and fuel gauge are included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0962 Fuel Rails Toyota 2UZ-FE Non VVT-i","offer_id":67591230259473,"sku":"20-0962","price":259.95,"currency_code":"USD","in_stock":true},{"title":"20-0964 Fuel Rail Plumbing Kit Toyota 2UZ-FE Non VVT-i","offer_id":67591230292241,"sku":"20-0964","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0962.jpg?v=1790638143"},{"product_id":"radium-fuel-rails-toyota-3s-gte-gen-1-2-3","title":"Radium Fuel Rail, Toyota 3S-GE and 3S-GTE, Gen 1-2","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0849 Fuel Rail, Toyota 3S-GE and 3S-GTE, Gen 1-2\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufactured with a large 0.7\" internal bore, the Radium Engineering fuel rail can support all necessary engine power requirements.\u003c\/p\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB. Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8AN-ORB-Fittings\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pressure-Gauge-0-100psi\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"20-0849 Fuel Rail, Toyota 3S-GE and 3S-GTE, Gen 1-2","offer_id":67591230456081,"sku":"20-0849","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0849.jpg?v=1790638144"},{"product_id":"radium-injector-seats-for-toyota-top-feed-fuel-rails","title":"Radium Injector Seats for Toyota Top Feed Fuel Rails","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0216 Toyota Injector Seat 19mm\u003c\/li\u003e\n\u003cli\u003e20-0516 Toyota Air Assist Injector Seat\u003c\/li\u003e\n\u003cli\u003e20-0848 Toyota Injector Seat 20mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese are the same machined aluminum injector seats used in many Radium Engineering fuel rails. They are required when converting the OEM fuel injectors to aftermarket fuel injectors. They simply press-fit into the intake manifold injector ports with no modifications required. Using the included FKM O-ring, they seal into the machined injector counterbore preventing vacuum (or boost) leaks. The injector seat bores are designed to be used with a common 14mm lower injector O-ring. \u003cbr\u003e\u003cbr\u003e\u003cem\u003eNOTE: Because they are compatible with different cylinder engines, the injector seats are sold individually (not a set). Change quantity accordingly.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0216 TOYOTA INJECTOR SEAT\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0216new.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003e20-0216 is used to convert side feed injectors to top feed injectors. These seats are anodized green.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0516 TOYOTA AIR ASSIST INJECTOR SEAT\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0516.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis seat is used to convert Toyota air-assist injectors to standard top feed injectors. The Toyota air assist injector seats are anodized black.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0848 TOYOTA INJECTOR SEAT, 20MM\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0848.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003e20-0848 is used to convert side feed injectors to top feed injectors. These injector seats are anodized black, as shown below.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0216 Toyota Injector Seat 19mm","offer_id":67591230587153,"sku":"20-0216","price":14.95,"currency_code":"USD","in_stock":true},{"title":"20-0516 Toyota Air Assist Injector Seat","offer_id":67591230619921,"sku":"20-0516","price":14.95,"currency_code":"USD","in_stock":true},{"title":"20-0848 Toyota Injector Seat 20mm","offer_id":67591230652689,"sku":"20-0848","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/Toyota_Injector_Seats.jpg?v=1790638144"},{"product_id":"radium-intake-manifold-gasket-mk5-supra","title":"Radium Intake Manifold Gasket, MK5 Supra","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e18-0085 Intake Manifold Gasket MK5 Supra\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eThese Radium Engineering gaskets press into the intake manifold ports and seal to the cylinder head. They are compatible with many B58TU engines including the following:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eB58B30O1 (B58B30B)\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003eB58B30M1 (B58B30C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: These gaskets are sold each. If a full set is needed, add 6 of them to your cart.\u003c\/span\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"18-0085 Intake Manifold Gasket MK5 Supra","offer_id":67591230750993,"sku":"18-0085","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/18-0085.jpg?v=1790638145"},{"product_id":"radium-master-cylinder-brace-toyota-gr-corolla","title":"Radium Master Cylinder Brace, Toyota GR Corolla","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0773 Master Cylinder Brace Toyota GR Corolla\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eWhen the brake pedal is depressed, not all the mechanical energy is transferred into hydraulic brake line pressure. Unfortunately some of the energy is wasted flexing the thin firewall. With the Radium Engineering master cylinder brace, firewall flexing is eliminated allowing all of the brake pedal input force to be applied for stopping the vehicle. This enables a firmer pedal feel and more responsive brake system.\u003c\/p\u003e\n\u003cp\u003eThe Radium Engineering brake master cylinder brace installs on the strut tower and provides the needed support and immediate response for hard braking. The billet aluminum design is lightweight yet very stiff. Because it is a 1-piece design, there are no unwanted secondary flexing. Furthermore, it utilizes 3 mounting points that promote reinforcement. \u003cbr\u003e\u003cbr\u003ePhysically, the brace is very streamline supporting aftermarket modifications mounted near the strut tower. The strategically selected adjustment screw prevents damage to the master cylinder housing with the use of a large diameter aluminum head. The included stainless steel jam nut prohibits any potential slippage of the set preload. \u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0773 Master Cylinder Brace Toyota GR Corolla","offer_id":67591230914833,"sku":"20-0773","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0773.jpg?v=1790638146"},{"product_id":"radium-port-injection-kit-mk5-supra","title":"Radium Port Injection Kit, MK5 Supra — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0753 Port Injection Kit MK5 Supra\u003c\/li\u003e\n\u003cli\u003e20-0753-PK Fuel Rail Plumbing Kit MK5 Supra\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0753 Port Injection Kit MK5 Supra\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\n  \u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0753_PIK.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\n  \u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe Radium Engineering Port Injection Kit (PIK) installs between the intake manifold and the cylinder head. It permits the use of port injectors for the additional fuel required for highly-modified B58TU engines. This does NOT replace the OEM direct injection system.\u003c\/p\u003e\n\u003cp\u003eThe fuel rail is CNC machined from extruded 6063 aluminum and laser etched for a high quality surface finish. Both end ports are machined with 8AN ORB (3\/4-16 female) threads. For a list of all 8AN ORB adapter fittings, go \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\"\u003eHERE\u003c\/a\u003e. The injectors are mounted at a calculated angle to ensure proper spray into the center of the intake ports without sacrificing interference from surrounding components. The PIK adapter plate can also be used as a simple intake manifold spacer without using the fuel rail. All that is required are \u003ca href=\"https:\/\/www.radiumauto.com\/products\/2AN-ORB-Fittings\"\u003e2AN ORB Plugs\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelocation hardware is provided to allow the OEM engine vanity cover to be reused. These 4 adapters install into the underside of the vanity engine cover and make up for the intake manifold shifting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0753-PK FUEL RAIL PLUMBING KIT, MK5 SUPRA\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0753-PK.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis kit permits the OEM low pressure fuel feed hose to be connected to the rear of the port injection fuel rail. Installs in under 10 minutes. If using an independent port injection fuel system (\u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pump-Hanger-MK5-Supra\"\u003esee Radium 20-0760 fuel pump hanger\u003c\/a\u003e), this plumbing kit would not be required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0753 Port Injection Kit MK5 Supra","offer_id":67591230947601,"sku":"20-0753","price":749.95,"currency_code":"USD","in_stock":true},{"title":"20-0753-PK Fuel Rail Plumbing Kit MK5 Supra","offer_id":67591230980369,"sku":"20-0753-PK","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0753_PIK.jpg?v=1790638147"},{"product_id":"radium-fuel-brake-line-retainer-kit-mk4-supra","title":"Radium Fuel Brake Line Retainer Kit, MK4 Supra","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0416 Fuel Brake Line Retainer Kit MK4 Supra\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe Radium Engineering retainer kit supports large aftermarket fuel lines under the MKIV (JZA80) Toyota Supra. The retainers are made from 6061 aluminum and anodized to resist oxidation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eNOTES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit does not include aftermarket fuel lines\u003c\/li\u003e\n\u003cli\u003eThere is no way of determining what size fuel lines can be used with these retainers as there are many different types (rubber, braided, PTFE, aluminum, steel, etc). Reference the dimensions illustrated above to determine fuel line compatibility\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"20-0416 Fuel Brake Line Retainer Kit MK4 Supra","offer_id":67591231013137,"sku":"20-0416","price":159.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0416new.jpg?v=1790638147"}],"url":"https:\/\/autoshopactive.com\/collections\/radium-toyota-lexus.oembed","provider":"Auto Shop Active","version":"1.0","type":"link"}