{"title":"Radium — Nissan \/ Infiniti","description":"\u003cp\u003eRadium Engineering parts for Nissan \/ Infiniti applications. Select the correct part number and confirm vehicle fitment.\u003c\/p\u003e","products":[{"product_id":"radium-fuel-rail-adapters","title":"Radium Fuel Rail Adapters for OEM Components — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0301 FPR Adapter 8AN ORB 11mm Bore 39mm Spacing M6 — 8AN ORB to OEM FPR Adapters\u003c\/li\u003e\n\u003cli\u003e20-0302 FPR Adapter 8AN ORB 16mm Bore 39mm Spacing M6 — 8AN ORB to OEM FPR Adapters\u003c\/li\u003e\n\u003cli\u003e20-0303 FPR Adapter 8AN ORB 11mm Bore 32mm Spacing M5 — 8AN ORB to OEM FPR Adapters\u003c\/li\u003e\n\u003cli\u003e20-0595 FPR Adapter 8AN ORB 7mm Bore 39mm Offset M6 — 8AN ORB to OEM FPR Adapters\u003c\/li\u003e\n\u003cli\u003e20-0603 FPR Adapter 8AN ORB 7mm Bore 39mm Spacing M6 — 8AN ORB to OEM FPR Adapters\u003c\/li\u003e\n\u003cli\u003e20-0842 FPR Adapter 8AN ORB 16mm Bore 50mm Spacing M6 — 8AN ORB to OEM FPR Adapters\u003c\/li\u003e\n\u003cli\u003e14-0285 FPR Adapter 8AN ORB to M12x1.25 Female — 8AN ORB to OEM FPR Adapters\u003c\/li\u003e\n\u003cli\u003e20-0459 FPD Adapter 8AN ORB 27mm Bore — 8AN ORB to OEM FPD Adapters\u003c\/li\u003e\n\u003cli\u003e20-0460 FPD Adapter 8AN ORB 11mm Bore 42mm Spacing M6 — 8AN ORB to OEM FPD Adapters\u003c\/li\u003e\n\u003cli\u003e20-1459 FPD Adapter 8AN ORB 27mm Bore — 8AN ORB to OEM FPD Adapters\u003c\/li\u003e\n\u003cli\u003e20-0663 8AN ORB to Toyota Pressure Sensor Adapter — 8AN ORB to OEM Sensor Adapters\u003c\/li\u003e\n\u003cli\u003e20-1303 Ford Sensor Adapter 8AN ORB 16mm Bore 41mm Offset Spacing M5 — 8AN ORB to OEM Sensor Adapters\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese anodized billet 6061 aluminum adapter fittings allow an OEM fuel pressure regulator (FPR) or fuel pulse damper (FPD) to be reused in an application other than the OEM fuel rail. All fittings permit the unit to be clocked into the proper position.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0301 FPR Adapter 8AN ORB 11mm Bore 39mm Spacing M6\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0301n_95e4db58-8e4d-46e5-9d87-b834add775b8.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting can adapt to virtually any fuel rail with an 8AN ORB female port and the necessary space around it to allow the FPR to fit. It is threaded M6x1.0mm where is accepts the FPR and has a 39mm hole spacing. Compatible FPR must have an 11mm bore and 39mm mount hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0302 FPR Adapter 8AN ORB 16mm Bore 39mm Spacing M6\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0302n.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting can adapt to virtually any fuel rail with an 8AN ORB female port and the necessary space around it to allow the FPR to fit. It is threaded M6x1.0mm where is accepts the FPR and has a 39mm hole spacing. Compatible FPR must have an 16mm bore and 39mm mount hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0303 FPR Adapter 8AN ORB 11mm Bore 32mm Spacing M5\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0303n.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting can adapt to virtually any fuel rail with an 8AN ORB female port and the necessary space around it to allow the FPR to fit. It is threaded M5x0.8mm where is accepts the FPR and has a 32mm hole spacing. Compatible FPR must have an 11mm bore and 32mm mount hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0595 FPR Adapter 8AN ORB 7mm Bore 39mm Offset M6\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0595.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting can adapt to virtually any fuel rail with an 8AN ORB female port and the necessary space around it to allow the FPR to fit. It is threaded M6x1.0mm where is accepts the FPR and has an offset 39mm hole spacing. Compatible FPR must have an 7mm bore and 39mm mount hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0603 FPR Adapter 8AN ORB 7mm Bore 39mm Spacing M6\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0603.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting can adapt to virtually any fuel rail with an 8AN ORB female port and the necessary space around it to allow the FPR to fit. It is threaded M6x1.0mm where is accepts the FPR and has a 39mm hole spacing. Compatible FPR must have an 7mm bore and 39mm mount hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0842 FPR Adapter 8AN ORB 16mm Bore 50mm Spacing M6\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0842.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting can adapt to virtually any fuel rail with an 8AN ORB female port and the necessary space around it to allow the FPR to fit. It is threaded M6x1.0mm where is accepts the FPR and has a 50mm hole spacing. Compatible FPR must have a 16mm bore and 50mm mount hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e14-0285 8AN ORB to M12x1.25 Female\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/14-0285new.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting is used to adapt any FPR or sensor that is threaded M12x1.25 to an 8AN ORB female port. These metric FPR units should include a sealing washer to use when installing into the fitting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0459 FPD Adapter 8AN ORB 27mm Bore\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0459.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting will adapt OEM pulse dampers commonly used in Nissan applications to an 8AN male thread. This can be installed into any 8AN ORB female port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0460 FPD Adapter 8AN ORB 11mm Bore 42mm Spacing M6\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0460n.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting can adapt to virtually any fuel rail with an 8AN ORB female port and the necessary space around it to allow the FPR to fit. It is threaded M6x1.0mm where is accepts the FPR and has a 42mm hole spacing. Compatible FPR must have an 11mm bore and 42mm mount hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0663 8AN ORB to Toyota Pressure Sensor Adapter\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0663.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eOriginally designed specifically for the 2022+ Toyota Corolla GR, this fitting can adapt to virtually any fuel rail with an 8AN ORB female port. This adapter clamps onto the OEM Toyota pressure sensor used in several Toyota applications with a 9.5mm bore.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1303 Ford Sensor Adapter 8AN ORB 16mm Bore 41mm Offset Spacing M5\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1303.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting can adapt to virtually any fuel rail with an 8AN ORB female port and the necessary space around it to allow the FPR to fit. It is threaded M56x0.8mm where is accepts the FPR and has an offset 41mm hole spacing. Compatible FPR must have a 16mm bore and 41mm mount hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1459 FPD Adapter 8AN ORB 27mm Bore\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0459.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fitting will adapt OEM pulse dampers commonly used in Nissan applications to an 8AN male thread. This can be installed into any 8AN ORB female port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0301 FPR Adapter 8AN ORB 11mm Bore 39mm Spacing M6","offer_id":67591210565905,"sku":"20-0301","price":34.95,"currency_code":"USD","in_stock":true},{"title":"20-0302 FPR Adapter 8AN ORB 16mm Bore 39mm Spacing M6","offer_id":67591210598673,"sku":"20-0302","price":34.95,"currency_code":"USD","in_stock":true},{"title":"20-0303 FPR Adapter 8AN ORB 11mm Bore 32mm Spacing M5","offer_id":67591210631441,"sku":"20-0303","price":34.95,"currency_code":"USD","in_stock":true},{"title":"20-0595 FPR Adapter 8AN ORB 7mm Bore 39mm Offset M6","offer_id":67591210664209,"sku":"20-0595","price":34.95,"currency_code":"USD","in_stock":true},{"title":"20-0603 FPR Adapter 8AN ORB 7mm Bore 39mm Spacing M6","offer_id":67591210696977,"sku":"20-0603","price":34.95,"currency_code":"USD","in_stock":true},{"title":"20-0842 FPR Adapter 8AN ORB 16mm Bore 50mm Spacing M6","offer_id":67591210729745,"sku":"20-0842","price":34.95,"currency_code":"USD","in_stock":true},{"title":"14-0285 FPR Adapter 8AN ORB to M12x1.25 Female","offer_id":67591210762513,"sku":"14-0285","price":14.95,"currency_code":"USD","in_stock":true},{"title":"20-0459 FPD Adapter 8AN ORB 27mm Bore","offer_id":67591210795281,"sku":"20-0459","price":29.95,"currency_code":"USD","in_stock":true},{"title":"20-0460 FPD Adapter 8AN ORB 11mm Bore 42mm Spacing M6","offer_id":67591210828049,"sku":"20-0460","price":34.95,"currency_code":"USD","in_stock":true},{"title":"20-1459 FPD Adapter 8AN ORB 27mm Bore","offer_id":67591210860817,"sku":"20-1459","price":29.95,"currency_code":"USD","in_stock":true},{"title":"20-0663 8AN ORB to Toyota Pressure Sensor Adapter","offer_id":67591210893585,"sku":"20-0663","price":29.95,"currency_code":"USD","in_stock":true},{"title":"20-1303 Ford Sensor Adapter 8AN ORB 16mm Bore 41mm Offset Spacing M5","offer_id":67591210926353,"sku":"20-1303","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0301n_95e4db58-8e4d-46e5-9d87-b834add775b8.jpg?v=1790637912"},{"product_id":"radium-radiator-caps","title":"Radium Radiator Caps — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e18-0076-A11 Radiator Cap Type-A 1.1Bar Black\u003c\/li\u003e\n\u003cli\u003e18-0076-A13 Radiator Cap Type-A 1.3Bar Black\u003c\/li\u003e\n\u003cli\u003e18-0076-A15 Radiator Cap Type-A 1.5Bar Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe radiator cap is an essential part of an upgraded cooling system. Radium caps are engineered to safely improve cooling efficiency by managing the boiling temperature. A higher radiator pressure effectively raises the coolant boiling point, providing an extra safety margin and preventing air pocket cavitation at the water pump.\u003c\/p\u003e\n\u003cp\u003eEach OEM replacement radiator cap is manufactured from stamped stainless steel for durability. All 18-0076-X1X radiator caps are electroplated black. Unlike OEM caps which use natural rubber gaskets, these radiator caps feature premium silicone sealing elements for long lasting durability.\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePRESSURE\u003c\/h3\u003e\n\u003cp\u003eAvailable with 3 different pressure relief springs:\u003c\/p\u003e\n\u003cp\u003e1.1Bar (16.0psi)\u003cbr\u003e1.3Bar (18.9psi)\u003cbr\u003e1.5Bar (21.8psi)\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCAP TYPES\u003c\/h3\u003e\n\u003cp\u003eRadium radiator caps are designed for mini size (32mm ID) radiator necks only. Available in Type-A. We no longer offer Type-B.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease confirm what style your application uses prior to ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNOTE: All Radium Engineering coolant expansion tanks require a Type-A style radiator cap.\u003c\/em\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"18-0076-A11 Radiator Cap Type-A 1.1Bar Black","offer_id":67591210959121,"sku":"18-0076-A11","price":29.95,"currency_code":"USD","in_stock":true},{"title":"18-0076-A13 Radiator Cap Type-A 1.3Bar Black","offer_id":67591210991889,"sku":"18-0076-A13","price":29.95,"currency_code":"USD","in_stock":true},{"title":"18-0076-A15 Radiator Cap Type-A 1.5Bar Black","offer_id":67591211024657,"sku":"18-0076-A15","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/Radiator_Caps-A.jpg?v=1790637913"},{"product_id":"radium-fuel-rails-nissan-vk56de","title":"Radium Fuel Rails, Nissan VK56DE — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-1056 Fuel Rails, Nissan VK56DE — Fuel Rail\u003c\/li\u003e\n\u003cli\u003e20-1056-PK Fuel Rail Plumbing Kit, Nissan VK56DE — Plumbing Kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!--- Begin section ---\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1056 Nissan VK56DE Fuel Rails\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/4193\/7449\/files\/20-1056_1200px_wide.jpg\" style=\"width: 240px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eManufactured with large internal bores, the fuel rails can support all necessary engine power requirements. They are CNC machined from solid 6061 aluminum, black anodized, and laser etched for a high quality surface finish. Like the OEM fuel rails, the injector bores are 14mm ID so factory injectors are permitted. There are provisions for the retaining clips for proper indexing of all OEM fuel injectors. \u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach fuel fail has five 8AN ORB ports (ten total). Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/dmr-ra-direct-mount-regulator\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pulse-damper-direct-mount-kits\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!--- End section ---\u003e\n\u003c!--- Begin section ---\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1056-PK Fuel Rail Plumbing Kit, Nissan VK56DE\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/4193\/7449\/files\/20-1056-PK_1200px_wide.jpg\" style=\"width: 240px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe fuel rail plumbing kit allows for an OEM bolt-on affair. Nothing else is required to fully replace the OEM fuel rail system. All OEM fuel hoses and pulse dampers are reused. The 8AN crossover is manufactured from high quality PTFE hose compatible will all fuel types including E85. Plugs are included for all unused ports.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-1056 Fuel Rails, Nissan VK56DE","offer_id":67591216890129,"sku":"20-1056","price":249.95,"currency_code":"USD","in_stock":true},{"title":"20-1056-PK Fuel Rail Plumbing Kit, Nissan VK56DE","offer_id":67591216922897,"sku":"20-1056-PK","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-1056_1200px_wide.jpg?v=1790637981"},{"product_id":"radium-injector-seats-for-nissan-top-feed-conversion-fuel-rails","title":"Radium Injector Seats for Nissan Top Feed Conversion Fuel Rails — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0160 Nissan Injector Seat 30mm — Selection\u003c\/li\u003e\n\u003cli\u003e20-0161 Nissan Injector Seat 25mm — Selection\u003c\/li\u003e\n\u003cli\u003eNissan 25mm Injector Seat O-ring Service Kit — O-ring Service Kits\u003c\/li\u003e\n\u003cli\u003eNissan 30mm Injector Seat O-ring Service Kit — O-ring Service Kits\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese are the same machined aluminum injector seats used in Radium fuel rail kits. They are required when converting an OEM side feed injector to a top feed injector that uses a 14mm lower O-ring. They simply 'pop' into the intake manifold (1 required per injector). They seal to the machined injector counterbore using the included FKM O-ring. \u003cbr\u003e\u003cbr\u003e\u003cem\u003eNOTE: Because they are compatible with different cylinder engines, the injector seats are sold individually (not a set). Change quantity accordingly.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0160 NISSAN INJECTOR SEAT, 30MM\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0160.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eAll 30mm injector seats are black anodized.\u003c\/p\u003e\n\u003cp\u003eThe injector seats are CNC machined with a common 14mm bore for the lower injector O-ring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0161 NISSAN INJECTOR SEAT, 25MM\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0161.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eAll 25mm injector seats are Radium green anodized.\u003c\/p\u003e\n\u003cp\u003eThe injector seats are CNC machined with a common 14mm bore for the lower injector O-ring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0160 Nissan Injector Seat 30mm","offer_id":67591216955665,"sku":"20-0160","price":14.95,"currency_code":"USD","in_stock":true},{"title":"20-0161 Nissan Injector Seat 25mm","offer_id":67591216988433,"sku":"20-0161","price":14.95,"currency_code":"USD","in_stock":true},{"title":"Nissan 25mm Injector Seat O-ring Service Kit","offer_id":67591217021201,"sku":"20-0947","price":9.95,"currency_code":"USD","in_stock":true},{"title":"Nissan 30mm Injector Seat O-ring Service Kit","offer_id":67591217053969,"sku":"20-0948","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/Nissan_Inj_Seats.jpg?v=1790637982"},{"product_id":"radium-spring-lock-fittings","title":"Radium Spring Lock Fittings — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer backorder:\u003c\/strong\u003e 14-0766. Contact us for availability before ordering these parts.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e14-0766 6AN Male to 3\/8in Spring Lock Female\u003c\/li\u003e\n\u003cli\u003e14-0767 8AN Male to 1\/2in Spring Lock Female\u003c\/li\u003e\n\u003cli\u003e20-1766 6AN Male to 3\/8in Spring Lock Male\u003c\/li\u003e\n\u003cli\u003e20-1767 8AN Male to 1\/2in Spring Lock Male\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese fittings are machined from 6061 aluminum and anodized for corrosion resistance. The integrated O-rings are FKM making the fittings compatible with gasoline and alcohol fuels, such as E85.\u003c\/p\u003e\n\u003cp\u003eFor separating, a Spring-Lock disconnect tool is required. Slide the tool along the female fitting and push it into the male fitting. While holding the inserted tool in place, an internal spring releases the lock and the fittings can be disengaged.\u003c\/p\u003e\n\u003cp\u003eWhen making the connection, first be sure the O-rings on the male fitting are well lubricated. Simply insert the male fitting into the female fitting until an audible \"click\" is heard. To confirm they have properly locked together, apply tension to the connection by giving it a tug. \u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e14-0766 6AN Male to 3\/8in Spring Lock Female\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/14-0766.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eConverts a 3\/8\" male spring lock line to 6AN male\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1766 6AN Male to 3\/8in Spring Lock Male\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1766.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eConverts a 3\/8\" female spring lock line to 6AN male\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e14-0767 8AN Male to 1\/2in Spring Lock Female\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/14-0767_1200px_wide_9c6f0d6a-6871-4767-84fe-9c301c006726.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eConverts a 1\/2\" male spring lock line to 8AN male\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1767 8AN Male to 1\/2in Spring Lock Male\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1767.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eConverts a 1\/2\" female spring lock line to 8AN male\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"14-0766 6AN Male to 3\/8in Spring Lock Female","offer_id":67591217086737,"sku":"14-0766","price":19.95,"currency_code":"USD","in_stock":true},{"title":"14-0767 8AN Male to 1\/2in Spring Lock Female","offer_id":67591217119505,"sku":"14-0767","price":19.95,"currency_code":"USD","in_stock":true},{"title":"20-1766 6AN Male to 3\/8in Spring Lock Male","offer_id":67591217152273,"sku":"20-1766","price":34.95,"currency_code":"USD","in_stock":true},{"title":"20-1767 8AN Male to 1\/2in Spring Lock Male","offer_id":67591217185041,"sku":"20-1767","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/Spring_Lock_Compilation.jpg?v=1790637982"},{"product_id":"radium-fuel-pump-access-cover-nissan-s13-r32","title":"Radium Fuel Pump Access Cover, Nissan S13, R32","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0735 Fuel Pump Access Cover Nissan S13 R32\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThese fuel pump access covers are a direct replacement for the factory steel plates. They simply shield and protect the fuel pump module.\u003c\/p\u003e\n","brand":"Radium Engineering","offers":[{"title":"20-0735 Fuel Pump Access Cover Nissan S13 R32","offer_id":67591217217809,"sku":"20-0735","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0735.jpg?v=1790637983"},{"product_id":"radium-catch-can-kits-350z-fairlady-g35-skyline","title":"Radium Catch Can Kits, 350Z, Fairlady, G35, Skyline","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0728-FL PCV Catch Can Kit, Nissan Z33 V35 VQ35DE\u003c\/li\u003e\n\u003cli\u003e20-0729-FL Dual Catch Can Kit, Nissan V35 VQ35DE\/HR\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe catch can draws out oil and water condensation from the crankcase gasses that would otherwise be drawn into the intake manifold. This prevents oil buildup in the intake, intercooler system walls, throttle body, and intake manifold. This effectively raises the octane, can increase engine performance from cleaner inlet air, and can lower hydrocarbon emissions. The closed system prevents unwanted oil vapors from entering into the cabin. Catch can kits include everything needed for a complete installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFLUID LOCK® CATCH CANS\u003c\/h3\u003e\n\u003cp\u003eIn 2022, Radium Engineering implemented a revolutionary design change to the 7 fluid ounce standard catch can. An inherent problem always existed with typical catch cans when not serviced regularly. The fluid contaminants will eventually leave the reservoir pouring into the air intake system causing poor engine performance. To resolve this issue, Radium created the Fluid Lock® Catch Can. This contains a patented mechanism that prevents the reservoir from overfilling and traps the collected fluids until it is emptied.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/FL3_a_Internals.jpg\" style=\"width: 240px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCOLLECTION \u0026amp; EMPTYING\u003c\/h3\u003e\n\u003cp\u003eThe rate that your catch cans will collect oil and moisture contaminants will vary from one individual vehicle to the next, so there is no set emptying interval. PCV catch cans tend to collect more than CCV catch cans. You should check the level of your catch can using the integrated dipstick starting at 3-4 weeks of driving and repeat as needed to determine how often they should be emptied based on what you see.\u003c\/p\u003e\n\u003cp\u003eCatch cans can be emptied by unscrewing the lower reservoir and removing it from the vehicle to dump out, or in cases where there is available space under the catch can, the \u003ca href=\"https:\/\/www.radiumauto.com\/products\/catch-can-petcock-drain-kit\"\u003ePetcock Drain Kit\u003c\/a\u003e can be installed and used to drain them.\u003c\/p\u003e\n\u003cp\u003eIn cases where oil collection is excessive you may have to address an issue with the engine. The reasons a catch can will collect an excess of oil include\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcessive blowby from engine damage\u003c\/li\u003e\n\u003cli\u003eCrankcase windage from an over-full oil level\u003c\/li\u003e\n\u003cli\u003ePoor placement of breather ports and\/or poor baffling inside breather ports\u003c\/li\u003e\n\u003cli\u003ePCV valve not closing and leaking under heavy load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0728-FL PCV CATCH CAN KIT, NISSAN Z33 V35, VQ35DE\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0728-FL.jpg\" style=\"width: 200px;\" class=\"myImages\" id=\"myImg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe PCV catch can kit runs inline between the PCV valve and the intake manifold. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV valve closes and this hose experiences no flow. The PCV hoses will experience metered vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. No inline check valve is required since Radium catch cans are pressure sealed. This means a direct intake manifold connection is permitted.\u003c\/p\u003e\n\u003cp\u003eThe catch can mounts to the OEM power steering reservoir bracket. This kit traps unwanted \"metered\" crankcase vapor, unspent fuel, and oil sludge. It promotes clean filtered air back into the intake manifold.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0729-FL DUAL CATCH CAN KIT, NISSAN V35, VQ35DE\/HR\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0729-FL.jpg\" style=\"width: 200px;\" class=\"myImages\" id=\"myImg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe dual catch can consists of a PCV and a CCV catch can. The dual catch can bracket mounts in the front LH portion of the engine bay and is NOT compatible with the factory air box.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can runs inline between the PCV valve and the intake pipe. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV valve closes and this hoses experience no flow. The PCV hoses will experience metered vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. No inline check valve is required since Radium catch cans are pressure sealed. This means a direct intake manifold connection is permitted.\u003c\/p\u003e\n\u003cp\u003eThe CCV catch can runs inline between the crankcase vent (CCV) port and the intake pipe. At low loads, it experiences atmospheric pressure. However, when the engine is at high load (WOT), the line will experience high flow from the crankcase into the intake system. This would normally lead to oil and sludge accumulation in the air filter intake pipe. The CCV catch can captures this and promotes clean filtered air back into the intake.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0728-FL PCV Catch Can Kit, Nissan Z33 V35 VQ35DE","offer_id":67591217250577,"sku":"20-0728-FL","price":209.95,"currency_code":"USD","in_stock":true},{"title":"20-0729-FL Dual Catch Can Kit, Nissan V35 VQ35DE\/HR","offer_id":67591217283345,"sku":"20-0729-FL","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0728-FL.jpg?v=1790637983"},{"product_id":"radium-catch-can-kits-nissan-r35-gt-r","title":"Radium Catch Can Kits, Nissan R35 GT-R","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0565-FL PCV Catch Can Kit, Nissan R35 GT-R\u003c\/li\u003e\n\u003cli\u003e20-0555-FL Dual CCV Catch Can Kit, Nissan R35 GT-R\u003c\/li\u003e\n\u003cli\u003e20-0566-FL Triple Catch Can Kit, Nissan R35 GT-R\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe catch can draws out oil and water condensation from the crankcase gasses that would otherwise be drawn into the intake manifold. This prevents oil buildup in the intake, intercooler system walls, throttle body, and intake manifold. This effectively raises the octane, can increase engine performance from cleaner inlet air, and can lower hydrocarbon emissions. The closed system prevents unwanted oil vapors from entering into the cabin. Catch can kits include everything needed for a complete installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFLUID LOCK® CATCH CANS\u003c\/h3\u003e\n\u003cp\u003eIn 2022, Radium Engineering implemented a revolutionary design change to the 7 fluid ounce standard catch can. An inherent problem always existed with typical catch cans when not serviced regularly. The fluid contaminants will eventually leave the reservoir pouring into the air intake system causing poor engine performance. To resolve this issue, Radium created the Fluid Lock® Catch Can. This contains a patented mechanism that prevents the reservoir from overfilling and traps the collected fluids until it is emptied.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 240px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/FL3_a_Internals.jpg\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCOLLECTION \u0026amp; EMPTYING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe rate that your catch cans will collect oil and moisture contaminants will vary from one individual vehicle to the next, so there is no set emptying interval. PCV catch cans tend to collect more than CCV catch cans. You should check the level of your catch can using the integrated dipstick starting at 3-4 weeks of driving and repeat as needed to determine how often they should be emptied based on what you see.\u003c\/p\u003e\n\u003cp\u003eCatch cans can be emptied by unscrewing the lower reservoir and removing it from the vehicle to dump out, or in cases where there is available space under the catch can, the \u003ca href=\"https:\/\/www.radiumauto.com\/products\/catch-can-petcock-drain-kit\"\u003ePetcock Drain Kit\u003c\/a\u003e can be installed and used to drain them.\u003c\/p\u003e\n\u003cp\u003eIn cases where oil collection is excessive you may have to address an issue with the engine. The reasons a catch can will collect an excess of oil include\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcessive blowby from engine damage\u003c\/li\u003e\n\u003cli\u003eCrankcase windage from an over-full oil level\u003c\/li\u003e\n\u003cli\u003ePoor placement of breather ports and\/or poor baffling inside breather ports\u003c\/li\u003e\n\u003cli\u003ePCV valve not closing and leaking under heavy load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003ePRODUCT VIDEO\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/VvdfgaJfLwQ\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: This video shows the green banjo bolt style fittings which have been discontinued and replaced with swiveling stainless steel versions.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0565-FL Catch Can Kit PCV Nissan R35 GT-R\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0565-FLnew.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe PCV kit mounts near the brake master cylinder in the back of the engine bay and interfaces with the hose that goes from the PCV valve on the engine to the intake manifold (vacuum).\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can kit runs inline between the PCV valve and the intake manifold. It mounts in the LH side engine compartment. \u003cbr\u003e\u003cbr\u003eWhen the intake manifold pressure is close to or greater than atmospheric pressure, the PCV \"check\" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hoses will experience \"metered\" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run.  This catch can will intercept the oil and other blow-by liquids and prevent them from entering the intake manifold. The catch can must be emptied periodically.\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe PCV kit is NOT directly compatible with 08-11 GT-Rs which did not have an OEM strut bar\u003c\/li\u003e\n\u003cli\u003eThe PCV kit is compatible and recommended to be used with the dual CCV catch can kit. See 20-0566 -FL below\u003c\/li\u003e\n\u003cli\u003eNo inline check valve is required since Radium catch cans are pressure sealed. This means a direct intake manifold connection is permitted\u003c\/li\u003e\n\u003cli\u003eFor RHD vehicles, some modifications may be required for catch can mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0555-FL Dual Catch Can Kit CCV Nissan R35 GT-R\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0555-FLnew.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eTo retain factory functionality, the two CCV catch cans run inline between each crankcase vent (CCV) port and the corresponding turbo inlets.\u003c\/p\u003e\n\u003cp\u003eThe 20-0555 crankcase vent kit mounts on the front of the engine and interfaces with the breather lines coming off of the heads and going to the turbo intake piping. This kit contains two catch cans (one for each head breather).\u003c\/p\u003e\n\u003cp\u003eWhen deciding which kit (or kits) to purchase, it is important to remember that both kits working together offer the most protection from oil ingestion into the engine. The PCV side kit is effective at keeping oil out of the intake manifold when the PCV valve is open, such as during light cruising, idle, etc.  When in boost, the PCV valve closes and all the engine blow-by comes out of the head breathers. This is a good reason to have catch cans on the crankcase breathers.\u003c\/p\u003e\n\u003cp\u003eAt low loads, these catch cans experience atmospheric pressure. However, when the engine is at high load (WOT), these vents will experience high flow out of the crankcase. This would normally lead to oil and sludge accumulation in the air filter intake pipe. Oil accumulation will occur in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe dual CCV catch can kit does NOT address blow-by from the PCV valve side of the crankcase.\u003c\/li\u003e\n\u003cli\u003eThe dual CCV catch can kit is compatible and recommended to be used with the PCV catch can kit. See 20-0566-FL below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0566-FL Triple Catch Can Kit Nissan R35 GT-R\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0566-FLnew.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eFor the ultimate in engine protection, Radium recommends 20-0566-FL Triple Catch Can Kit, Nissan R35 GT-R.  \u003c\/p\u003e\n\u003cp\u003eThis kit utilizes both the dual CCV and single PCV catch can kits detailed above.\u003cbr\u003e\u003cem\u003e\u003cbr\u003eNOTE: \u003c\/em\u003e\u003cem\u003eFor RHD vehicles, some modifications may be required for PCV catch can mounting.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0565-FL PCV Catch Can Kit, Nissan R35 GT-R","offer_id":67591217316113,"sku":"20-0565-FL","price":209.95,"currency_code":"USD","in_stock":true},{"title":"20-0555-FL Dual CCV Catch Can Kit, Nissan R35 GT-R","offer_id":67591217348881,"sku":"20-0555-FL","price":409.95,"currency_code":"USD","in_stock":true},{"title":"20-0566-FL Triple Catch Can Kit, Nissan R35 GT-R","offer_id":67591217381649,"sku":"20-0566-FL","price":609.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0566-FLnew.jpg?v=1790637984"},{"product_id":"radium-catch-can-kits-nissan-s13","title":"Radium Catch Can Kits, Nissan S13","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0725-FL PCV Catch Can Kit, Nissan S13\u003c\/li\u003e\n\u003cli\u003e20-0726-FL CCV Catch Can Kit, Nissan S13\u003c\/li\u003e\n\u003cli\u003e20-0727-FL Dual Catch Can Kit, Nissan S13\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe catch can draws out oil and water condensation from the crankcase gasses that would otherwise be drawn into the intake manifold. This prevents oil buildup in the intake, intercooler system walls, throttle body, and intake manifold. This effectively raises the octane, can increase engine performance from cleaner inlet air, and can lower hydrocarbon emissions. The closed system prevents unwanted oil vapors from entering into the cabin. Catch can kits include everything needed for a complete installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFLUID LOCK® CATCH CANS\u003c\/h3\u003e\n\u003cp\u003eIn 2022, Radium Engineering implemented a revolutionary design change to the 7 fluid ounce standard catch can. An inherent problem always existed with typical catch cans when not serviced regularly. The fluid contaminants will eventually leave the reservoir pouring into the air intake system causing poor engine performance. To resolve this issue, Radium created the Fluid Lock® Catch Can. This contains a patented mechanism that prevents the reservoir from overfilling and traps the collected fluids until it is emptied.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 240px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/FL3_a_Internals.jpg\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCOLLECTION \u0026amp; EMPTYING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe rate that your catch cans will collect oil and moisture contaminants will vary from one individual vehicle to the next, so there is no set emptying interval. PCV catch cans tend to collect more than CCV catch cans. You should check the level of your catch can using the integrated dipstick starting at 3-4 weeks of driving and repeat as needed to determine how often they should be emptied based on what you see.\u003c\/p\u003e\n\u003cp\u003eCatch cans can be emptied by unscrewing the lower reservoir and removing it from the vehicle to dump out, or in cases where there is available space under the catch can, the \u003ca href=\"https:\/\/www.radiumauto.com\/products\/catch-can-petcock-drain-kit\"\u003ePetcock Drain Kit\u003c\/a\u003e can be installed and used to drain them.\u003c\/p\u003e\n\u003cp\u003eIn cases where oil collection is excessive you may have to address an issue with the engine. The reasons a catch can will collect an excess of oil include\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcessive blowby from engine damage\u003c\/li\u003e\n\u003cli\u003eCrankcase windage from an over-full oil level\u003c\/li\u003e\n\u003cli\u003ePoor placement of breather ports and\/or poor baffling inside breather ports\u003c\/li\u003e\n\u003cli\u003ePCV valve not closing and leaking under heavy load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0725-FL Catch Can Kit PCV Nissan S13\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0725-FL.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe PCV catch can kit runs inline between the PCV valve and the intake manifold. It mounts to threaded bosses on the RH strut tower just clear of the fuel filter.\u003c\/p\u003e\n\u003cp\u003eWhen the intake manifold pressure is close to or greater than atmospheric pressure, the PCV valve closes and this hose experiences no flow. The PCV hoses will experience metered vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe PCV catch can kit is compatible and recommended to be used with the CCV catch can kit. See 20-0726 below.\u003c\/li\u003e\n\u003cli\u003eNo extra inline check valve is required since Radium catch cans are pressure sealed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0726-FL Catch Can Kit CCV Nissan S13\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0726-FL.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe CCV catch can mounts to 2 holes in the LH side of the unibody near the firewall. It was designed specifically to clear the windshield wiper motor (RHD) and the master cylinders (LHD).\u003c\/p\u003e\n\u003cp\u003eTo retain factory functionality, the CCV catch can runs inline between the crankcase vent (CCV) port and the intake pipe. At low loads, it experiences atmospheric pressure. However, when the engine is at high load (WOT), the line will experience high flow from the crankcase into the intake system. This would normally lead to oil and sludge accumulation in the air filter intake pipe. This oil accumulation would spread and be found in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance. The CCV catch can captures this and promotes clean filtered air back into the intake.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNOTES:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe CCV catch can kit does NOT address blow-by from the PCV valve side of the crankcase.\u003c\/li\u003e\n\u003cli\u003eThe CCV catch can kit is compatible and recommended to be used with the PCV catch can kit. See 20-0725 above.\u003c\/li\u003e\n\u003cli\u003eThe kit is designed to connect the provided hose to the OEM valve cover barb. However, an add-on a la carte option (not included) for the SR20DET is outlined below. Nothing else is required.\u003cbr\u003e1x \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Swivel-Press-In-Fittings-Nissan-Valve-Covers\"\u003e20-0811 10AN Press-In Fitting\u003c\/a\u003e\u003cbr\u003e1x \u003ca href=\"https:\/\/www.radiumauto.com\/products\/PushLok-Hose-Ends\"\u003e14-0215 10AN Hose End, 180deg\u003c\/a\u003e\u003cbr\u003e1x \u003ca href=\"https:\/\/www.radiumauto.com\/products\/PushLok-Hose-Ends\"\u003e14-0211 10AN Hose End, Straight\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0727-FL Dual Catch Can Kit Nissan S13\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0727-FL.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eFor the ultimate in engine protection, Radium recommends Dual Catch Can Kit. This kit utilizes both the PCV and CCV catch can kits detailed above.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0725-FL PCV Catch Can Kit, Nissan S13","offer_id":67591217414417,"sku":"20-0725-FL","price":229.95,"currency_code":"USD","in_stock":true},{"title":"20-0726-FL CCV Catch Can Kit, Nissan S13","offer_id":67591217447185,"sku":"20-0726-FL","price":239.95,"currency_code":"USD","in_stock":true},{"title":"20-0727-FL Dual Catch Can Kit, Nissan S13","offer_id":67591217479953,"sku":"20-0727-FL","price":459.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0727-FL.jpg?v=1790637985"},{"product_id":"radium-catch-can-kits-nissan-s15-silvia-200sx","title":"Radium Catch Can Kits, Nissan S15 Silvia\/200SX","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0635-FL PCV Catch Can Kit, Nissan S15 Silvia\/200SX\u003c\/li\u003e\n\u003cli\u003e20-0636-FL Catch Can Kit CCV Nissan S15 Silvia\/200SX Fluid Lock\u003c\/li\u003e\n\u003cli\u003e20-0637-FL Dual Catch Can Kit, Nissan S15 Silvia\/200SX\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe catch can draws out oil and water condensation from the crankcase gasses that would otherwise be drawn into the intake manifold. This prevents oil buildup in the intake, intercooler system walls, throttle body, and intake manifold. This effectively raises the octane, can increase engine performance from cleaner inlet air, and can lower hydrocarbon emissions. The closed system prevents unwanted oil vapors from entering into the cabin. Catch can kits include everything needed for a complete installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFLUID LOCK® CATCH CANS\u003c\/h3\u003e\n\u003cp\u003eIn 2022, Radium Engineering implemented a revolutionary design change to the 7 fluid ounce standard catch can. An inherent problem always existed with typical catch cans when not serviced regularly. The fluid contaminants will eventually leave the reservoir pouring into the air intake system causing poor engine performance. To resolve this issue, Radium created the Fluid Lock® Catch Can. This contains a patented mechanism that prevents the reservoir from overfilling and traps the collected fluids until it is emptied.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/FL3_a_Internals.jpg\" style=\"width: 240px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCOLLECTION \u0026amp; EMPTYING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe rate that your catch cans will collect oil and moisture contaminants will vary from one individual vehicle to the next, so there is no set emptying interval. PCV catch cans tend to collect more than CCV catch cans. You should check the level of your catch can using the integrated dipstick starting at 3-4 weeks of driving and repeat as needed to determine how often they should be emptied based on what you see.\u003c\/p\u003e\n\u003cp\u003eCatch cans can be emptied by unscrewing the lower reservoir and removing it from the vehicle to dump out, or in cases where there is available space under the catch can, the \u003ca href=\"https:\/\/www.radiumauto.com\/products\/catch-can-petcock-drain-kit\"\u003ePetcock Drain Kit\u003c\/a\u003e can be installed and used to drain them.\u003c\/p\u003e\n\u003cp\u003eIn cases where oil collection is excessive you may have to address an issue with the engine. The reasons a catch can will collect an excess of oil include\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcessive blowby from engine damage\u003c\/li\u003e\n\u003cli\u003eCrankcase windage from an over-full oil level\u003c\/li\u003e\n\u003cli\u003ePoor placement of breather ports and\/or poor baffling inside breather ports\u003c\/li\u003e\n\u003cli\u003ePCV valve not closing and leaking under heavy load \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0635-FL Catch Can Kit PCV Nissan S15 Silvia\/200SX\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0635-FL.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe PCV catch can kit runs inline between the PCV valve and the intake manifold. It mounts to 3 OEM threaded bosses in the RH corner near the firewall.\u003c\/p\u003e\n\u003cp\u003eWhen the intake manifold pressure is close to or greater than atmospheric pressure, the PCV \"check\" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hoses will experience \"metered\" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe PCV catch can kit is compatible and recommended to be used with the CCV catch can kit. See 20-0636 below.\u003c\/li\u003e\n\u003cli\u003eNo extra inline check valve is required since Radium catch cans are pressure sealed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0636-FL Catch Can Kit CCV Nissan S15 Silvia\/200SX\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0636-FL.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe CCV catch can mounts to 2 of the wiper blade motor mounts.\u003c\/p\u003e\n\u003cp\u003eTo retain factory functionality, the CCV catch can runs inline between the crankcase vent (CCV) port and the intake pipe. At low loads, it experiences atmospheric pressure. However, when the engine is at high load (WOT), the line will experience high flow from the crankcase into the intake system. This would normally lead to oil and sludge accumulation in the air filter intake pipe. This oil accumulation would spread and be found in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance. The CCV catch can captures this and promotes clean filtered air back into the intake.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe CCV catch can kit does NOT address blow-by from the PCV valve side of the crankcase.\u003c\/li\u003e\n\u003cli\u003eThe CCV catch can kit is compatible and recommended to be used with the PCV catch can kit. See 20-0635 above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0637-FL Dual Catch Can Kit Nissan S15 Silvia\/200SX\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0637-FL.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eFor the ultimate in engine protection, Radium recommends 20-0637 Dual Catch Can Kit, Nissan S15 Silvia\/200SX. This kit utilizes both the PCV and CCV catch can kits detailed above.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0635-FL PCV Catch Can Kit, Nissan S15 Silvia\/200SX","offer_id":67591217512721,"sku":"20-0635-FL","price":229.95,"currency_code":"USD","in_stock":true},{"title":"20-0636-FL Catch Can Kit CCV Nissan S15 Silvia\/200SX Fluid Lock","offer_id":67591217545489,"sku":"20-0636-FL","price":229.95,"currency_code":"USD","in_stock":true},{"title":"20-0637-FL Dual Catch Can Kit, Nissan S15 Silvia\/200SX","offer_id":67591217578257,"sku":"20-0637-FL","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0637-FL.jpg?v=1790637993"},{"product_id":"radium-coolant-tank-kit-nissan-r35-gt-r","title":"Radium Coolant Tank Kit, Nissan R35 GT-R — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0557 Coolant Tank Kit Nissan R35 GT-R — Selection\u003c\/li\u003e\n\u003cli\u003e18-0076-A11 Radiator Cap Type-A 1.1Bar Black — Radium Cap\u003c\/li\u003e\n\u003cli\u003e18-0076-A13 Radiator Cap Type-A 1.3Bar Black — Radium Cap\u003c\/li\u003e\n\u003cli\u003e18-0076-A15 Radiator Cap Type-A 1.5Bar Black — Radium Cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBecause of continuous and intense heat cycling, plastic coolant tanks have a reputation of failing over time. Fortunately, the rugged 2-piece Radium Engineering replacement is CNC machined from aluminum and anodized for increased longevity. And because aluminum is a superior thermal conductor material, heat transfer is further improved. Additionally, the metal construction is robust enough to use in racing applications.\u003c\/p\u003e\n\u003cp\u003eThis kit directly replaces the plastic Nissan tank without making permanent modifications to the vehicle. A specially designed mounting bracket secures to existing threaded holes and adapter fittings interface with the factory lines. The tank functionality remains the same as the OEM cooling system. The reduced size allows more room in the engine bay for other modifications and easier access to the engine for servicing.\u003c\/p\u003e\n\u003cp\u003eThe Radium Engineering Coolant Expansion Tank has proven itself over the years in many applications all over the world, in race and street vehicles. The internal design features two chambers with cross-over passages at the top and bottom. The coolant tank also has an internal swirl feature aiding in de-aerating the system.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eINDEPENDENT INSTALL AND REVIEW\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/motoiq.com\/project-dba-r35-nissan-gt-r-adding-a-radium-coolant-tank\/\" target=\"_blank\"\u003eClick here for an 3rd party review and installation\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePRODUCT VIDEO\u003c\/h3\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dGhyTgTKRA0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003chr\u003e\n\u003ch3\u003ePRESSURE CAP\u003c\/h3\u003e\n\u003cp\u003eThe OEM 1.37 Bar Nissan pressure cap can be re-used. Alternatively, various pressure reliefs of the Radium Engineering Type-A cap can be used. \u003c\/p\u003e\n\u003cp\u003eTo select a Radium Engineering cap, use the check boxes above. More info on the caps \u003ca href=\"https:\/\/www.radiumauto.com\/products\/radiator-caps\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0557 Coolant Tank Kit Nissan R35 GT-R","offer_id":67591217611025,"sku":"20-0557","price":399.95,"currency_code":"USD","in_stock":true},{"title":"18-0076-A11 Radiator Cap Type-A 1.1Bar Black","offer_id":67591217643793,"sku":"18-0076-A11","price":29.95,"currency_code":"USD","in_stock":true},{"title":"18-0076-A13 Radiator Cap Type-A 1.3Bar Black","offer_id":67591217676561,"sku":"18-0076-A13","price":29.95,"currency_code":"USD","in_stock":true},{"title":"18-0076-A15 Radiator Cap Type-A 1.5Bar Black","offer_id":67591217709329,"sku":"18-0076-A15","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0557_R35_Coolant_Tank.jpg?v=1790637993"},{"product_id":"radium-dual-catch-can-kit-nissan-370z-g37","title":"Radium Catch Can Kits, Nissan 370Z\/G37","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0525-FL Dual Catch Can Kit, Nissan 370Z\/G37\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe catch can draws out oil and water condensation from the crankcase gasses that would otherwise be drawn into the intake manifold. This prevents oil buildup in the intake, intercooler system walls, throttle body, and intake manifold. This effectively raises the octane, can increase engine performance from cleaner inlet air, and can lower hydrocarbon emissions. The closed system prevents unwanted oil vapors from entering into the cabin. Catch can kits include everything needed for a complete installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFLUID LOCK® CATCH CANS\u003c\/h3\u003e\n\u003cp\u003eIn 2022, Radium Engineering implemented a revolutionary design change to the 7 fluid ounce standard catch can. An inherent problem always existed with typical catch cans when not serviced regularly. The fluid contaminants will eventually leave the reservoir pouring into the air intake system causing poor engine performance. To resolve this issue, Radium created the Fluid Lock® Catch Can. This contains a patented mechanism that prevents the reservoir from overfilling and traps the collected fluids until it is emptied.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/FL3_a_Internals.jpg\" style=\"width:240px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCOLLECTION \u0026amp; EMPTYING\u003c\/h3\u003e\n\u003cp\u003eThe rate that your catch cans will collect oil and moisture contaminants will vary from one individual vehicle to the next, so there is no set emptying interval. PCV catch cans tend to collect more than CCV catch cans. You should check the level of your catch can using the integrated dipstick starting at 3-4 weeks of driving and repeat as needed to determine how often they should be emptied based on what you see.\u003c\/p\u003e\n\u003cp\u003eCatch cans can be emptied by unscrewing the lower reservoir and removing it from the vehicle to dump out, or in cases where there is available space under the catch can, the \u003ca href=\"https:\/\/www.radiumauto.com\/products\/catch-can-petcock-drain-kit\"\u003ePetcock Drain Kit\u003c\/a\u003e can be installed and used to drain them.\u003c\/p\u003e\n\u003cp\u003eIn cases where oil collection is excessive you may have to address an issue with the engine. The reasons a catch can will collect an excess of oil include\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcessive blowby from engine damage\u003c\/li\u003e\n\u003cli\u003eCrankcase windage from an over-full oil level\u003c\/li\u003e\n\u003cli\u003ePoor placement of breather ports and\/or poor baffling inside breather ports\u003c\/li\u003e\n\u003cli\u003ePCV valve not closing and leaking under heavy load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e20-0525-FL Dual Catch Can Kit Nissan 370Z\/G37\u003c\/h3\u003e\n\u003cp\u003eTo keep the symmetry that Nissan designed into the VQ37VHR engine bay, the catch cans secure to the RH strut tower and LH strut tower. No permanent modifications are required. The two oil catch cans run inline with the twin PCV valves integrated into the valve covers retaining factory functionality. \u003c\/p\u003e\n\u003cp\u003eWhen the intake manifold pressure is close to or greater than atmospheric pressure, the PCV \"check\" valves close and, thus, these hoses experience no flow. Conversely, the PCV hoses will experience \"metered\" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNOTE: No inline check valve is required since Radium catch cans are pressure sealed. This means a direct intake manifold connection is permitted.\u003c\/em\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0525-FL Dual Catch Can Kit, Nissan 370Z\/G37","offer_id":67591217742097,"sku":"20-0525-FL","price":469.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0525-FLnew.jpg?v=1790637994"},{"product_id":"radium-dual-catch-can-kit-nissan-r32-skyline-gt-r","title":"Radium Catch Can Kits, Nissan R32 Skyline GT-R","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0590-FL Dual Catch Can Kit, R32 Skyline GT-R\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe catch can draws out oil and water condensation from the crankcase gasses that would otherwise be drawn into the intake manifold. This prevents oil buildup in the intake, intercooler system walls, throttle body, and intake manifold. This effectively raises the octane, can increase engine performance from cleaner inlet air, and can lower hydrocarbon emissions. The closed system prevents unwanted oil vapors from entering into the cabin. Catch can kits include everything needed for a complete installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFLUID LOCK® CATCH CANS\u003c\/h3\u003e\n\u003cp\u003eIn 2022, Radium Engineering implemented a revolutionary design change to the 7 fluid ounce standard catch can. An inherent problem always existed with typical catch cans when not serviced regularly. The fluid contaminants will eventually leave the reservoir pouring into the air intake system causing poor engine performance. To resolve this issue, Radium created the Fluid Lock® Catch Can. This contains a patented mechanism that prevents the reservoir from overfilling and traps the collected fluids until it is emptied.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/FL3_a_Internals.jpg\" style=\"width: 240px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCOLLECTION \u0026amp; EMPTYING\u003c\/h3\u003e\n\u003cp\u003eThe rate that your catch cans will collect oil and moisture contaminants will vary from one individual vehicle to the next, so there is no set emptying interval. PCV catch cans tend to collect more than CCV catch cans. You should check the level of your catch can using the integrated dipstick starting at 3-4 weeks of driving and repeat as needed to determine how often they should be emptied based on what you see.\u003c\/p\u003e\n\u003cp\u003eCatch cans can be emptied by unscrewing the lower reservoir and removing it from the vehicle to dump out, or in cases where there is available space under the catch can, the \u003ca href=\"https:\/\/www.radiumauto.com\/products\/catch-can-petcock-drain-kit\"\u003ePetcock Drain Kit\u003c\/a\u003e can be installed and used to drain them.\u003c\/p\u003e\n\u003cp\u003eIn cases where oil collection is excessive you may have to address an issue with the engine. The reasons a catch can will collect an excess of oil include\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcessive blowby from engine damage\u003c\/li\u003e\n\u003cli\u003eCrankcase windage from an over-full oil level\u003c\/li\u003e\n\u003cli\u003ePoor placement of breather ports and\/or poor baffling inside breather ports\u003c\/li\u003e\n\u003cli\u003ePCV valve not closing and leaking under heavy load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e20-0590-FL Dual Catch Can Kit Nissan R32 Skyline GT-R\u003c\/h3\u003e\n\u003cp\u003eThis Radium Engineering dual catch can kit is designed specifically for the RB26DETT. Careful measure and considerations were put forth to make this a proper system. It retains a true PCV system and includes catch cans for both the PCV valve side and and crankcase vent (CCV) side of the ventilation system. The catch cans do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eTwo double-ended press-in fittings are provided to replace the crankcase vents on the valve covers. In addition, this system balances the intake and exhaust side of the crankcase with a large 10AN crossover hose exactly how the Nissan engineers intended (shown below). \u003c\/p\u003e\n\u003cp\u003eThese SAE quick connect fittings are lightweight, streamline, and simple to install and service.\u003c\/p\u003e\n\u003cp\u003eThey mount using factory holes and integrate perfectly with the surrounding components. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No extra inline check valve is required since Radium catch cans are pressure sealed.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003ePCV CATCH CAN\u003c\/h4\u003e\n\u003cp\u003eThe PCV catch can mounts to threaded bosses on the front RH strut tower. It runs inline between the crankcase vents found on the valve cover and the PCV valve on the vacuum chamber. Large 5\/8\" hose and 10AN fittings are provided for both ends of the catch can.\u003c\/p\u003e\n\u003cp\u003eWhen the intake manifold pressure is close to or greater than atmospheric pressure, the PCV \"check\" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hoses will experience \"metered\" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run.\u003c\/p\u003e\n\u003cp\u003eNOTES\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with the factory engine bay mounted battery\u003c\/li\u003e\n\u003cli\u003eIf OEM wastegate boost solenoid is still used, it should be relocated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n  \u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003eCCV CATCH CAN\u003c\/h4\u003e\n\u003cp\u003eThe CCV catch can mounts to the windshield wiper motor on the LH side of the firewall. To retain factory functionality, the CCV catch can runs inline between the crankcase vents on the valve cover and the turbo inlet pipe. Large 5\/8\" hose and 10AN fittings are provided for both ends of the catch can. At low loads, it experiences atmospheric pressure. However, when the engine is at high load (WOT), the line will experience high flow from the crankcase into the intake system. This would normally lead to oil and sludge accumulation in the air filter intake pipe. This oil accumulation would spread and be found in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance. The CCV catch can captures this and promotes clean filtered air back into the intake.\u003c\/p\u003e\n\u003cp\u003eNOTE: Compatible with factory ABS vehicles.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0590-FL Dual Catch Can Kit, R32 Skyline GT-R","offer_id":67591217774865,"sku":"20-0590-FL","price":619.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0590-FL.jpg?v=1790637995"},{"product_id":"radium-fuel-delivery-system-nissan-r35-gt-r","title":"Radium Fuel Delivery System, Nissan R35 GT-R — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0572 Fuel Hanger Nissan R35 GT-R Pumps Not Included — Required Items\u003c\/li\u003e\n\u003cli\u003e20-0556-02 Fuel Rails Nissan R35 GT-R — Required Items\u003c\/li\u003e\n\u003cli\u003e20-0956-PK Fuel Rail Plumbing Kit Nissan R35 GT-R — Required Items\u003c\/li\u003e\n\u003cli\u003e20-0851-03 Fuel Hanger Feed Kit Nissan R35 GT-R Stainless Filter — Choose Feed Kit (Filter Type)\u003c\/li\u003e\n\u003cli\u003e20-0851-05 Fuel Hanger Feed Kit Nissan R35 GT-R Microglass Filter — Choose Feed Kit (Filter Type)\u003c\/li\u003e\n\u003cli\u003eTi Automotive BKS1001 — Fuel Pumps\u003c\/li\u003e\n\u003cli\u003e17-0031 DIY Fuel Pump Wiring Kit — DIY Wiring Kits (1 per pump)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis comprehensive kit includes all the Radium Engineering components required to construct a high performance fuel delivery system for the Nissan R35 GT-R. NOTE: the fuel feed kit is not compatible with RHD vehicles. \u003c\/p\u003e\u003cp\u003eThe Radium in-tank fuel pump hanger, fuel feed, fuel rail, pressure regulator, pulse damper completely replace the restrictive OEM fuel system with a setup capable of supporting any power level and safe to use with gasoline and alternative fuels such as methanol and ethanol.\u003c\/p\u003e\u003cp\u003eThe in-tank fuel hanger replaces the factory unit and can be configured with a variety of different fuel pump options. More details on the 20-0572 fuel hanger can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-hanger-nissan-r35-gt-r\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThe fuel lines include pre-fabricated PTFE hoses, a high flow fuel filter, AN fittings and other required parts to plumb fuel to and from the fuel rails. More details on the 20-0851-0X fuel feed kits can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-hanger-nissan-r35-gt-r\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThe included fuel pressure regulator, pulse dampers, gauge and fittings control the flow to the fuel rails. More details on the 20-0956-PK fuel rail plumbing kit can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-rails-nissan-r35-gt-r-vr38dett\"\u003eHERE.\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eFinally fuel enters the VR38DETT engine through high-flow fuel rails. Fuel Injectors are required. More details on the 20-0556-02 fuel rails can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-rails-nissan-r35-gt-r-vr38dett\"\u003eHERE.\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eHOW TO ORDER\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRequired items are preselected. If you already have any of the parts with check boxes next to them, you can uncheck them to remove them from the package\u003c\/li\u003e\n\u003cli\u003eSelect a fuel pump hanger that matches the part number of the fuel pump(s) you wish to install into it.\u003c\/li\u003e\n\u003cli\u003eSelect the fuel hanger plumbing kit by filter type. Stainless are 10 micron and Microglass are a finer 6 micron filtration. Stainless filters have elements that can be cleaned and reused.\u003c\/li\u003e\n\u003cli\u003eChoose your fuel pumps, make sure that they match the hanger selected earlier. If using a pump not available from Radium, choose none to receive no pumps. Pumps will NOT come preinstalled into the hanger: assembly is required.\u003c\/li\u003e\n\u003cli\u003eDIY fuel pump wiring kits are preselected. If you do not need all 3 wiring kits, deselect the ones you do not want.\u003c\/li\u003e\n\u003cli\u003eAfter all selections are made double check them for accuracy and add item to cart and proceed to checkout.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"20-0572 Fuel Hanger Nissan R35 GT-R Pumps Not Included","offer_id":67591217807633,"sku":"20-0572","price":819.95,"currency_code":"USD","in_stock":true},{"title":"20-0556-02 Fuel Rails Nissan R35 GT-R","offer_id":67591217840401,"sku":"20-0556-02","price":349.95,"currency_code":"USD","in_stock":true},{"title":"20-0956-PK Fuel Rail Plumbing Kit Nissan R35 GT-R","offer_id":67591217873169,"sku":"20-0956-PK","price":649.95,"currency_code":"USD","in_stock":true},{"title":"20-0851-03 Fuel Hanger Feed Kit Nissan R35 GT-R Stainless Filter","offer_id":67591217905937,"sku":"20-0851-03","price":659.95,"currency_code":"USD","in_stock":true},{"title":"20-0851-05 Fuel Hanger Feed Kit Nissan R35 GT-R Microglass Filter","offer_id":67591217938705,"sku":"20-0851-05","price":639.95,"currency_code":"USD","in_stock":true},{"title":"Ti Automotive BKS1001","offer_id":67591217971473,"sku":"TI BKS1001-4","price":799.95,"currency_code":"USD","in_stock":true},{"title":"17-0031 DIY Fuel Pump Wiring Kit","offer_id":67591218004241,"sku":"17-0031","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/1x1_Fuel_Delivery_R35.jpg?v=1790637996"},{"product_id":"radium-fuel-filter-kit-nissan","title":"Radium Fuel Filter Kit, Nissan — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0585-05 Fuel Filter Kit Nissan Microglass 6 Micron — Fuel Filter Kit\u003c\/li\u003e\n\u003cli\u003e20-0585-03 Fuel Filter Kit Nissan Stainless 10 Micron — Fuel Filter Kit\u003c\/li\u003e\n\u003cli\u003e20-1585 Fuel Filter Mount, Nissan\/Mazda — Fuel Filter Mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe factory Nissan fuel filter is plumbed between the fuel pump and the fuel rail. This Radium Engineering kit is an OEM fuel filter replacement (Nissan S13 shown below). The Radium kit installs in less than an hour. No cutting or drilling is required. A couple of wrenches is all that is required. Because the Radium filter is less restrictive than the OEM Nissan filter, there is less stress put on the fuel pump. Lower pre filter pressures permit less current draw and thus lower fuel temperatures. This phenomenon permits an increase in fuel flow. Nissan S15 shown above and Nissan R32 shown below. The filters can withstand alternate fuels such as methanol, ethanol, E85, etc. For more information, go \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-filter-elements\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0585-05 Fuel Filter Kit Nissan Microglass 6 Micron","offer_id":67591218037009,"sku":"20-0585-05","price":199.95,"currency_code":"USD","in_stock":true},{"title":"20-0585-03 Fuel Filter Kit Nissan Stainless 10 Micron","offer_id":67591218069777,"sku":"20-0585-03","price":219.95,"currency_code":"USD","in_stock":true},{"title":"20-1585 Fuel Filter Mount, Nissan\/Mazda","offer_id":67591218102545,"sku":"20-1585","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0585-XX.jpg?v=1790637996"},{"product_id":"radium-fuel-filter-mount-nissan-r35-gt-r","title":"Radium Fuel Filter Mount, Nissan R35 GT-R — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0559 Fuel Filter Mount Nissan R35 GT-R — Selection\u003c\/li\u003e\n\u003cli\u003e20-0220-03 Fuel Filter, 10AN ORB Ports, Stainless, 10 Micron — Select Fuel Filter\u003c\/li\u003e\n\u003cli\u003e20-0220-05 Fuel Filter, 10AN ORB Ports, Microglass, 6 Micron — Select Fuel Filter\u003c\/li\u003e\n\u003cli\u003e20-1220-05 Fuel Filter, 10AN ORB Ports, Check Valve, Microglass, 6 Micron — Select Fuel Filter\u003c\/li\u003e\n\u003cli\u003e20-1220-03 Fuel Filter, 10AN ORB Ports, Check Valve, Stainless, 10 Micron — Select Fuel Filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis kit consist of a specially designed heat shield, filter mounting bracket and associated hardware for installing a Radium Engineering fuel filter(sold separately) in the Nissan R35 GT-R. The anodized aluminum bracket secures to the Nissan R35 GT-R chassis using pre-existing threaded bosses. This location is ideal because it is substantially far from the hot downpipes. Also provided is a hose bracket and hardware that secures the fuel hoses further towards the front of the vehicle. All hardware is stainless steel.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0559 Fuel Filter Mount Nissan R35 GT-R","offer_id":67591218135313,"sku":"20-0559","price":174.95,"currency_code":"USD","in_stock":true},{"title":"20-0220-03 Fuel Filter, 10AN ORB Ports, Stainless, 10 Micron","offer_id":67591218168081,"sku":"20-0220-03","price":144.95,"currency_code":"USD","in_stock":true},{"title":"20-0220-05 Fuel Filter, 10AN ORB Ports, Microglass, 6 Micron","offer_id":67591218200849,"sku":"20-0220-05","price":124.95,"currency_code":"USD","in_stock":true},{"title":"20-1220-05 Fuel Filter, 10AN ORB Ports, Check Valve, Microglass, 6 Micron","offer_id":67591218233617,"sku":"20-1220-05","price":149.95,"currency_code":"USD","in_stock":true},{"title":"20-1220-03 Fuel Filter, 10AN ORB Ports, Check Valve, Stainless, 10 Micron","offer_id":67591218266385,"sku":"20-1220-03","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0559n.jpg?v=1790637997"},{"product_id":"radium-fuel-hanger-surge-tank-nissan-350z-g35-g37-q50-q60","title":"Radium Fuel Hanger Surge Tank, Nissan 350Z\/G35\/G37\/Q50\/Q60 — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-1830 FHST 350Z\/G35\/G37\/Q50\/Q60 Fits Walbro GSS342 or AEM 50-1200 — Select Hanger\u003c\/li\u003e\n\u003cli\u003e20-1832 FHST 350Z\/G35\/G37\/Q50\/Q60 Fits Walbro F90000267\/274\/285 or DW440 — Select Hanger\u003c\/li\u003e\n\u003cli\u003e20-0596 Early Model Fuel Level Adapter 350Z G35 — Optional Parts\u003c\/li\u003e\n\u003cli\u003e20-0896 Fuel Level Adapter Skyline G37 Q50 Q60 — Optional Parts\u003c\/li\u003e\n\u003cli\u003e20-0806 Fuel Hanger FPR Block Off — Optional Parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Radium Engineering FHST (fuel hanger surge tank) is the ultimate solution for fuel starvation issues in the Nissan Z33\/V35 chassis. Due to the saddle-bag style OEM fuel tank and insufficient baffling, fuel starvation is common when the vehicle is driven aggressively, such as on a track. This results in unstable fuel pressure and possible engine damage from running too lean. A stand-alone surge tank is an excellent device for eliminating fuel starvation issues. But installing a stand-alone FST is difficult specifically in the 350Z due to the open-cabin design, and lack of a firewall between the driver and the rear of the vehicle. So Radium Engineering chose to create a fully functional fuel surge tank INSIDE the OEM tank.\u003c\/p\u003e\n\u003cp\u003eThe Radium FHST can be used with 1 or 2 aftermarket pumps and supplies 1:1 regulated fuel to the engine. No grinding, bending, or modification of the vehicle's sheet metal is required. Furthermore, the system is compatible with alternative fuels such as E85.\u003c\/p\u003e\n\u003cp\u003eThe comprehensive kit includes all parts necessary to complete the installation including a pressure gauge, external fuel hose, fittings, electrical fuse, relay etc. The user must purchase fuel pumps separately.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0596 EARLY MODEL FUEL LEVEL ADAPTER, 350Z G35\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0596.jpg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis adapter is necessary to adapt the early style OEM level sensor to the stainless steel bracket included in the FHST.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREQUIRED MODELS \u0026amp; BUILD DATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNissan 350Z Jan '02 - Jan '04\u003c\/li\u003e\n\u003cli\u003eNissan Fairlady Z Jan '02 - Jan '04\u003c\/li\u003e\n\u003cli\u003eNissan Skyline Coupe Jan '01 - Mar '03\u003c\/li\u003e\n\u003cli\u003eInfiniti G35 Coupe Jan '01 - Mar '03\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0896 FUEL LEVEL ADAPTER, SKYLINE G37 Q50 Q60\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0896.jpg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eAs shown below, this is necessary to adapt the fuel hanger surge tank kit to the Infiniti G37, Q50, Q60, and Nissan Skyline.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREQUIRED MODELS \u0026amp; BUILD DATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNISSAN SKYLINE SEDAN Dec '08 - up (excluding 2.0L Turbo)\u003c\/li\u003e\n\u003cli\u003eINFINITI G37 SEDAN Dec '08 - up\u003c\/li\u003e\n\u003cli\u003eINFINITI Q50 Nov '13 - up (excluding 2.0L Turbo)\u003c\/li\u003e\n\u003cli\u003eNISSAN SKYLINE COUPE Dec '08 - up\u003c\/li\u003e\n\u003cli\u003eINFINITI G37 COUPE Dec '08 - up\u003c\/li\u003e\n\u003cli\u003eINFINITI Q60 Nov '13 - up (excluding 2.0L Turbo)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0806 FUEL HANGER FPR BLOCK-OFF\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0806.jpg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis new Radium fuel pump hanger can be converted from a built-in regulator dead head system, to a return style system. We understand some users want to run an engine bay mounted regulator with a return line back to the tank. This kit makes that possible.\u003c\/p\u003e\n\u003cp\u003eThe parts in the kit disable the built-in regulator allowing the use of an external regulator elsewhere in the system.\u003c\/p\u003e\n\u003cp\u003eThe hanger top plate features a return port that can be used for the return line from the external regulator. 6AN ORB fitting is required for the return port in order to attach a hose. Keep in mind, this fitting must be low profile (20-1000-0606 shown below).\u003c\/p\u003e\n\u003cp\u003eA fuel pressure regulator (not included) must be installed downstream in the system. This procedure is not discussed in the instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003eHOW THE FHST WORKS\u003c\/h3\u003e\n\u003cp\u003eThe OEM fuel module contains the pump, fuel pressure regulator, filter and has 2 venturi jet pumps that supply fuel from both sides of the tank. However, the OEM fuel module still suffers from slosh resulting in an interruption of the engine's fuel supply.\u003c\/p\u003e\n\u003cp\u003eThe Radium FHST is the best solution in preventing fuel starvation. It installs in the opposite side of the fuel tank from the OEM fuel module and works together to keep fuel delivery consistent in all conditions. The OEM fuel module receives an upgraded fuel pump which is used to send fuel to the Radium FHST keeping the collector box filled. The OEM venturi jet pumps will still function as designed scavenging fuel from the bottom of the tank. The FHST pump(s) are used to supply fuel to the engine through an integrated fuel pressure regulator. As described below, the FHST pump(s) are supplied with fuel from 3 different sources: the pump in the OEM fuel module, the integrated fuel pressure regulator return, and 355LPH one-way fill valves on the bottom of the collector box that allows fuel in, but not out.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eNOTES:\u003c\/h3\u003e\n\u003cp\u003e1. The OEM venturi system must be used with the Radium FHST. \u003cbr\u003e2. The OEM fuel module must be upgraded to a pump with at least 340LPH (@ 40psi) rated flow in order for the venturi system to work correctly.\u003cbr\u003e3. Do NOT modify the OEM FPR or OEM venturi jet pump. \u003cbr\u003e4. Starvation will NOT prematurely occur, but the fuel level gauge will not read accurately.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eINTEGRATED FUEL PRESSURE REGULATOR\u003c\/h3\u003e\n\u003cp\u003eBecause the Nissan fuel system is 'returnless', forced induction tuning can be problematic when a 1:1 fuel to boost pressure ratio is not possible. Like the OEM setup, a fuel pressure regulator (FPR) is integrated into the Radium FHST. The difference is the regulator is externally mounted with an adjustment knob and a vacuum port. If an intake manifold vacuum hose is connected, the FHST's built-in fuel pressure regulator will operate at a 1:1 ratio permitting fuel pressure to proportionally increase with manifold (boost) pressure. Conversely, the vacuum port can remain open to atmosphere and pressure will remain constant (like OEM).\u003c\/p\u003e\n\u003cp\u003eThe returning low pressure fuel from the FPR is sent back into the FST collector box keeping it full. Refer to the installation instructions link above for more details.\u003cbr\u003e\u003cstrong\u003eNOTE: The Radium integrated regulator should be the only FPR in the fuel system.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRA-series regulators feature a 360 degree swiveling vacuum reference port that is double O-ring sealed. This is the first in the industry. It permits the installer to quickly point the vacuum fitting in any direction with no tools required.\u003c\/p\u003e\n\u003cp\u003eThere are 4 interchangeable 10-32 threaded vacuum port fittings provided to cover all scenarios. \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarbed Fitting:\u003c\/strong\u003e A black zinc-plated 3\/16' (5mm) barb machined from high strength steel that is compatible with the following vacuum hoses: 5\/32' (4mm), 3\/16' (5mm), and 7\/32' (6mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3AN Male Fitting:\u003c\/strong\u003e A black zinc-plated adapter machined from high strength steel that is compatible with 3AN hose ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-To-Connect:\u003c\/strong\u003e A nickel-plated brass fitting with Buna-N O-rings that is compatible with hard plastic 1\/4' OD tubing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVacuum Plug:\u003c\/strong\u003e A black oxide stainless steel screw that is used to maintain a constant (non dynamic) fuel pressure. Beginning in the mid 1990s, vehicle manufacturers started transitioning to returnless fuel systems to lower EVAP emissions. To keep temperatures lower, these regulators are mounted inside the tank and do NOT have the ability to be vacuum referenced. This plug would be required in this scenario.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNOTE: When installing the vacuum fitting, it is recommended to use a wicking medium-strength thread locker.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/Vacuum_Reference_Fittings.png\" style=\"width: 240px;\" id=\"myImg\" class=\"myImages\"\u003e \u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/pending-patent.png\" style=\"width: 240px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePLUMBING\u003c\/h3\u003e\n\u003cp\u003eTo clear the OEM LH cover plate, the 8AN ORB threaded feed port and 6AN ORB threaded inlet port feature pre-installed low profile 6AN male fittings. The 6AN ORB threaded 'FPR' port is plugged and is only to be used if 20-0806 is purchased.\u003cbr\u003eWhile the pump 'OUT' fitting can always be changed (if necessary), the FHST 'IN' fitting cannot be changed. The 'IN' fitting incorporates a unique component that is required for the venturi system to work properly.\u003c\/p\u003e\n\u003cp\u003eTwo 6AN fuel hoses are provided to mate each side of the fuel tank units together. The system provides all necessary adapter fittings to reconnect the OEM fuel feed line. For high flow applications, it is recommended to run a large 8AN fuel feed line from the FHST to the fuel rail(s). Part number \u003ca href=\"https:\/\/radiumengineering.myshopify.com\/products\/Low-Profile-Swiveling-Banjo-Fittings\"\u003e20-1000-0808\u003c\/a\u003e 8AN adapter fittings can be purchased separately and installed into the FHST \"OUT\" port. A custom 8AN fuel line will also need to be configured and assembled by the installer.\u003c\/p\u003e\n\u003cp\u003eSock filters are used on all fuel pump inlets. And because the FHST does NOT eliminate the low micron OEM post pump filter, a downstream aftermarket filter is recommended, but not required.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eELECTRICAL\u003c\/h3\u003e\n\u003cp\u003eThe custom designed anti-rotation stainless electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Electrical hardware is included for the fuel pump(s) and OEM level sender. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE. This kit includes 1 relay, 1 fuse, and all associated wiring and hardware to install 1 surge tank pump.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-1830 FHST 350Z\/G35\/G37\/Q50\/Q60 Fits Walbro GSS342 or AEM 50-1200","offer_id":67591218299153,"sku":"20-1830","price":749.95,"currency_code":"USD","in_stock":true},{"title":"20-1832 FHST 350Z\/G35\/G37\/Q50\/Q60 Fits Walbro F90000267\/274\/285 or DW440","offer_id":67591218331921,"sku":"20-1832","price":749.95,"currency_code":"USD","in_stock":true},{"title":"20-0596 Early Model Fuel Level Adapter 350Z G35","offer_id":67591218364689,"sku":"20-0596","price":49.95,"currency_code":"USD","in_stock":true},{"title":"20-0896 Fuel Level Adapter Skyline G37 Q50 Q60","offer_id":67591218397457,"sku":"20-0896","price":49.95,"currency_code":"USD","in_stock":true},{"title":"20-0806 Fuel Hanger FPR Block Off","offer_id":67591218430225,"sku":"20-0806","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/TITLEPICwebsite20-1832.jpg?v=1790637998"},{"product_id":"radium-fuel-hanger-surge-tank-nissan-370z","title":"Radium Fuel Hanger Surge Tank, Nissan Z and 370Z — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-1820 FHST, Nissan Z and 370Z, Fits Walbro GSS342 or AEM 50-1200 — Select Product\u003c\/li\u003e\n\u003cli\u003e20-1821 FHST, Nissan Z and 370Z, Fits Ti Automotive E5LM — Select Product\u003c\/li\u003e\n\u003cli\u003e20-1822 FHST, Nissan Z and 370Z, Fits Walbro F90000267\/274\/285 — Select Product\u003c\/li\u003e\n\u003cli\u003e20-0806 Fuel Hanger FPR Block Off — Optional Parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Radium Engineering FHST (fuel hanger surge tank) is the ultimate solution for fuel starvation issues in the Nissan Z34 and RZ34 chassis. Due to the saddle-bag style OEM fuel tank and insufficient baffling, fuel starvation is common when the vehicle is driven aggressively, such as on a track. This results in unstable fuel pressure and possible engine damage from running too lean. A stand-alone surge tank is an excellent device for eliminating fuel starvation issues. But installing a stand-alone FST is difficult in the Z chassis due to the open-cabin design, and lack of a firewall between the driver and the rear of the vehicle. So Radium Engineering chose to create a fully functional fuel surge tank INSIDE the OEM tank.\u003c\/p\u003e\n\u003cp\u003eThe Radium FHST can be used with 1 or 2 aftermarket pumps and supplies 1:1 regulated fuel to the engine. No grinding, bending, or modification of the vehicle's sheet metal is required. Furthermore the system is compatible with alternative fuels such as E85.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0806 FUEL HANGER FPR BLOCK-OFF\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0806.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis Radium fuel pump hanger can be converted from a built-in regulator dead head system, to a return style system. We understand some users want to run an engine bay mounted regulator with a return line back to the tank. This kit makes that possible. The parts in the kit disable the built-in regulator allowing the use of an external regulator elsewhere in the system. The hanger top plate features a return port that can be used for the return line from the external regulator.\u003c\/p\u003e\n\u003cp\u003e6AN ORB fitting is required for the return port in order to attach a hose. Keep in mind, this fitting must be low profile (\u003ca href=\"https:\/\/www.radiumauto.com\/products\/low-profile-swiveling-banjo-fittings\"\u003e20-1000-0606 \u003c\/a\u003eshown below).\u003c\/p\u003e\n\u003cp\u003eA fuel pressure regulator (not included) must be installed downstream in the system. This procedure is not discussed in the instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003eHOW THE FHST WORKS\u003c\/h3\u003e\n\u003cp\u003eThe OEM fuel module contains the pump, fuel pressure regulator, filter and has 2 venturi jet pumps that draw fuel from both sides of the tank. However, the OEM fuel module still suffers from slosh resulting in an interruption of the engine's fuel supply.\u003c\/p\u003e\n\u003cp\u003eThe Radium FHST is the best solution in preventing fuel starvation. It installs in the opposite side of the fuel tank from the OEM fuel module and works with the OEM module to keep fuel delivery consistent in all conditions.\u003c\/p\u003e\n\u003cp\u003eThe OEM fuel module receives an upgraded fuel pump which is used to send fuel to the Radium FHST keeping the collector box filled. The OEM venturi jet pumps will still function as designed scavenging fuel from the bottom of the tank. The FHST pump(s) are used to supply fuel to the engine through an integrated fuel pressure regulator. As described below, the FHST pump(s) are supplied with fuel from 3 different sources: the pump in the OEM fuel module, the integrated fuel pressure regulator return, and 355LPH one-way fill valves on the bottom of the collector box that allows fuel in, but not out.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eNOTES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe OEM venturi system must be used with the Radium FHST\u003c\/li\u003e\n\u003cli\u003eThe OEM fuel module must be upgraded to a pump with at least 340LPH (@ 40psi) rated flow in order for the venturi system to work correctly\u003c\/li\u003e\n\u003cli\u003eDo NOT modify the OEM FPR or OEM venturi jet pump\u003c\/li\u003e\n\u003cli\u003eStarvation will NOT prematurely occur, but the fuel level gauge will not read accurately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eINTEGRATED FUEL PRESSURE REGULATOR\u003c\/h3\u003e\n\u003cp\u003eBecause the Nissan fuel system is \"returnless\", forced induction tuning can be problematic when a 1:1 fuel to boost pressure ratio is not possible. Like the OEM setup, a fuel pressure regulator (FPR) is integrated into the Radium FHST. The difference is the regulator is externally mounted with an adjustment knob and a vacuum port. If an intake manifold vacuum hose is connected, the FHST's built-in fuel pressure regulator will operate at a 1:1 ratio permitting fuel pressure to proportionally increase with manifold (boost) pressure. Conversely, the vacuum port can remain open to atmosphere and pressure will remain constant (like OEM).\u003c\/p\u003e\n\u003cp\u003eThe returning low pressure fuel from the FPR is sent back into the FST collector box keeping it full.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNOTE: The Radium integrated regulator should be the only FPR in the fuel system.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eRA-series regulators feature a 360 degree swiveling vacuum reference port that is double O-ring sealed. This is the first in the industry. It permits the installer to quickly point the vacuum fitting in any direction with no tools required.\u003c\/p\u003e\n\u003cp\u003eThere are 4 interchangeable #10-32 threaded vacuum port fittings provided to cover all scenarios:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarbed Fitting:\u003c\/strong\u003e A black zinc-plated 3\/16\" (5mm) barb machine from high strength steel that is compatible with the following vacuum hoses: 5\/32\" (4mm), 3\/16\" (5mm), and 7\/32\" (6mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3AN Male Fitting:\u003c\/strong\u003e A black zinc-plated adapter machined from high strength steel that is compatible with 3AN hose ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-To-Connect:\u003c\/strong\u003e A nickel-plated brass fitting with Buna-N O-rings that is compatible with hard plastic 1\/4\" OD tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVacuum Plug:\u003c\/strong\u003e A black oxide stainless steel screw that is used to maintain a constant (non dynamic) fuel pressure. Beginning in the mid 1990s, vehicle manufacturers started transitioning to returnless fuel systems to lower EVAP emissions. To keep temperatures lower, these regulators are mounted inside the tank and do NOT have the ability to be vacuum referenced. This plug would be required in this scenario\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNOTE: When installing the vacuum fitting, it is recommended to use a wicking medium-strength thread locker.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/Vacuum_Reference_Fittings.png\" style=\"width: 240px;\" id=\"myImg\" class=\"myImages\"\u003e \u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/pending-patent.png\" style=\"width: 240px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePLUMBING\u003c\/h3\u003e\n\u003cp\u003eTo clear the OEM LH cover plate, the 8AN ORB threaded feed port and 6AN ORB threaded inlet port feature pre-installed low profile 6AN male fittings. The 6AN ORB threaded FPR port is plugged and is only to be used if 20-0806 is purchased. \u003c\/p\u003e\n\u003cp\u003eWhile the pump \"OUT\" fitting can always be changed (if necessary), the FHST \"IN\" fitting cannot be changed. The \"IN\" fitting incorporates a unique component that is required for the venturi system to work properly. \u003c\/p\u003e\n\u003cp\u003eTwo 6AN fuel hoses are provided to mate each side of the fuel tank units together. The system provides all necessary adapter fittings to reconnect the OEM fuel feed line. For high flow applications, it is recommended to run a large 8AN fuel feed line from the FHST to the fuel rail(s). The \u003ca href=\"https:\/\/www.radiumauto.com\/products\/low-profile-swiveling-banjo-fittings\"\u003e20-1000-0808\u003c\/a\u003e 8AN adapter fitting can be purchased separately and installed into the FHST \"OUT\" port. A custom 8AN fuel line will also need to be configured and assembled by the installer.\u003c\/p\u003e\n\u003cp\u003eSock filters are used on all fuel pump inlets. And because the FHST does NOT eliminate the low micron OEM post pump filter, a downstream aftermarket filter is recommended, but not required.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eELECTRICAL\u003c\/h3\u003e\n\u003cp\u003eThe custom designed anti-rotation stainless electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Electrical hardware is included for the fuel pump(s) and OEM level sender. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE. \u003c\/p\u003e\n\u003cp\u003eOne relay, one fuse, and all associated wiring and hardware is provided to install 1 surge tank pump. If an extra fuel pump will be installed, purchase a Radium 17-0031 DIY Wiring Kit \u003ca href=\"https:\/\/www.radiumauto.com\/products\/diy-fuel-pump-wiring-kit\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-1820 FHST, Nissan Z and 370Z, Fits Walbro GSS342 or AEM 50-1200","offer_id":67591218462993,"sku":"20-1820","price":749.95,"currency_code":"USD","in_stock":true},{"title":"20-1821 FHST, Nissan Z and 370Z, Fits Ti Automotive E5LM","offer_id":67591218495761,"sku":"20-1821","price":779.95,"currency_code":"USD","in_stock":true},{"title":"20-1822 FHST, Nissan Z and 370Z, Fits Walbro F90000267\/274\/285","offer_id":67591218528529,"sku":"20-1822","price":749.95,"currency_code":"USD","in_stock":true},{"title":"20-0806 Fuel Hanger FPR Block Off","offer_id":67591218561297,"sku":"20-0806","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-1820_1x1_7b09e65e-1bef-47c9-8122-e1e6e01c63fe.jpg?v=1790637999"},{"product_id":"radium-fuel-hanger-surge-tank-r32-skyline-gt-r","title":"Radium Fuel Hanger Surge Tank, R32 Skyline GT-R — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0740-00 FHST R32 GT-R Fits Walbro GSS342 or AEM 50-1200 — Select FHST\u003c\/li\u003e\n\u003cli\u003e20-0741-00 FHST R32 GT-R Fits Ti Automotive E5LM — Select FHST\u003c\/li\u003e\n\u003cli\u003e20-0742-00 FHST R32 GT-R Fits Walbro F90000267\/274\/285 — Select FHST\u003c\/li\u003e\n\u003cli\u003e20-0703-03 Fuel Hanger Plumbing Kit Early Nissan Stainless — Select Plumbing Kit\u003c\/li\u003e\n\u003cli\u003e20-0703-05 Fuel Hanger Plumbing Kit Early Nissan Microglass — Select Plumbing Kit\u003c\/li\u003e\n\u003cli\u003e13-1187 Triple Pump Base, 12mm Inlet Brushless Pumps — Optional Parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Radium Engineering FHST (fuel hanger surge tank) is the ultimate solution for fuel starvation issues. Fuel pump starvation is common when a vehicle is driven aggressively and fuel sloshes away from the in-tank fuel pump.\u003c\/p\u003e\n\u003cp\u003eA stand-alone surge tank is an excellent device for eliminating fuel starvation, but installation can be complex. The FHST is a fully functional fuel surge tank contained inside the OEM fuel tank. It can be configured with 1, 2, or 3 high pressure pumps to feed fuel to the engine and 1 lift pump to keep the surge tank full. This system can meet the fuel demands of any engine power level for your R32 GT-R.\u003c\/p\u003e\n\u003cp\u003eEven with all of the extra fuel pumps, the FHST system is very straight forward and relatively simple to install. No grinding, bending, or modification of the vehicle is required. Furthermore, the system is compatible with alternative fuels such as E85.\u003c\/p\u003e\n\u003cp\u003eAll kits come partially assembled with the final assembly performed by the technician during installation. There will be enough parts to run 1, 2, or 3 surge tank pumps and 1 lift pump. A lift pump is required in all installations.\u003c\/p\u003e\n\u003cp\u003eThe surge tank on this system is the collector box that is attached to the underside of the plate. It works by keeping fuel trapped around the pump (or pumps) that feed the engine. This ensures that fuel starvation will not occur and the supply of fuel to the engine will remain steady under all driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe lift pump mounts in a stainless steel collector and scavenges fuel from the bottom of the tank to send to the surge tank. Fuel returning from the regulator also is routed into the surge tank, helping to keep it topped off.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eELECTRICAL\u003c\/h3\u003e\n\u003cp\u003eThe custom designed anti-rotation stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels.\u003c\/p\u003e\n\u003cp\u003eBecause the required lift pump supplying the FHST (in the original pump location) will now operate at very low pressure (high flow), the OEM external fuel pump wiring will be sufficient for the lift pump.\u003c\/p\u003e\n\u003cp\u003eHigh current fuel pump wiring is provided for installing one FHST pump (1 relay, 1 fuse, and all associated wiring and hardware). To wire in additional FHST pumps, extra fuses and relays are required. Consider purchasing Radium part number 17-0031 DIY Wiring Kit \u003ca href=\"https:\/\/www.radiumauto.com\/products\/diy-fuel-pump-wiring-kit\"\u003eHERE\u003c\/a\u003e for each additional pump.\u003c\/p\u003e\n\u003cp\u003eThe factory fuel level sensor is integrated into the OEM sender so a replacement fuel level sensor is provided. This new OEM Nissan sensor has the correct resistance range to work the gauge cluster properly. The original low fuel switch is reused.\u003c\/p\u003e\n\u003cp\u003eAll in-tank wiring is insulated with chemically resistant ETFE. Electrical hardware is included for the fuel pump(s) and sensors.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePLUMBING\u003c\/h3\u003e\n\u003cp\u003eThe preinstalled barb fittings permit direct connections to the factory rubber fuel hoses. No extra fuel plumbing is required.\u003c\/p\u003e\n\u003cp\u003e8AN (feed) and 6AN (return) adapter fittings are provided for connecting aftermarket AN style hoses. The fitting ports are machined low enough to clear the unibody sheet metal.\u003c\/p\u003e\n\u003cp\u003e(Clear fuel pump cover for the R32 can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pump-access-covers-transparent\"\u003eHERE\u003c\/a\u003e).\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eNOTES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel pumps are sold separately\u003c\/li\u003e\n\u003cli\u003eAt minimum, one lift pump and one surge pump is required to run this system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0703-0X Fuel Hanger Plumbing Kit Early Nissan\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0703.jpg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThese plumbing kits include everything required to plumb the fuel system between the Radium FHST and the fuel rail. This kit is NOT designed for the stock fuel rail.\u003c\/p\u003e\n\u003cp\u003eThe kit includes 8AN (1\/2\") feed hose that runs from the fuel pump hanger through the provided fuel filter. A 8AN 90 degree PushLok hose end is included for connecting to an 8AN male aftermarket fuel rail fitting (not included). A 6AN (3\/8\") fuel hose runs from the FPR (not included) to the fuel pump hanger return port. A 6AN 90 degree PushLok hose end is included for connecting to an 6AN male aftermarket FPR fitting (not included). The fuel lines run though billet aluminum fuel brake line retainers. For HICAS retainers go \u003ca href=\"https:\/\/www.radiumauto.com\/products\/nissan-retainer-kits-for-fuel-brake-and-hicas-lines\"\u003eHERE\u003c\/a\u003e. The fuel lines clear the OEM fuel pump cover and do not require any cutting or drilling to get them past the fuel tank. The feed and\/or return hose can be easily modified for installation of an in-line flex fuel sensor.\u003c\/p\u003e\n\u003cp\u003eThe included Radium Engineering fuel filter mounts in the stock filter location using a specifically designed Nissan bolt-on billet mount.\u003c\/p\u003e\n\u003cp\u003eDepending on the kit selected (-03,-05), the fuel filter will be assembled with a choice of different elements. Stainless steel mesh or micro-fiberglass.\u003c\/p\u003e\n   \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e13-1187 Base for Brand X Brushless Pumps\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/13-1187-Top.png\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n  \u003cp\u003eFor the pumps with the red indicator below, this base is required to allow the pump inlet to fit into the triple pump strainer in these hangers.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003csup\u003e(3)\u003c\/sup\u003e\u003c\/span\u003e\u003cem\u003eThese pumps do NOT fit into the included pump strainer. Part number \u003ca href=\"https:\/\/www.radiumauto.com\/products\/base-for-brand-x-brushless-pumps\"\u003e13-1187\u003c\/a\u003e is required to use these pumps. You can order it from the optional parts on the right.\u003c\/em\u003e\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0740-00 FHST R32 GT-R Fits Walbro GSS342 or AEM 50-1200","offer_id":67591218594065,"sku":"20-0740-00","price":789.95,"currency_code":"USD","in_stock":true},{"title":"20-0741-00 FHST R32 GT-R Fits Ti Automotive E5LM","offer_id":67591218626833,"sku":"20-0741-00","price":819.95,"currency_code":"USD","in_stock":true},{"title":"20-0742-00 FHST R32 GT-R Fits Walbro F90000267\/274\/285","offer_id":67591218659601,"sku":"20-0742-00","price":819.95,"currency_code":"USD","in_stock":true},{"title":"20-0703-03 Fuel Hanger Plumbing Kit Early Nissan Stainless","offer_id":67591218692369,"sku":"20-0703-03","price":549.95,"currency_code":"USD","in_stock":true},{"title":"20-0703-05 Fuel Hanger Plumbing Kit Early Nissan Microglass","offer_id":67591218725137,"sku":"20-0703-05","price":529.95,"currency_code":"USD","in_stock":true},{"title":"13-1187 Triple Pump Base, 12mm Inlet Brushless Pumps","offer_id":67591218757905,"sku":"13-1187","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/TITLE_PIC_website_20-0740-00_5bc6376a-ccf0-41ae-8d78-72bd92cb36a8.jpg?v=1790637999"},{"product_id":"radium-fuel-hanger-nissan-r35-gt-r","title":"Radium Fuel Pump Hanger, Nissan R35 GT-R — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0572 Fuel Hanger Nissan R35 GT-R Pumps Not Included — Select Hanger\u003c\/li\u003e\n\u003cli\u003e20-0851-05 Fuel Hanger Feed Kit Nissan R35 GT-R Microglass Filter — Select Fuel Feed Kit\u003c\/li\u003e\n\u003cli\u003e20-0851-03 Fuel Hanger Feed Kit Nissan R35 GT-R Stainless Filter — Select Fuel Feed Kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf a complete fuel delivery kit for the R35 GT-R is needed, go \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Delivery-System-Nissan-R35-GT-R\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePRODUCT VIDEO\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/2ohWAGH30Dw\" style=\"display: block;\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0572 Fuel Hanger Nissan R35 GT-R Pumps Not Included\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0572n.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe Radium Engineering fuel hanger completely replaces the factory in-tank fuel pump unit in the R35 GT-R and permits up to three 39mm diameter aftermarket pumps (brushed or brushless) to supply fuel to the engine. No permanent vehicle modifications are required for installation. The pumps are housed in an aluminum collector box that is kept full during operation. This ensures that fuel starvation does not occur, even during aggressive driving. The fuel pump outlet port is 10AN ORB female threaded and includes a 6AN male adapter, while the return port is 8AN ORB female threaded and includes a 6AN male adapter. The system is compatible with alternative fuels such as methanol, ethanol, E85, etc. Radium Engineering recommends reviewing the installation instructions (link above) before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePREVENTING FUEL STARVATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe GT-R saddle bag style fuel tank uses two OEM venturi jet pumps. They supply fuel from both sides of the tank to the OEM pump bucket and are driven by fuel returning from the regulator. When the fuel pumps are upgraded, these venturi jet pumps become a restriction in the return line, resulting in elevated fuel pressures and unreliable regulator performance. By reconfiguring the venturi jet pump plumbing, Radium Engineering has kept their functions without impacting the returning fuel from the regulator. This allows the pumps to be upgraded without fuel pressure concerns. \u003c\/p\u003e\n\u003cp\u003eDepending on fuel pressure, the venturi jet pumps will consume 15-45 LPH. Take this fuel loss into consideration when sizing the fuel pumps.\u003c\/p\u003e\n\u003cp\u003eIn addition to the venturi jet pumps scavenging fuel, the pressure regulator return also keeps the large collector box filled with fuel. Additionally, the Radium Engineering 20-0572 incorporates three 355LPH one-way fill valves integrated to the bottom of the collector box that allows fuel in, but not out. The 1-way fill valves flow 355LPH each (1,065LPH total).\u003cbr\u003e All of the components work together to keep the collector box filled with fuel and prevent fuel pump starvation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePLUMBING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo clear the OEM fuel pump cover plate, the standard fuel hanger kit includes low profile swiveling adapters that convert to 6AN male, along with short 6AN PTFE hoses and adapters for easy connection to the OEM fuel piping. Other adapter fittings are available and are sold separately. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFUEL FILTRATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSock filters are provided for all 3 fuel pump inlets. Since the fuel hanger eliminates the non serviceable post pump filter, an aftermarket filter is required to be installed downstream. This filter is included in our Fuel Feed Line Kits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fuel pump hanger features custom designed anti-rotation stainless electrical studs that easily handle the high current demand that multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Electrical hardware is included for the fuel pump(s) and OEM sensors. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE. The factory temperature and fuel level sensors are reused.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0851-03 \u0026amp; 20-0851-05 Fuel Hanger Feed Kits, Nissan R35 GT-R\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0851-0X.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eWhen installing a Radium in-tank fuel hanger with high-flow aftermarket pumps, the stock R35 fuel lines may not be sufficient. The fuel hanger feed kits include everything required to connect all Radium fuel hangers directly to Radium \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-rails-nissan-r35-gt-r-vr38dett\"\u003efuel rails\u003c\/a\u003e. It comes with new PTFE feed lines and re-uses the factory feed line as the return for the regulator.\u003cbr\u003e\u003cbr\u003eThe fuel filters provided in the 20-0851-03 and 20-0851-05 feed kits feature an integrated check valve to hold fuel pressure after the engine is shut OFF. Because fitment is extremely tight, the 10AN pump outlet port is first split into two 6AN feed lines. The dual 6AN PTFE lines run parallel under the vehicle and are secured using billet aluminum retainers with OEM hardware. The dual 6AN PTFE lines run through a serviceable fuel filter that secures using a GT-R specific heat shield. The 2 lines split and are ready to be installed into the 6AN male fittings on the front ports of the fuel rails (not included).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0572 Fuel Hanger Nissan R35 GT-R Pumps Not Included","offer_id":67591218790673,"sku":"20-0572","price":819.95,"currency_code":"USD","in_stock":true},{"title":"20-0851-05 Fuel Hanger Feed Kit Nissan R35 GT-R Microglass Filter","offer_id":67591218823441,"sku":"20-0851-05","price":639.95,"currency_code":"USD","in_stock":true},{"title":"20-0851-03 Fuel Hanger Feed Kit Nissan R35 GT-R Stainless Filter","offer_id":67591218856209,"sku":"20-0851-03","price":659.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0572_1x1_Shopify.jpg?v=1790638006"},{"product_id":"radium-fuel-line-retaining-kit-nissan-r35-gt-r","title":"Radium Fuel Line Retaining Kit, Nissan R35 GT-R","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0560 Fuel Line Retaining Kit Nissan R35 GT-R\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe Radium Engineering fuel line retaining kit supports up to 2 aftermarket fuel lines under the Nissan R35 GT-R. The retainers permit hoses to be ran in a channel different than the OEM fuel and brake lines. They are typically installed underneath the RH side of the vehicle, as shown below. They can also be installed underneath the LH side of the vehicle as well (see below).\u003c\/p\u003e\n\u003cp\u003eThe 5 included retainers are made from 6061 aluminum and anodized to resist oxidation.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0560 Fuel Line Retaining Kit Nissan R35 GT-R","offer_id":67591218888977,"sku":"20-0560","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0560.jpg?v=1790638007"},{"product_id":"radium-fuel-pump-hanger-and-fhst-late-nissan","title":"Radium Fuel Pump Hanger and FHST, Late Nissan — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0630-00 Fuel Hanger Late Nissan Fits Walbro GSS342 or AEM 50-1200 — Fuel Pump Hanger\u003c\/li\u003e\n\u003cli\u003e20-0632-00 Fuel Hanger Late Nissan Fits Walbro F90000267\/274\/285 or E5LM — Fuel Pump Hanger\u003c\/li\u003e\n\u003cli\u003e20-0700 FHST Add-On Late Nissan Fits Walbro GSS342 or AEM 50-1200 — FHST Add-On\u003c\/li\u003e\n\u003cli\u003e20-0701 FHST Add-On Late Nissan Fits Walbro F90000267\/274\/285 or E5LM — FHST Add-On\u003c\/li\u003e\n\u003cli\u003e20-0702-05 Fuel Hanger Plumbing Kit Late Nissan Microglass — Plumbing Kit (Select Filter Type)\u003c\/li\u003e\n\u003cli\u003e20-0702-03 Fuel Hanger Plumbing Kit Late Nissan Stainless — Plumbing Kit (Select Filter Type)\u003c\/li\u003e\n\u003cli\u003e20-1533 Check Valve 6AN ORB to 8.5mm Barb — Optional Parts\u003c\/li\u003e\n\u003cli\u003e20-1534 Check Valve 6AN ORB to 10mm Barb — Optional Parts\u003c\/li\u003e\n\u003cli\u003e20-0798 Pump Outlet Adapter Check Valve 10mm Barb — Optional Parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Radium Engineering fuel pump hanger replaces the entire factory fuel pump assembly inside the Nissan fuel tank. It can be configured with 1 or 2 aftermarket fuel pumps to meet the fuel demands of various high performance engines. Fuel pump options include Walbro (Ti Automotive) or AEM. The pump(s) are suspended down in the bottom of the tank, similar to the stock fuel hanger. From there, they feed through polyamide nylon tubing to the top hat. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe factory Nissan fuel level sender, low fuel switch, and fuel temperature (OBD-II only) are reused so full functionality is retained. A venturi jet pump is integrated into the top plate and provides means to draw fuel from the opposite side of the fuel tank.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0630-00 \u0026amp; 20-0632-00 Fuel Pump Hanger\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\n\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0630-00.jpg\" alt=\"20-0630-00\"\u003e \u003cbr\u003e\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0632-00.jpg\" alt=\"20-0632-00\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe pre-installed adapter fittings permit direct connections for all factory fuel line variations (SAE quick connect and hose barb). No extra fuel plumbing is required if using stock fuel lines.\u003c\/p\u003e\n  \u003cul\u003e\n\u003cli\u003eThe threads on the feed port are 10AN ORB (7\/8\"-14) female\u003c\/li\u003e\n\u003cli\u003eThe threads on the return port are 8AN ORB (3\/4\"-16) female\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf using aftermarket AN style hoses, low profile AN swivel adapter fittings will be required and are sold separately. Straight adapter fittings may also be used, but clearance with the access cover plate will not be possible. When installing aftermarket hoses, the crossover port and hose (center) does not need to be changed.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.radiumauto.com\/products\/Low-Profile-Swiveling-Banjo-Fittings\" rel=\"noopener\" target=\"_blank\"\u003eSHOP LOW PROFILE SWIVEL FITTINGS HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe OEM system uses a venturi jet pump to transfer fuel from the passive side of the tank to the active (pump) side of the tank. When using aftermarket high-flow pumps this venturi jet pump creates a restriction in the fuel return, resulting in unwanted backpressure and unmanageable fuel pressure. Radium Engineering has redesigned the siphon system to completely eliminate this restriction but still effectively scavenge fuel the same as factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed anti-rotation stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Enough studs are built in the top hat to accommodate brushless fuel pumps as well as the FHST add-on, described below.\u003c\/p\u003e\n\u003cp\u003eElectrical hardware is included for the fuel pump(s) and sensors. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle fuel pump installations can re-use the OEM fuel pump controller wiring\u003c\/li\u003e\n\u003cli\u003eIt is recommended to upgrade OEM wiring to ensure the pumps are receiving full power and operating at their full potential\u003c\/li\u003e\n\u003cli\u003eUniversal fuel pump wiring kits can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DIY-Fuel-Pump-Wiring-Kit-P368\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e. Select one for each aftermarket pump\u003c\/li\u003e\n\u003cli\u003eDepending on fuel pressure, the venturi jet pump will consume 15-45 LPH. Take this fuel loss into consideration when sizing the fuel pumps\u003c\/li\u003e\n\u003cli\u003eIf it is important for fuel pressure to hold steady after the engine is shut down, install one of these \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Universal-Check-Valve-Kits\"\u003eCHECK VALVES\u003c\/a\u003e somewhere in the fuel system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0700 \u0026amp; 20-0701 FHST Add-On\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\n\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0700.jpg\" alt=\"20-0700\"\u003e \u003cbr\u003e\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0701.jpg\" alt=\"20-0701\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis is an optional add-on for the fuel pump hanger. The corresponding fuel pupm hanger based on the fuel pumps being used is required to install this add-on. It is recommended to use a single pump hanger to feed the surge tank. The surge tank can then be equipped with one or two fuel pumps to feed the engine.\u003c\/p\u003e\n\u003cp\u003eThe Radium Engineering FHST (fuel hanger surge tank) add-on is the ultimate solution for fuel starvation issues. Due to the saddle-bag style OEM fuel tank and insufficient baffling in late model Nissans, fuel slosh is common when driven aggressively. Unstable pressure resulting in a lean fuel mixture can cause engine damage. A stand-alone surge tank is an excellent device for eliminating fuel starvation issues, but installation can be complex. This add-on is a fully functional fuel surge tank mounted inside the OEM tank.\u003c\/p\u003e\n\u003cp\u003eSimple plug and play connections are all that is required to attach the 2 systems together. The FHST add-on utilizes most of the Radium fuel hanger parts. The surge tank can hold 1 or 2 aftermarket pumps including brushless variations. With the addition of the fuel pump in the OEM location, there could be 2-3 pumps inside the gas tank (total). Even with all of the extra fuel pumps, the FHST system is very straight forward and relatively simple to install.\u003c\/p\u003e\n\u003cp\u003eNo grinding, bending, or modification of the vehicle is required. The system is compatible with all alternative fuels such as E85.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat keeps the surge tank full?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe surge tank fuel pump(s) are supplied with fuel from 4 different sources:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe high flow (low pressure) fuel pump located in the OEM location\u003c\/li\u003e\n\u003cli\u003eThe fuel returning from the fuel pressure regulator (FPR)\u003c\/li\u003e\n\u003cli\u003eThe fuel transfer from the integrated venturi jet pump siphon\u003c\/li\u003e\n\u003cli\u003eThe 355LPH one-way fill valve on the bottom of the surge tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eExternal high current fuel pump wiring is provided for installing one FHST pump (1 relay, 1 fuse, and all associated wiring and hardware). To wire in a second FHST pump, a second fuse and relay are required. Consider purchasing Radium 17-0031 DIY Wiring Kit \u003ca href=\"https:\/\/www.radiumauto.com\/products\/diy-fuel-pump-wiring-kit\"\u003eHERE\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNOTE: Because the fuel pump supplying the FHST (in the original pump location) will now operate at very low pressure (high flow), the OEM external fuel pump wiring will be sufficient for this \"lift\" pump.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0702-03 \u0026amp; 20-0702-05 Fuel Hanger Plumbing Kits\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0702-0X.jpg\" alt=\"20-0702-0X\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis plumbing kits include everything required to plumb the fuel system between the Radium pump hanger and the fuel rail. This kit is NOT designed for the stock fuel rail.\u003c\/p\u003e\n\u003cp\u003eThe kit includes 8AN (1\/2\") feed hose that runs from the fuel pump hanger through the provided fuel filter. A 8AN 90 degree PushLok hose end is included for connecting to an 8AN male aftermarket fuel rail fitting (not included). A 6AN (3\/8\") fuel hose runs from the FPR (not included) to the fuel pump hanger return port. A 6AN 90 degree PushLok hose end is included for connecting to an 6AN male aftermarket FPR fitting (not included). The fuel lines run though billet aluminum fuel brake line retainers. The fuel lines clear the OEM fuel pump cover and do not require any cutting or drilling to get them past the fuel tank. The feed and\/or return hose can be easily modified for installation of an in-line flex fuel sensor.\u003c\/p\u003e\n\u003cp\u003eThe included Radium Engineering fuel filter mounts in the stock filter location using a specifically designed Nissan bolt-on billet mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0630-00 Fuel Hanger Late Nissan Fits Walbro GSS342 or AEM 50-1200","offer_id":67591218921745,"sku":"20-0630-00","price":529.95,"currency_code":"USD","in_stock":true},{"title":"20-0632-00 Fuel Hanger Late Nissan Fits Walbro F90000267\/274\/285 or E5LM","offer_id":67591218954513,"sku":"20-0632-00","price":529.95,"currency_code":"USD","in_stock":true},{"title":"20-0700 FHST Add-On Late Nissan Fits Walbro GSS342 or AEM 50-1200","offer_id":67591218987281,"sku":"20-0700","price":399.95,"currency_code":"USD","in_stock":true},{"title":"20-0701 FHST Add-On Late Nissan Fits Walbro F90000267\/274\/285 or E5LM","offer_id":67591219020049,"sku":"20-0701","price":399.95,"currency_code":"USD","in_stock":true},{"title":"20-0702-05 Fuel Hanger Plumbing Kit Late Nissan Microglass","offer_id":67591219052817,"sku":"20-0702-05","price":599.95,"currency_code":"USD","in_stock":true},{"title":"20-0702-03 Fuel Hanger Plumbing Kit Late Nissan Stainless","offer_id":67591219085585,"sku":"20-0702-03","price":619.95,"currency_code":"USD","in_stock":true},{"title":"20-1533 Check Valve 6AN ORB to 8.5mm Barb","offer_id":67591219118353,"sku":"20-1533","price":39.95,"currency_code":"USD","in_stock":true},{"title":"20-1534 Check Valve 6AN ORB to 10mm Barb","offer_id":67591219151121,"sku":"20-1534","price":39.95,"currency_code":"USD","in_stock":true},{"title":"20-0798 Pump Outlet Adapter Check Valve 10mm Barb","offer_id":67591219183889,"sku":"20-0798","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0630-00.jpg?v=1790638007"},{"product_id":"radium-fuel-pump-hanger-early-nissan","title":"Radium Fuel Pump Hanger, Early Nissan — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0730-00 Fuel Hanger Early Nissan Fits Walbro GSS342 or AEM 50-1200 — Select Hanger\u003c\/li\u003e\n\u003cli\u003e20-0732-00 Fuel Hanger Early Nissan Fits Walbro F90000267\/274\/285 — Select Hanger\u003c\/li\u003e\n\u003cli\u003e20-0703-05 Fuel Hanger Plumbing Kit Early Nissan Microglass — Select Plumbing Kit\u003c\/li\u003e\n\u003cli\u003e20-0703-03 Fuel Hanger Plumbing Kit Early Nissan Stainless — Select Plumbing Kit\u003c\/li\u003e\n\u003cli\u003e13-1187 Triple Pump Base, 12mm Inlet Brushless Pumps — Optional Parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0730-00 Fuel Hanger Early Nissan Fits Walbro GSS342 or AEM 50-1200\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0730-00update.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis Radium Engineering fuel pump hanger replaces the stock fuel pump module in the Nissan vehicles listed above. It can be configured with 1, 2, or 3 aftermarket fuel pumps to meet the fuel demands of various high performance engines. No cutting or modifying of the vehicle's sheet metal or fuel tank is required for installation.\u003c\/p\u003e\n\u003cp\u003eThe fuel pumps are positioned in the factory collector bowl. Fuel is drawn in through the mesh filter located at the bottom of the assembly. As shown below, fuel cannot pass between the 3 independent filtration chambers (A, B, C). If less than 3 pumps are installed, the empty port does NOT need to blocked off.\u003c\/p\u003e\n\u003cp\u003eThe functionality of the factory Nissan fuel level float and low fuel switch are retained. The fuel pump outlets merge into a single 8AN female port on the top plate. And because of the integrated check valves, fuel pump staging is permitted. The return port also uses a 8AN ORB female port on the top plate.\u003c\/p\u003e\n\u003cp\u003eAdapter fittings are included for easy connection to the factory fuel lines. Also included in all variations of the kit are adapter fittings for connecting aftermarket AN style hoses. The fitting ports are machined low enough to clear the unibody sheet metal.\u003c\/p\u003e\n\u003cp\u003eThere are many different combinations of fuel pumps available described below. Choosing the pump(s) is based on the expected engine power output and the fuel type (gasoline, E85, etc.) The kit will have enough parts to run 1, 2, or 3 fuel pumps, but the user must supply their own compatible fuel pumps and some assembly is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed anti-rotation stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting.\u003c\/p\u003e\n\u003cp\u003eElectrical hardware is included for the fuel pump(s) and sensors. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE. \u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0732-00 Fuel Hanger Early Nissan Fits Walbro F90000267\/274\/285\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0732-00.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis Radium Engineering fuel pump hanger replaces the stock fuel pump module in the Nissan vehicles listed above. It can be configured with 1, 2, or 3 aftermarket fuel pumps to meet the fuel demands of various high performance engines. No cutting or modifying of the vehicle's sheet metal or fuel tank is required for installation.\u003c\/p\u003e\n\u003cp\u003eThe fuel pumps are positioned in the factory collector bowl. Fuel is drawn in through the mesh filter located at the bottom of the assembly. As shown below, fuel cannot pass between the 3 independent filtration chambers (A, B, C). If less than 3 pumps are installed, the empty port does NOT need to blocked off.\u003c\/p\u003e\n\u003cp\u003eThe functionality of the factory Nissan fuel level float and low fuel switch are retained. The fuel pump outlets merge into a single 8AN female port on the top plate. And because of the integrated check valves, fuel pump staging is permitted. The return port also uses a 8AN ORB female port on the top plate.\u003c\/p\u003e\n\u003cp\u003eAdapter fittings are included for easy connection to the factory fuel lines. Also included in all variations of the kit are adapter fittings for connecting aftermarket AN style hoses. The fitting ports are machined low enough to clear the unibody sheet metal.\u003c\/p\u003e\n\u003cp\u003eThere are many different combinations of fuel pumps available described below. Choosing the pump(s) is based on the expected engine power output and the fuel type (gasoline, E85, etc.) The kit will have enough parts to run 1, 2, or 3 fuel pumps, but the user must supply their own compatible fuel pumps and some assembly is required.\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed anti-rotation stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting.\u003c\/p\u003e\n\u003cp\u003eElectrical hardware is included for the fuel pump(s) and sensors. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE. \u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0703-03 \u0026amp; 20-0703-05 Fuel Hanger Plumbing Kit Early Nissan\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0703.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThese plumbing kits include everything required to plumb the fuel system between the Radium pump hanger and the fuel rail. This kit is NOT designed for the stock fuel rail.\u003c\/p\u003e\n\u003cp\u003eThe kit includes 8AN (1\/2\") feed hose that runs from the fuel pump hanger through the provided fuel filter. An 8AN 90 degree PushLok hose end is included for connecting to an 8AN male aftermarket fuel rail fitting (not included). A 6AN (3\/8\") fuel hose runs from the FPR (not included) to the fuel pump hanger return port. A 6AN 90 degree PushLok hose end is included for connecting to a 6AN male aftermarket FPR fitting (not included). The fuel lines run though billet aluminum fuel brake line retainers. The fuel lines clear the OEM fuel pump cover and do not require any cutting or drilling to get them past the fuel tank. The feed and\/or return hose can be easily modified for installation of an in-line flex fuel sensor.\u003c\/p\u003e\n\u003cp\u003eThe included Radium Engineering fuel filter mounts in the stock filter location using a specifically designed Nissan bolt-on billet mount. A 6 micron Microglass fuel filter will is included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0730-00 Fuel Hanger Early Nissan Fits Walbro GSS342 or AEM 50-1200","offer_id":67591219216657,"sku":"20-0730-00","price":449.95,"currency_code":"USD","in_stock":true},{"title":"20-0732-00 Fuel Hanger Early Nissan Fits Walbro F90000267\/274\/285","offer_id":67591219249425,"sku":"20-0732-00","price":449.95,"currency_code":"USD","in_stock":true},{"title":"20-0703-05 Fuel Hanger Plumbing Kit Early Nissan Microglass","offer_id":67591219282193,"sku":"20-0703-05","price":529.95,"currency_code":"USD","in_stock":true},{"title":"20-0703-03 Fuel Hanger Plumbing Kit Early Nissan Stainless","offer_id":67591219314961,"sku":"20-0703-03","price":549.95,"currency_code":"USD","in_stock":true},{"title":"13-1187 Triple Pump Base, 12mm Inlet Brushless Pumps","offer_id":67591219347729,"sku":"13-1187","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0732-00.jpg?v=1790638008"},{"product_id":"radium-fuel-rail-nissan-rb20det","title":"Radium Fuel Rail, Nissan RB20DET — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0757 Fuel Rail Nissan RB20DET\u003c\/li\u003e\n\u003cli\u003e20-0217-PK Fuel Rail Plumbing Kit Nissan RB\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0757 FUEL RAIL, NISSAN RB20DET\u003c\/h4\u003e\n  \u003cdiv style=\"min-width:300px;float:left;\"\u003e\n    \u003cp\u003eThis Nissan RB20DET fuel rail is manufactured with a large 0.69\" internal bore, the fuel rail can support all necessary engine power requirements.\u003c\/p\u003e\n\u003cp\u003eThe rail is CNC machined from a custom 6063 aluminum extrusion and black anodized and laser etched for a high quality surface finish. It incorporates many lightweight features to go with the strong integrated gusset mounts, shown below.\u003cbr\u003e\u003cbr\u003eThe upper injector bores are machined with a common 11mm ID (Denso). Use the included O-rings if re-using the OEM injectors, otherwise the included O-rings will not be needed. As shown below, the front, rear, and center ports use 8AN ORB (3\/4\"-16 O-ring threads) to accept many adapter fittings for custom high flow fuel system builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf the OEM fuel pressure regulator will be reused, select the 20-0303 FPR Adapter \u003ca rel=\"noopener\" href=\"https:\/\/www.radiumauto.com\/products\/OEM-Fuel-Rail-Adapter-Fittings\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe rail is compatible with all fuel types including popular alcohol mixtures such as E85\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis fuel rail features three 8AN ORB ports, two located at the ends and one in the middle. It also features one 1\/8 NPT port.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e1\/8 NPT Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNOTE: This fuel rail does NOT come standard with fittings (see plumbing kit below).\u003c\/em\u003e\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"float:left;\"\u003e\n    \u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0757new.jpg\" style=\"width:240px;\" id=\"myImg\" class=\"myImages\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0217-PK FUEL RAIL PLUMBING KIT, NISSAN RB\u003c\/h4\u003e\n  \u003cdiv style=\"min-width:300px;float:left;\"\u003e\n     \u003cp\u003eThe plumbing kit permits a complete bolt-on affair for the fuel rail. Fuel hose is provided to connect the fuel filter to the rear of the fuel rail via a 6AN hose end and adapter fitting. A FPR adapter is provided to mount the OEM fuel pressure regulator to the front fuel rail port. Fuel hose is included to connect the FPR to the hard line on the frame rail. Stainless steel EFI clamps are included for securing all hose barbs. Plugs are provided for both the center port and the gauge port.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"float:left;\"\u003e\n    \u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0217-PK.jpg\" style=\"width:240px;\" id=\"myImg\" class=\"myImages\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0757 Fuel Rail Nissan RB20DET","offer_id":67591219380497,"sku":"20-0757","price":199.95,"currency_code":"USD","in_stock":true},{"title":"20-0217-PK Fuel Rail Plumbing Kit Nissan RB","offer_id":67591219413265,"sku":"20-0217-PK","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0757new.jpg?v=1790638009"},{"product_id":"radium-fuel-rail-nissan-rb25det-neo","title":"Radium Fuel Rail, Nissan RB25DET NEO","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0537 Fuel Rail Nissan RB25DET NEO\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis Radium Engineering fuel rail is CNC machined from extruded 6063 aluminum, black anodized, and laser etched for a high quality surface finish. Features a large 0.69' center bore that will easily support all stock and modified version of the RB25DET NEO.\u003cbr\u003eThe rails are compatible with all fuel types including popular alcohol mixtures such as E85.\u003c\/p\u003e\n\u003cp\u003eThis fuel rail is for the Nissan RB25DET NEO engine ONLY! This is commonly found in the R34 Skyline among others. For the Nissan RB25DET (non NEO) fuel rail, go \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-rail-top-feed-conversion-nissan-rb25det\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePRODUCT VIDEO\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/YBqFgmrG0s4\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePORTS AND FITTINGS\u003c\/h3\u003e\n\u003cp\u003eThis fuel rail features four 8AN ORB ports, two on the bottom and one at each end. O-ring style fittings must be used in these ports. No fittings are included with this fuel rail and must be purchased separately. Optionally, Radium \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\"\u003eFPD-R\u003c\/a\u003e fuel pulse dampers fit in the center fuel rail ports. \u003cbr\u003e\u003cbr\u003eThe fuel rail has four 8AN ORB threaded ports in total. Optionally, Radium \u003ca href=\"https:\/\/www.radiumauto.com\/Fuel-Pulse-Damper-Direct-Mount-Kits-P759.aspx\"\u003eFPD-R\u003c\/a\u003e fuel pulse dampers fit in the center fuel rail ports (as shown).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0537 Fuel Rail Nissan RB25DET NEO","offer_id":67591219446033,"sku":"20-0537","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0537new.jpg?v=1790638010"},{"product_id":"radium-fuel-rail-nissan-rb26dett","title":"Radium Fuel Rail, Nissan RB26DETT — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0217 Fuel Rail Nissan RB26DETT\u003c\/li\u003e\n\u003cli\u003e20-0217-PK Fuel Rail Plumbing Kit Nissan RB\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0217 FUEL RAIL, NISSAN RB26DETT\u003c\/h4\u003e\n\u003cdiv style=\"min-width: 300px; float: left;\"\u003e\n\u003cp\u003eThis 89-02 Nissan Skyline GT-R fuel rail is designed specifically for OEM (R32\/R33\/R34) RB26DETT intake manifolds. Manufactured with a large 0.69\" internal bore, the fuel rail can support all necessary engine power requirements. The rail is CNC machined from a custom 6063 aluminum extrusion and black anodized and laser etched for a high quality surface finish. The rail is compatible with all fuel types including popular alcohol mixtures such as E85.\u003c\/p\u003e\n\u003cp\u003eFor thermal insulation, press-fit machined spacers and washers are included to completely isolate the fuel rail from heat transfer via the manifold and mounting bolts.\u003c\/p\u003e\n\u003cp\u003eThis fuel rail features three 8AN ORB ports, two located at the ends and one in the middle. It also features one 1\/8NPT port.\u003c\/p\u003e\n\u003cp\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003cbr\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003cbr\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003cbr\u003e1\/8 NPT Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/NPT-National-Pipe-Thread-Fittings\"\u003eHERE\u003c\/a\u003e.\u003cbr\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003cp\u003eThe front, rear, and center ports use 8AN ORB (3\/4\"-16 O-ring threads) to accept many adapter fittings for custom high flow fuel system builds.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf the OEM fuel pressure regulator will be reused, select the 20-0303 FPR Adapter \u003ca href=\"https:\/\/www.radiumauto.com\/products\/OEM-Fuel-Rail-Adapter-Fittings\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe gauge port has 1\/8' NPT female threads commonly used for a fuel pressure gauge\/sensor or it can simply be plugged\u003c\/li\u003e\n\u003cli\u003eFor 1\/8' NPT fittings, \u003ca href=\"https:\/\/www.radiumauto.com\/products\/NPT-National-Pipe-Thread-Fittings\" rel=\"noopener\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor a Radium fuel pressure gauge, \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\" rel=\"noopener\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNOTE: This fuel rail does NOT come standard with fittings (see plumbing kit below).\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"float: leftt;\"\u003e\u003cimg id=\"myImg\" class=\"myImages\" style=\"width:240px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0217new.jpg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0217-PK FUEL RAIL PLUMBING KIT, NISSAN RB\u003c\/h4\u003e\n\u003cdiv style=\"min-width: 300px; float: left;\"\u003e\n\u003cp\u003eThe plumbing kit permits a complete bolt-on affair for the fuel rail. Fuel hose is provided to connect the fuel filter to the rear of the fuel rail via a 6AN hose end and adapter fitting. A FPR adapter is provided to mount the OEM fuel pressure regulator to the front fuel rail port. Fuel hose is included to connect the FPR to the hard line on the frame rail. Stainless steel EFI clamps are included for securing all hose barbs. Plugs are provided for both the center port and the gauge port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"float: left;\"\u003e\u003cimg id=\"myImg\" class=\"myImages\" style=\"width:240px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0217-PK.jpg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0217 Fuel Rail Nissan RB26DETT","offer_id":67591219478801,"sku":"20-0217","price":199.95,"currency_code":"USD","in_stock":true},{"title":"20-0217-PK Fuel Rail Plumbing Kit Nissan RB","offer_id":67591219511569,"sku":"20-0217-PK","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0217new.jpg?v=1790638010"},{"product_id":"radium-fuel-rail-top-feed-conversion-nissan-ka24de","title":"Radium Fuel Rail, Top Feed Conversion, Nissan KA24DE","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0957 Fuel Rail Top Feed Conversion Nissan KA24DE\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis Radium Engineering fuel rail is a direct bolt-on with all twin cam Nissan KA24DE engines. Manufactured with a large 0.69\" internal bore, the fuel rail can support all necessary engine power requirements. The Radium fuel rail converts the OEM side feed fuel injector setup to top feed allowing the use of high flow 14mm O-ring fuel injectors.\u003c\/p\u003e\n\u003cp\u003eThe rail is CNC machined from solid 6061 aluminum and black anodized making it compatible with all fuel types including E85.\u003c\/p\u003e\n\n\u003cp\u003eThis fuel rail features three ports that are tapped for 8AN ORB (ends and bottom)\u003cbr\u003eIt also has one 1\/8 NPT port (top)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca data-saferedirecturl=\"https:\/\/www.google.com\/url?q=https:\/\/radiumengineering.myshopify.com\/products\/8an-orb-fittings\u0026amp;source=gmail\u0026amp;ust=1540670113706000\u0026amp;usg=AFQjCNFdw3ke6gU5gBrauYX511VATYr_9A\" href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Direct Mount Regulators can be found \u003ca data-saferedirecturl=\"https:\/\/www.google.com\/url?q=https:\/\/radiumengineering.myshopify.com\/products\/DMR-RA-Direct-Mount-Regulator\u0026amp;source=gmail\u0026amp;ust=1540670113706000\u0026amp;usg=AFQjCNE-hfUQhGS56UwmqsY_T2DFvD-skQ\" href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca data-saferedirecturl=\"https:\/\/www.google.com\/url?q=https:\/\/radiumengineering.myshopify.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\u0026amp;source=gmail\u0026amp;ust=1540670113706000\u0026amp;usg=AFQjCNEAwfKra4DKejD4vp34EDTiFAMezw\" href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e1\/8 NPT Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/NPT-National-Pipe-Thread-Fittings\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca data-saferedirecturl=\"https:\/\/www.google.com\/url?q=https:\/\/radiumengineering.myshopify.com\/products\/fuel-pressure-gauge-0-100psi\u0026amp;source=gmail\u0026amp;ust=1540670113706000\u0026amp;usg=AFQjCNFSX4lE9yVWzdCvBYPXYE4RBzmyKA\" href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0957 Fuel Rail Top Feed Conversion Nissan KA24DE","offer_id":67591219544337,"sku":"20-0957","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0957.jpg?v=1790638011"},{"product_id":"radium-fuel-rail-top-feed-conversion-nissan-rb25det","title":"Radium Fuel Rail, Top Feed Conversion, Nissan RB25DET","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0277 Fuel Rail Top Feed Conversion Nissan RB25DET\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufactured with a large 0.69\" internal bore, the fuel rail can support all any engine power requirements. The Radium fuel rail converts the OEM side feed fuel injector setup to top feed injectors, allowing the use of a wide variety of aftermarket fuel injectors available on the market. This kit is compatible with E85. The fuel rail has four 8AN ORB ports that can be used for fuel inlet, outlet or for plumbing option accessories. All unused ports must be plugged. The rail is extruded and CNC machined from solid 6063 aluminum and black anodized for a high quality surface finish.\u003c\/p\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB fittings.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Direct Mount Regulators can be found \u003ca rel=\"noopener\" href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca rel=\"noopener\" href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca rel=\"noopener\" href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0277 Fuel Rail Top Feed Conversion Nissan RB25DET","offer_id":67591219577105,"sku":"20-0277","price":269.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0277n.jpg?v=1790638012"},{"product_id":"radium-fuel-rail-top-feed-conversion-nissan-sr20det-s13","title":"Radium Fuel Rail, Top Feed Conversion, Nissan SR20DET (S13)","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0558 Fuel Rail Top Feed Conversion Nissan SR20DET (S13)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis CNC machined fuel rail for the Nissan SR20DET features a large 0.69 inch internal bore and high flow ports that accept a wide variety of adapter fittings to suit any custom installation. The black satin anodized finish makes it safe to use with all blends of gasoline and alcohol fuels. It installs to the factory fuel rail mounting points and uses aftermarket top-feed fuel injectors.\u003c\/p\u003e\n\u003cp\u003eThis fuel rail features 3 large threaded ports (ends and one on the bottom) that are -8AN ORB female. It also has a 1\/8NPT female port on the top.\u003c\/p\u003e\n\u003cp\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\"\u003eHERE\u003c\/a\u003e\u003cbr\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\" rel=\"noopener\"\u003eHERE\u003c\/a\u003e\u003cbr\u003e1\/8 NPT Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/NPT-National-Pipe-Thread-Fittings\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\" rel=\"noopener\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003cbr\u003e\u003cbr\u003eThis fuel rail features an extra 8AN ORB port in the center on the bottom. This can be used as a location for a Radium FPD-R fuel pulse damper (P\/N 20-0776), as shown below. Fuel pulse dampers can be \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\" rel=\"noopener\" target=\"_blank\"\u003efound HERE\u003c\/a\u003e. Or this port can be plugged.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0558 Fuel Rail Top Feed Conversion Nissan SR20DET (S13)","offer_id":67591219609873,"sku":"20-0558","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0558.jpg?v=1790638013"},{"product_id":"radium-fuel-rail-top-feed-conversion-nissan-sr20det-s14-s15","title":"Radium Fuel Rail, Top Feed Conversion, Nissan SR20DET (S14\/S15)","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0359 Fuel Rail Top Feed Conversion Nissan SR20DET (S14\/S15)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufactured with a 0.69\" large internal bore, the fuel rail can support all necessary engine power requirements. The rail is CNC machined from solid 6061 aluminum and black anodized for a high quality surface finish. The included insulating spacers mount the rail to the OEM intake manifold bosses thermal isolation. The Radium fuel rail converts the OEM side feed fuel injector setup to top feed, allowing the use of high flow fuel injectors (not included). The fuel injector bores are 14mm ID. The kit is designed for specific upper and lower O-ring spacing, as depicted.\u003c\/p\u003e\n\u003cp\u003eTo resist oxidation corrosion, the lower billet aluminum injector seats are anodized and laser etched. They are O-ring sealed and designed for 14mm top feed injectors. This kit is compatible with all fuel types including popular alcohol mixtures such as E85.\u003c\/p\u003e\n\u003cp\u003eThe OEM 2-bolt IACV bypass hard line is replaced by a billet aluminum IACV spacer kit to gain clearance for the top feed fuel rail. An anodized aluminum barb adapter and rubber hose is supplied to reroute the charge pipe hose externally to the manifold. One gasket is included for the IACV spacer. To replace the original IACV gasket, go \u003ca href=\"https:\/\/www.radiumauto.com\/products\/iacv-gasket-nissan-sr20\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe fuel rail features three 8AN ORB ports.\u003c\/p\u003e\n\u003cp\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003cbr\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003cbr\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003cbr\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0359 Fuel Rail Top Feed Conversion Nissan SR20DET (S14\/S15)","offer_id":67591219642641,"sku":"20-0359","price":289.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0359n.jpg?v=1790638034"},{"product_id":"radium-fuel-rail-top-feed-conversion-nissan-sr20ve","title":"Radium Fuel Rail, Top Feed Conversion, Nissan SR20VE","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0331 Fuel Rail Top Feed Conversion Nissan SR20VE\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufactured with a large 0.69\" internal bore, the fuel rail can support all necessary engine power requirements. The Radium fuel rail converts the OEM side feed fuel injector setup to top feed allowing the use of high flow 14mm O-ring fuel injectors (not included). This rail is compatible with E85. The rail is extruded and CNC machined from solid 6063 aluminum and black anodized for a high quality surface finish. With the combination of the OEM insulating spacers and the included thermal insulating mounting washers, the fuel rail is 100% isolated from intake manifold heat transfer.\u003c\/p\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB fittings.\u003c\/p\u003e\n\u003cp\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\"\u003eHERE\u003c\/a\u003e.\u003cbr\u003e8AN ORB Direct Mount Regulators can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\"\u003eHERE\u003c\/a\u003e.\u003cbr\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\"\u003eHERE\u003c\/a\u003e.\u003cbr\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0331 Fuel Rail Top Feed Conversion Nissan SR20VE","offer_id":67591219675409,"sku":"20-0331","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0331n.jpg?v=1790638034"},{"product_id":"radium-fuel-rails-nissan-r35-gt-r-vr38dett","title":"Radium Fuel Rails, Nissan R35 GT-R VR38DETT — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0556-02 Fuel Rails Nissan R35 GT-R — Fuel Rails\u003c\/li\u003e\n\u003cli\u003e20-0956-PK Fuel Rail Plumbing Kit Nissan R35 GT-R — Plumbing Kit\u003c\/li\u003e\n\u003cli\u003e20-0459 FPD Adapter 8AN ORB 27mm Bore — OEM FPD Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0556-02 Fuel Rails Nissan R35 GT-R \u003c\/h4\u003e\n\u003cdiv style=\"min-width: 300px; float: left;\"\u003e\n\u003cp\u003eThese Radium Engineering fuel rails are compatible with the VR38DETT engine found in the Nissan R35 GT-R. They are machined from 6061 aluminum and anodized black for compatibility with all popular fuel types including E85. Manufactured with a large internal bore, the fuel rail can support all necessary engine power requirements. Each rail has four 8AN ORB ports (2 end ports and 2 top ports for a total of 8 ports).\u003c\/p\u003e\n\u003cp\u003eThe fuel rails mount with insulating spacers and washers for 100% fuel insulation from the hot intake manifold. The unique lower intake manifold mounting points permit shorter less restrictive rails. Additionally, the OEM injector clips can be reused, as shown below.\u003c\/p\u003e\n\u003cp\u003eWith 4 ports on each rail (8 total), it is easy to add fuel system accessories such as a pressure transducer, \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pulse-damper-direct-mount-kits\"\u003efuel pulse dampers\u003c\/a\u003e, etc. There is also opportunity to plumb the fuel rails in parallel or series.\u003c\/p\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB fittings.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"float: left;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 240px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0556-02a_61cd45f4-2d9b-4b0c-af7c-be062e16c595.jpg\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0956-PK Fuel Rail Plumbing, Nissan R35 GT-R\u003c\/h4\u003e\n\u003cdiv style=\"min-width: 300px; float: left;\"\u003e\n\u003cp\u003eWhen used with the 20-0556-02 fuel rails, this kit permits a bolt-on, plug and play affair. A stainless steel mount if provided for the Radium FPR. Low profile 90 degree SAE adapters with PTFE fuel hoses connect the OEM hard fuel lines to the FPR. PTFE fuel lines run from the FPR to the rear fuel rail ports. Two Radium fuel pulse dampers and a pressure gauge are included and all necessary adapter fittings. \u003cbr\u003e\u003c\/p\u003e\nThis kit is suitable with all gasoline types including unleaded, leaded, oxygenated, and pre-mixes. Furthermore, it is compatible with alcohol blends of fuel including methanol, ethanol, and E85.\u003c\/div\u003e\n\u003cdiv style=\"float: left;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 240px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0956-PK_new.jpg\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0459 FPD Adapter, 8AN ORB, 27mm Bore\u003c\/h4\u003e\n\u003cdiv style=\"min-width: 300px; float: left;\"\u003e\n\u003cp\u003eThe OEM VR38DETT fuel pulse damper can be reused with this adapter. These can install into any fuel rail port provided there is adequate clearance.\u003c\/p\u003e\n\u003cp\u003eIf the 20-0956-PK plumbing kit was purchased, this adapter can be used in the spare top port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"float: left;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 240px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0459_2f2ff495-e527-4ae3-add1-7a76b35f354f.jpg\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0556-02 Fuel Rails Nissan R35 GT-R","offer_id":67591219708177,"sku":"20-0556-02","price":349.95,"currency_code":"USD","in_stock":true},{"title":"20-0956-PK Fuel Rail Plumbing Kit Nissan R35 GT-R","offer_id":67591219740945,"sku":"20-0956-PK","price":649.95,"currency_code":"USD","in_stock":true},{"title":"20-0459 FPD Adapter 8AN ORB 27mm Bore","offer_id":67591219773713,"sku":"20-0459","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0556-02a_a1fc926e-b3d0-47ac-afd0-b1051107fdba.jpg?v=1790638035"},{"product_id":"radium-fuel-rails-nissan-vq","title":"Radium Fuel Rails, Nissan VQ — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0458 Fuel Rails Nissan VQ — Fuel Rails\u003c\/li\u003e\n\u003cli\u003e20-0468 Fuel Rail Plumbing Nissan VQ35DE — Plumbing Kit\u003c\/li\u003e\n\u003cli\u003e20-0469 Fuel Rail Plumbing Nissan VQ35HR and VQ37VHR — Plumbing Kit\u003c\/li\u003e\n\u003cli\u003e20-0459 FPD Adapter 8AN ORB 27mm Bore — OEM FPD Adapters\u003c\/li\u003e\n\u003cli\u003e20-0460 FPD Adapter 8AN ORB 11mm Bore 42mm Spacing M6 — OEM FPD Adapters\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0458 Fuel Rails Nissan VQ\u003c\/h4\u003e\n  \u003cdiv style=\"min-width:300px;float:left;\"\u003e\n\u003cp\u003eThe fuel rails are machined from 6061 aluminum and anodized black for compatibility with all popular fuel types including E85. Manufactured with a large internal bore, the fuel rail can support all necessary engine power requirements. Each rail has four 8AN ORB ports (2 end ports and 2 bottom ports). The fuel rail features 14mm injector bores and is compatible with the OEM injectors and any aftermarket injectors with OEM VQ fitment.\u003c\/p\u003e\n\u003cp\u003eThe fuel rails mount with stainless steel brackets and hardware. The unique mounts permit fitment with all VQ engines. Additionally, the OEM injector clips can be reused for the VQ35HR and VQ35DE, as shown below.\u003c\/p\u003e\n\u003cp\u003eWith 4 ports on each rail (8 total), it is easy to add fuel system accessories such as a pressure transducer, \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pulse-damper-direct-mount-kits\"\u003efuel pulse dampers\u003c\/a\u003e, etc. There is also opportunity to plumb the fuel rails in several different configurations, including parallel, series, or a return system. NOTE: Because of the OEM intake manifold mounting bosses, two \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\"\u003eRadium 14-0150\u003c\/a\u003e 8AN ORB plugs must be used in 1 of each of the center ports for VQ35DE engines ONLY.\u003c\/p\u003e\n\u003cp\u003eThe fuel rail ports are tapped for 8AN ORB fittings.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8AN ORB Adapter Fittings can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/8an-orb-fittings\" rel=\"noopener\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e8AN ORB Fuel Pulse Dampers can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\" rel=\"noopener\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Gauge Adapters can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.\u003c\/p\u003e    \n      \u003c\/div\u003e\n  \u003cdiv style=\"float:leftt;\"\u003e\n\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 240px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/4193\/7449\/files\/20-0458.jpg\" alt=\"\"\u003e    \n  \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0468 Fuel Rail Plumbing, Nissan VQ35DE\u003c\/h4\u003e\n  \u003cdiv style=\"min-width:300px;float:left;\"\u003e\n\u003cp\u003eWhen used with the above fuel rail kit, this plumbing kit permits a bolt-on, plug and play affair for VQ35DE engines.\u003c\/p\u003e\n\u003cp\u003e An SAE adapter connects to the OEM hard line underneath the vehicle. PTFE hoses route fuel to the rear fuel rail ports. 8AN ORB plugs and 6AN adapter fittings are included for all fuel rail ports. Additionally, 20-0460 is included to allow the OEM fuel pulse damper to be reused.\u003c\/p\u003e    \n  \u003c\/div\u003e\n  \u003cdiv style=\"float:left;\"\u003e\n\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 240px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/4193\/7449\/files\/20-0468.jpg\" alt=\"\"\u003e    \n  \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0469 Fuel Rail Plumbing, Nissan VQ35HR and VQ37VHR\u003c\/h4\u003e\n  \u003cdiv style=\"min-width:300px;float:left;\"\u003e\n\u003cp\u003eWhen used with fuel rail kit above, this plumbing kit permits a bolt-on, plug and play affair for both VQ35HR and VQ37VHR engines.\u003c\/p\u003e\n\u003cp\u003eAn SAE adapter connects to the OEM hard line underneath the vehicle. PTFE hoses route fuel to the front fuel rail ports. 8AN ORB plugs and 6AN adapter fittings are included for all fuel rail ports. Additionally, two of the 20-0459 adapters are included to allow the OEM fuel pulse dampers to be reused.\u003c\/p\u003e    \n  \u003c\/div\u003e\n  \u003cdiv style=\"float:left;\"\u003e\n\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 240px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/4193\/7449\/files\/20-0469.jpg\" alt=\"\"\u003e    \n  \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0459 FPD Adapter, 8AN ORB, 27mm Bore\u003c\/h4\u003e\n  \u003cdiv style=\"min-width:300px;float:left;\"\u003e\n\u003cp\u003eThe OEM VQ35HR and VQ37VHR fuel pulse dampers can be reused with these adapters. One is required for each fuel pulse damper.  These can only be installed in very specific locations on the Radium Fuel Rail Kit where there is adequate clearance. See the chart below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf the 20-0469 plumbing kit (listed above) was purchased, these adapters are already included and do not need to be ordered separately.\u003c\/li\u003e\n\u003cli\u003eUse the 20-0460 OEM FPD adapter for the VQ35DE engine.\u003c\/li\u003e\n\u003cli\u003eThe VQ37VHR engine is NOT compatible with any Radium aftermarket dampers. Only the OEM dampers can be used used with our fuel rails.\u003c\/li\u003e\n\u003c\/ul\u003e    \n  \u003c\/div\u003e\n  \u003cdiv style=\"float:left;\"\u003e\n\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 240px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/4193\/7449\/files\/20-0459_2f2ff495-e527-4ae3-add1-7a76b35f354f.jpg\"\u003e    \n  \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0460 FPD Adapter, 8AN ORB, 11mm Bore, 39mm Spacing, M6\u003c\/h4\u003e\n  \u003cdiv style=\"min-width:300px;float:left;\"\u003e\n\u003cp\u003eOne is required for each fuel pulse damper.  These can only be installed in very specific locations on the Radium Fuel Rail Kit where there is adequate clearance. See the chart below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf the 20-0468 plumbing kit (listed above) was purchased, this adapter is already included and thus, not necessary.\u003c\/li\u003e\n\u003cli\u003eUse the 20-0459 OEM FPD adapters for the VQ35HR and VQ37VHR engines.\u003c\/li\u003e\n\u003cli\u003eRadium \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pulse-damper-direct-mount-kits\"\u003edirect-mount pulse dampers\u003c\/a\u003e are also compatible in some of the 8AN ORB ports in the VQ35DE and VQ35HR engine, as shown in the chart.\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"float:left;\"\u003e\n\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 240px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/4193\/7449\/files\/20-0460n_40ee200d-7d7e-415e-9a4f-3d2229f2acfb.jpg\" alt=\"\"\u003e    \n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0458 Fuel Rails Nissan VQ","offer_id":67591219806481,"sku":"20-0458","price":299.95,"currency_code":"USD","in_stock":true},{"title":"20-0468 Fuel Rail Plumbing Nissan VQ35DE","offer_id":67591219839249,"sku":"20-0468","price":219.95,"currency_code":"USD","in_stock":true},{"title":"20-0469 Fuel Rail Plumbing Nissan VQ35HR and VQ37VHR","offer_id":67591219872017,"sku":"20-0469","price":219.95,"currency_code":"USD","in_stock":true},{"title":"20-0459 FPD Adapter 8AN ORB 27mm Bore","offer_id":67591219904785,"sku":"20-0459","price":29.95,"currency_code":"USD","in_stock":true},{"title":"20-0460 FPD Adapter 8AN ORB 11mm Bore 42mm Spacing M6","offer_id":67591219937553,"sku":"20-0460","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0458n.jpg?v=1790638036"},{"product_id":"radium-iacv-gasket-nissan-sr20","title":"Radium IACV Gasket, Nissan SR20","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e18-0014 IACV Gasket Nissan SR20\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis gasket is compatible with the Idle Air Control Valve (IACV)found on the Nissan S14\/S15 SR20DET and SR20VE engine. This CNC knife cut gasket is made from Kevlar and is combined with Nitrile rubber for fuel and oil resistance.\u003c\/p\u003e\n\u003cp\u003eNOTE: The OEM Nissan IACV gasket (P\/N: 23785-2J200) has been discontinued.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"18-0014 IACV Gasket Nissan SR20","offer_id":67591219970321,"sku":"18-0014","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/IACV_Gasket-2.jpg?v=1790638036"},{"product_id":"radium-iacv-spacer-sr20det-s14-s15","title":"Radium IACV Spacer, SR20DET (S14\/S15)","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0162 IACV Spacer SR20DET (S14\/S15)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis Idle Air Control Valve (IACV) Spacer is compatible with the SR20DET engine commonly found in the Nissan Silvia S14\/S15 chassis. The OEM 2-bolt IACV bypass hard line is replaced by this anodized aluminum IACV spacer kit to gain clearance for top feed fuel rails. An anodized aluminum barb adapter and rubber hose is supplied to reroute the charge pipe hose externally to the manifold. Three stainless steel bolts and one IACV gasket are also included.\u003c\/p\u003e\n\u003cp\u003eTo purchase an additional gasket to replace your original IACV gasket, go \u003ca href=\"https:\/\/www.radiumauto.com\/products\/iacv-gasket-nissan-sr20\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0162 IACV Spacer SR20DET (S14\/S15)","offer_id":67591220003089,"sku":"20-0162","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0162.jpg?v=1790638038"},{"product_id":"radium-nissan-retainer-kits-for-fuel-brake-and-hicas-lines","title":"Radium Retainer Kits, Nissan Fuel, Brake, and HICAS Lines — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0626 Fuel Brake Line Retainer Kit Nissan\u003c\/li\u003e\n\u003cli\u003e20-0627 HICAS Line Retainer Kit Nissan\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe fuel and brake line retainers consist of billet aluminum clamps that replace the plastic retainers that secure the OEM hard lines underneath Nissan vehicles, for use when installing larger aftermarket feed and return hoses.\u003c\/p\u003e\n\u003cp\u003eThe HICAS retainer kits are only for Nissan vehicles that use HICAS (High Capacity Actively Controlled Steering) on the rear wheels. The HICAS lines share the same plastic retainers as the fuel and brake lines. If these retainers are ever removed, the HICAS lines will be left hanging. This kit is perfectly compliments the the 20-0626 Fuel Brake Line Retainer Kit. \u003cspan\u003eWhen installing the HICAS retainer kit, equally space all 5 clamps as shown above. Because the 2 HICAS lines are rigidly secured to the chassis in the front and the rear, these clamps do not secure to the unibody. They are already rigid enough to not sag.\u003c\/span\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0626 Fuel Brake Line Retainer Kit Nissan","offer_id":67591220035857,"sku":"20-0626","price":269.95,"currency_code":"USD","in_stock":true},{"title":"20-0627 HICAS Line Retainer Kit Nissan","offer_id":67591220068625,"sku":"20-0627","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0626.jpg?v=1790638038"},{"product_id":"radium-swivel-press-in-fittings-nissan-valve-covers","title":"Radium Press-in Valve Cover Fittings for Nissan Engines — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0808 10AN Male Press-Fit RB25DET SR20DET S14\/S15 Intake\u003c\/li\u003e\n\u003cli\u003e20-0809 12AN Male Press-Fit RB26DETT Intake or Exhaust\u003c\/li\u003e\n\u003cli\u003e20-0810 10AN Male Press-Fit KA24DE Intake\u003c\/li\u003e\n\u003cli\u003e20-0811 10AN Male Press-Fit SR20DET S13 Exhaust\u003c\/li\u003e\n\u003cli\u003e20-0812 10AN Male Press-Fit SR20DET S14\/S15 Exhaust\u003c\/li\u003e\n\u003cli\u003e20-0813 10AN Male Press-Fit RB20DET RB25DET Intake or Exhaust\u003c\/li\u003e\n\u003cli\u003e20-0739 Double SAE Male Swivel to Press-Fit RB26DETT Intake or Exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0808 10AN Male Press-Fit RB25DET SR20DET S14\/S15 Intake\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0808a.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis low profile 10AN fitting is a direct replacement for the PCV valve on the intake side of the valve cover. \u003cstrong style=\"font-size: 0.875rem;\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0809 12AN Male Press-Fit RB26DETT Intake or Exhaust\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0809.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis low profile 12AN fitting is a direct replacement for both Nissan RB26DETT valve cover fittings.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0810 10AN Male Press-Fit KA24DE Intake\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0810.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis low profile 10AN fitting is a direct replacement for the valve cover barb found on the intake side of the Nissan KA24DE S13\/S14 valve cover.\u003c\/p\u003e\n\u003cp\u003eThis fitting has a slight angle on the flange in an attempt to match the casting draft angle on the KA24DE valve cover. It is normal for there to be a slight gap after installing. When installing into the valve cover, the flat spot (shown in blue) should be facing upwards.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0811 10AN Male Press-Fit SR20DET S13 Exhaust\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0811.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis low profile double ended 10AN banjo fitting is a direct replacement for the valve cover barbs found on the exhaust side of the Nissan SR20DET S13 valve cover.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0812 10AN Male Press-Fit SR20DET S14\/S15 Exhaust\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/S14_S15_SR20DET_Exhaust_Press-In.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis low profile 10AN banjo fitting is a direct replacement for the valve cover barb found on the exhaust side of the Nissan SR20DET S14\/S15 valve cover.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0813 10AN Male Press-Fit RB20DET RB25DET Intake or Exhaust\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0812.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis low profile 10AN banjo fitting is a direct replacement for the intake and exhaust crankcase fittings found on Nissan RB20DET and all RB25DET valve covers (NEO and non NEO). These ports are located on top of the valve covers towards the front.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo replace the PCV valve that connects on the side of the RB25DET intake valve cover, use 20-0808.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0739 Double SAE Male Swivel to Press-Fit RB26DETT Intake or Exhaust\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0739.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis double-ended 16mm SAE quick connect fitting is a direct replacement for Nissan RB26DETT valve cover fittings. \u003c\/p\u003e\n\u003cp\u003eThese are perfect for balancing the intake and exhaust valve cover vent ports. Compatible with Radium Engineering SAE quick connect hose ends \u003ca href=\"https:\/\/www.radiumauto.com\/products\/SAE-Quick-Connect-Adapter-Fittings\"\u003e14-0627\u003c\/a\u003e and \u003ca href=\"https:\/\/www.radiumauto.com\/products\/SAE-Quick-Connect-Adapter-Fittings\"\u003e14-0628\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThere is one on the intake valve cover and one on the exhaust valve cover.\u003c\/li\u003e\n\u003cli\u003eIf replacing both OEM fittings, quantity 2 must be purchased.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"20-0808 10AN Male Press-Fit RB25DET SR20DET S14\/S15 Intake","offer_id":67591220101393,"sku":"20-0808","price":59.95,"currency_code":"USD","in_stock":true},{"title":"20-0809 12AN Male Press-Fit RB26DETT Intake or Exhaust","offer_id":67591220134161,"sku":"20-0809","price":59.95,"currency_code":"USD","in_stock":true},{"title":"20-0810 10AN Male Press-Fit KA24DE Intake","offer_id":67591220166929,"sku":"20-0810","price":59.95,"currency_code":"USD","in_stock":true},{"title":"20-0811 10AN Male Press-Fit SR20DET S13 Exhaust","offer_id":67591220199697,"sku":"20-0811","price":59.95,"currency_code":"USD","in_stock":true},{"title":"20-0812 10AN Male Press-Fit SR20DET S14\/S15 Exhaust","offer_id":67591220232465,"sku":"20-0812","price":59.95,"currency_code":"USD","in_stock":true},{"title":"20-0813 10AN Male Press-Fit RB20DET RB25DET Intake or Exhaust","offer_id":67591220265233,"sku":"20-0813","price":59.95,"currency_code":"USD","in_stock":true},{"title":"20-0739 Double SAE Male Swivel to Press-Fit RB26DETT Intake or Exhaust","offer_id":67591220298001,"sku":"20-0739","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0808b.jpg?v=1790638039"},{"product_id":"radium-transmission-filter-nissan-r35-gt-r-stainless","title":"Radium Transmission Filter, Nissan R35 GT-R, Stainless","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e18-0028 Transmission Filter Nissan R35 GT-R Stainless\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe Radium transmission filter was designed specifically for the GR6 transmission found in the 2007+ Nissan R35 GT-R. The unique internal bypass valve uses a progressive disc mechanism and was developed to work efficiently with stock or heavily modified applications. Like OEM, the Radium filter includes an integrated diffuser that evenly distributes oil flow over the entire element.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eINDEPENDENT INSTALLATION VIDEO\u003c\/h3\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/cUfdHOfTxXk?si=0F3el0dDeaHVmApZ\u0026amp;start=1741\" allowfullscreen\u003e\u003c\/iframe\u003e","brand":"Radium Engineering","offers":[{"title":"18-0028 Transmission Filter Nissan R35 GT-R Stainless","offer_id":67591220330769,"sku":"18-0028","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/18-0028new.jpg?v=1790638040"},{"product_id":"radium-master-cylinder-brace-nissan-r32-skyline","title":"Radium Master Cylinder Brace, Nissan R32 Skyline","description":"\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20-0586 Master Cylinder Brace Nissan R32 Skyline\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eWhen the brake pedal is depressed, not all the mechanical energy is transferred into hydraulic brake line pressure. Unfortunately some of the energy is wasted flexing the thin firewall. With the Radium Engineering master cylinder brace, firewall flexing is eliminated allowing all of the brake pedal input force to be applied for stopping the vehicle. This enables a firmer pedal feel and more responsive brake system.\u003c\/p\u003e\n\u003cp\u003eThe Radium Engineering brake master cylinder brace installs on the strut tower (RHD) and provides needed support and immediate response for hard braking. The billet aluminum design is lightweight yet very stiff. Because it is a 1-piece design, there are no unwanted secondary flexing created by inferior multi-piece designs. Furthermore, it utilizes 3 mounting points on different planes that promote reinforcement.\u003c\/p\u003e\n\u003cp\u003ePhysically, the brace is very streamline supporting aftermarket modifications mounted near the strut tower. The strategically selected adjustment screw prevents damage to the master cylinder housing with the use of a large diameter aluminum head. The included stainless steel \"easy-on\" lock nut prohibits any potential slippage of the set preload.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"20-0586 Master Cylinder Brace Nissan R32 Skyline","offer_id":67591220363537,"sku":"20-0586","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/20-0586.jpg?v=1790638040"},{"product_id":"radium-fuel-delivery-system-nissan-r32-skyline-gt-r","title":"Radium Fuel Delivery System, Nissan R32 Skyline GT-R — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0217 Fuel Rail Nissan RB26DETT — Required Items\u003c\/li\u003e\n\u003cli\u003e14-0152 8AN ORB to 8AN Male — Required Items\u003c\/li\u003e\n\u003cli\u003e20-0029 Fuel Pressure Gauge 0-100psi — Required Items\u003c\/li\u003e\n\u003cli\u003e20-0776 FPD-R 8AN ORB — Required Items\u003c\/li\u003e\n\u003cli\u003e20-0740-00 FHST R32 GT-R Fits Walbro GSS342 or AEM 50-1200 — Choose Pump Hanger\u003c\/li\u003e\n\u003cli\u003e20-0741-00 FHST R32 GT-R Fits Ti Automotive E5LM — Choose Pump Hanger\u003c\/li\u003e\n\u003cli\u003e20-0742-00 FHST R32 GT-R Fits Walbro F90000267\/274\/285 — Choose Pump Hanger\u003c\/li\u003e\n\u003cli\u003e20-0703-03 Fuel Hanger Plumbing Kit Early Nissan Stainless — Choose Plumbing Kit (Filter Type)\u003c\/li\u003e\n\u003cli\u003e20-0703-05 Fuel Hanger Plumbing Kit Early Nissan Microglass — Choose Plumbing Kit (Filter Type)\u003c\/li\u003e\n\u003cli\u003e20-1623-00 DMR Direct Mount Regulator, Black — Choose Regulator\u003c\/li\u003e\n\u003cli\u003e20-1623-01 DMR Direct Mount Regulator, Green — Choose Regulator\u003c\/li\u003e\n\u003cli\u003eWalbro F90000274 — Lift Pump\u003c\/li\u003e\n\u003cli\u003eTi Automotive BKS1001 — Lift Pump\u003c\/li\u003e\n\u003cli\u003e17-0031 DIY Fuel Pump Wiring Kit — DIY Wiring Kits (1 per pump)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis comprehensive kit includes all the Radium Engineering components required to construct a high performance fuel delivery system for the Nissan R32 Skyline GT-R. \u003c\/p\u003e\n\u003cp\u003eThe in-tank fuel hanger surge tank replaces the factory unit and can be configured with a variety of different fuel pump options. More details on the 20-074X-0X fuel hanger can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-hanger-surge-tank-r32-skyline-gt-r\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe fuel lines, a high flow fuel filter, AN fittings, and undercarriage hard line retainers replace all OEM components. More details on the 20-0703-0X fuel hanger plumbing kits can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-hanger-surge-tank-r32-skyline-gt-r\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFuel enters the RB26DETT engine through a 8AN fitting on the inlet of a high flow RB26DETT fuel rail. More details on the 20-0217 fuel rail can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-rails-nissan-r35-gt-r-vr38dett\"\u003eHERE.\u003c\/a\u003e NOTE: Fuel Injectors are required.\u003c\/p\u003e\n\u003cp\u003eUnwanted pressure spikes are controlled through a fuel pulse damper. More details on the 20-0776 FPD-R can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe included FPR regulates fuel pressure with boost pressure at a 1:1 ratio. More details on the 20-1623-00 DMR can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe DMR is monitored and adjusted using a 0-100psi gauge. More details regarding the 20-0029 gauge can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eHOW TO ORDER\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRequired items are preselected. If you already have any of the parts with check boxes next to them, you can uncheck them to remove them from the package\u003c\/li\u003e\n\u003cli\u003eSelect a fuel pump hanger that matches the part number of the fuel pump(s) you wish to install into it.\u003c\/li\u003e\n\u003cli\u003eSelect the fuel hanger plumbing kit by filter type. Stainless are 10 micron and Microglass are a finer 6 micron filtration. Stainless filters have elements that can be cleaned and reused.\u003c\/li\u003e\n\u003cli\u003eChoose your fuel pumps, make sure that they match the hanger selected earlier. If using a pump not available from Radium, choose none to receive no pumps. Pumps will NOT come preinstalled into the hanger: assembly is required.\u003c\/li\u003e\n\u003cli\u003eDIY fuel pump wiring kits are preselected. If you do not need both wiring kits, deselect the ones you do not want.\u003c\/li\u003e\n\u003cli\u003eAfter all selections are made double check them for accuracy and add item to cart and proceed to checkout.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"20-0217 Fuel Rail Nissan RB26DETT","offer_id":67591220396305,"sku":"20-0217","price":199.95,"currency_code":"USD","in_stock":true},{"title":"14-0152 8AN ORB to 8AN Male","offer_id":67591220429073,"sku":"14-0152","price":9.95,"currency_code":"USD","in_stock":true},{"title":"20-0029 Fuel Pressure Gauge 0-100psi","offer_id":67591220461841,"sku":"20-0029","price":49.95,"currency_code":"USD","in_stock":true},{"title":"20-0776 FPD-R 8AN ORB","offer_id":67591220494609,"sku":"20-0776","price":89.95,"currency_code":"USD","in_stock":true},{"title":"20-0740-00 FHST R32 GT-R Fits Walbro GSS342 or AEM 50-1200","offer_id":67591220527377,"sku":"20-0740-00","price":789.95,"currency_code":"USD","in_stock":true},{"title":"20-0741-00 FHST R32 GT-R Fits Ti Automotive E5LM","offer_id":67591220560145,"sku":"20-0741-00","price":819.95,"currency_code":"USD","in_stock":true},{"title":"20-0742-00 FHST R32 GT-R Fits Walbro F90000267\/274\/285","offer_id":67591220592913,"sku":"20-0742-00","price":819.95,"currency_code":"USD","in_stock":true},{"title":"20-0703-03 Fuel Hanger Plumbing Kit Early Nissan Stainless","offer_id":67591220625681,"sku":"20-0703-03","price":549.95,"currency_code":"USD","in_stock":true},{"title":"20-0703-05 Fuel Hanger Plumbing Kit Early Nissan Microglass","offer_id":67591220658449,"sku":"20-0703-05","price":529.95,"currency_code":"USD","in_stock":true},{"title":"20-1623-00 DMR Direct Mount Regulator, Black","offer_id":67591220691217,"sku":"20-1623-00","price":179.95,"currency_code":"USD","in_stock":true},{"title":"20-1623-01 DMR Direct Mount Regulator, Green","offer_id":67591220723985,"sku":"20-1623-01","price":179.95,"currency_code":"USD","in_stock":true},{"title":"Walbro F90000274","offer_id":67591220756753,"sku":"WALB F90000274","price":124.95,"currency_code":"USD","in_stock":true},{"title":"Ti Automotive BKS1001","offer_id":67591220789521,"sku":"TI BKS1001-4","price":799.95,"currency_code":"USD","in_stock":true},{"title":"17-0031 DIY Fuel Pump Wiring Kit","offer_id":67591220822289,"sku":"17-0031","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/R32_GT-R_Fuel_Delivery_Parts.jpg?v=1790638048"},{"product_id":"radium-fuel-delivery-system-nissan-r33-r34-skyline-gt-r","title":"Radium Fuel Delivery System, Nissan R33\/R34 Skyline GT-R — Parts \u0026 Options","description":"\u003cp\u003e\u003cstrong\u003eParts are sold separately.\u003c\/strong\u003e Select the exact part number below. Each selection adds only that part to your cart; add other required components separately. Photos and application details may show a complete system or optional accessories.\u003c\/p\u003e\u003ch3\u003eAvailable part numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20-0217 Fuel Rail Nissan RB26DETT — Required Items\u003c\/li\u003e\n\u003cli\u003e14-0152 8AN ORB to 8AN Male — Required Items\u003c\/li\u003e\n\u003cli\u003e20-0776 FPD-R 8AN ORB — Required Items\u003c\/li\u003e\n\u003cli\u003e20-0029 Fuel Pressure Gauge 0-100psi — Required Items\u003c\/li\u003e\n\u003cli\u003e20-0630-00 Fuel Hanger Late Nissan Fits Walbro GSS342 or AEM 50-1200 — Choose Pump Hanger\u003c\/li\u003e\n\u003cli\u003e20-0632-00 Fuel Hanger Late Nissan Fits Walbro F90000267\/274\/285 or E5LM — Choose Pump Hanger\u003c\/li\u003e\n\u003cli\u003e20-0700 FHST Add-On Late Nissan Fits Walbro GSS342 or AEM 50-1200 — Choose FHST Add-On (Optional)\u003c\/li\u003e\n\u003cli\u003e20-0701 FHST Add-On Late Nissan Fits Walbro F90000267\/274\/285 or E5LM — Choose FHST Add-On (Optional)\u003c\/li\u003e\n\u003cli\u003e20-0702-03 Fuel Hanger Plumbing Kit Late Nissan Stainless — Choose Plumbing Kit (Filter Type)\u003c\/li\u003e\n\u003cli\u003e20-0702-05 Fuel Hanger Plumbing Kit Late Nissan Microglass — Choose Plumbing Kit (Filter Type)\u003c\/li\u003e\n\u003cli\u003e20-1623-00 DMR Direct Mount Regulator, Black — Choose Regulator\u003c\/li\u003e\n\u003cli\u003e20-1623-01 DMR Direct Mount Regulator, Green — Choose Regulator\u003c\/li\u003e\n\u003cli\u003eWalbro F90000274 — Choose Lift Pump\u003c\/li\u003e\n\u003cli\u003eWalbro F90000295 — Choose Lift Pump\u003c\/li\u003e\n\u003cli\u003eTi Automotive BKS1001 — Choose Lift Pump\u003c\/li\u003e\n\u003cli\u003eWalbro GSS342 — Choose Lift Pump\u003c\/li\u003e\n\u003cli\u003e17-0031 DIY Fuel Pump Wiring Kit — DIY Wiring Kits (1 per pump)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis comprehensive kit includes all the Radium Engineering components required to construct a high performance fuel delivery system for the Nissan R33\/R34 Skyline GT-R. \u003c\/p\u003e\u003cp\u003eThe in-tank fuel hanger replaces the factory unit and can be configured with a variety of different fuel pump options. More details on the 20-063X-0X fuel hanger can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pump-hanger-and-fhst-late-nissan\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eAn optional fuel hanger surge tank add-on can be configured with a variety of different fuel pump options. More details on the 20-070X fuel hanger surge tank can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pump-hanger-and-fhst-late-nissan\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThe fuel lines, a high flow fuel filter, AN fittings, and undercarriage hard line retainers replace all OEM components. More details on the 20-0702-0X fuel hanger plumbing kits can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pump-hanger-and-fhst-late-nissan\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eFuel enters the RB26DETT engine through a 8AN fitting on the inlet of a high flow RB26DETT fuel rail. More details on the 20-0217 fuel rail can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-rails-nissan-r35-gt-r-vr38dett\"\u003eHERE.\u003c\/a\u003e NOTE: Fuel Injectors are required.\u003c\/p\u003e\u003cp\u003eUnwanted pressure spikes are controlled through a fuel pulse damper. More details on the 20-0776 FPD-R can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/Fuel-Pulse-Damper-Direct-Mount-Kits\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThe included FPR regulates fuel pressure with boost pressure at a 1:1 ratio. More details on the 20-1623-00 DMR can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/DMR-RA-Direct-Mount-Regulator\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThe DMR is monitored and adjusted using a 0-100psi gauge. More details regarding the 20-0029 gauge can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/fuel-pressure-gauge-0-100psi\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eHOW TO ORDER\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRequired items are preselected. If you already have any of the parts with check boxes next to them, you can uncheck them to remove them from the package\u003c\/li\u003e\n\u003cli\u003eSelect a fuel pump hanger that matches the part number of the fuel pump(s) you wish to install into it.\u003c\/li\u003e\n\u003cli\u003eSelect the fuel hanger plumbing kit by filter type. Stainless are 10 micron and Microglass are a finer 6 micron filtration. Stainless filters have elements that can be cleaned and reused.\u003c\/li\u003e\n\u003cli\u003eChoose your fuel pumps, make sure that they match the hanger selected earlier. If using a pump not available from Radium, choose none to receive no pumps. Pumps will NOT come preinstalled into the hanger: assembly is required.\u003c\/li\u003e\n\u003cli\u003eDIY fuel pump wiring kits are preselected. If you do not need both wiring kits, deselect the ones you do not want.\u003c\/li\u003e\n\u003cli\u003eAfter all selections are made double check them for accuracy and add item to cart and proceed to checkout.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"20-0217 Fuel Rail Nissan RB26DETT","offer_id":67591220855057,"sku":"20-0217","price":199.95,"currency_code":"USD","in_stock":true},{"title":"14-0152 8AN ORB to 8AN Male","offer_id":67591220887825,"sku":"14-0152","price":9.95,"currency_code":"USD","in_stock":true},{"title":"20-0776 FPD-R 8AN ORB","offer_id":67591220920593,"sku":"20-0776","price":89.95,"currency_code":"USD","in_stock":true},{"title":"20-0029 Fuel Pressure Gauge 0-100psi","offer_id":67591220953361,"sku":"20-0029","price":49.95,"currency_code":"USD","in_stock":true},{"title":"20-0630-00 Fuel Hanger Late Nissan Fits Walbro GSS342 or AEM 50-1200","offer_id":67591220986129,"sku":"20-0630-00","price":529.95,"currency_code":"USD","in_stock":true},{"title":"20-0632-00 Fuel Hanger Late Nissan Fits Walbro F90000267\/274\/285 or E5LM","offer_id":67591221018897,"sku":"20-0632-00","price":529.95,"currency_code":"USD","in_stock":true},{"title":"20-0700 FHST Add-On Late Nissan Fits Walbro GSS342 or AEM 50-1200","offer_id":67591221051665,"sku":"20-0700","price":399.95,"currency_code":"USD","in_stock":true},{"title":"20-0701 FHST Add-On Late Nissan Fits Walbro F90000267\/274\/285 or E5LM","offer_id":67591221084433,"sku":"20-0701","price":399.95,"currency_code":"USD","in_stock":true},{"title":"20-0702-03 Fuel Hanger Plumbing Kit Late Nissan Stainless","offer_id":67591221117201,"sku":"20-0702-03","price":619.95,"currency_code":"USD","in_stock":true},{"title":"20-0702-05 Fuel Hanger Plumbing Kit Late Nissan Microglass","offer_id":67591221149969,"sku":"20-0702-05","price":599.95,"currency_code":"USD","in_stock":true},{"title":"20-1623-00 DMR Direct Mount Regulator, Black","offer_id":67591221182737,"sku":"20-1623-00","price":179.95,"currency_code":"USD","in_stock":true},{"title":"20-1623-01 DMR Direct Mount Regulator, Green","offer_id":67591221215505,"sku":"20-1623-01","price":179.95,"currency_code":"USD","in_stock":true},{"title":"Walbro F90000274","offer_id":67591221248273,"sku":"WALB F90000274","price":124.95,"currency_code":"USD","in_stock":true},{"title":"Walbro F90000295","offer_id":67591221281041,"sku":"WALB F90000295","price":149.95,"currency_code":"USD","in_stock":true},{"title":"Ti Automotive BKS1001","offer_id":67591221313809,"sku":"TI BKS1001-4","price":799.95,"currency_code":"USD","in_stock":true},{"title":"Walbro GSS342","offer_id":67591221346577,"sku":"WALB GSS342","price":79.95,"currency_code":"USD","in_stock":true},{"title":"17-0031 DIY Fuel Pump Wiring Kit","offer_id":67591221379345,"sku":"17-0031","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/3681\/7425\/files\/Nissan_R34_Fuel_Delivery.png?v=1790638049"}],"url":"https:\/\/autoshopactive.com\/collections\/radium-nissan-infiniti.oembed","provider":"Auto Shop Active","version":"1.0","type":"link"}